Ieee1394 To Ata/atapi Native Bridge

The OXFW900 is a high-performance 1394 to ATA/ATAPI (IDE) native bridge with an integrated target Serial Bus Protocol (SBP-2 ) controller. By supporting the SBP-2 protocol, the device CAN use generic SBP-2 drivers available in the Microsoft Windows 98SE, Microsoft Windows 2000, Microsoft Millennium and Apple MacOS operating systems. The device is ideally suited for smart-cable or tailgate Interface applications for removable-media drives, compact Flash card readers, CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-RAM and hard disk drives, allowing IDE drives to be connected to a 1394 serial bus in a plug-and-play fashion. Both ATA and ATAPI devices are supported using the same firmware. This highly integrated device offers a three-chip solution to native bridge applications using an external 1394 PHY and Flash ROM. A slow 32Kx8 Flash ROM (up to 120ns) is sufficient for most optical media applications. For applications that need a sustained data rate in excess of 10Mbytes per second, for example high performance disk drives, an 8-bit 50ns Flash or faster is recommended. The device is compatible with both 1394-1995 and 1394A PHYs The LINK controller complies with S400 1394-1995 specification. The 1394 transaction layer and SBP-2 protocol is implemented using a combination of the ARM7TDMI (low-power 32-bit RISC processor), an ORB (Operational Request Block) hardware co-processor and a high performance Buffer manager. By Unkown
OXFW900 's PackagesOXFW900 's pdf datasheet



OXFW900 Pinout, Pinouts
OXFW900 pinout,Pin out
This is one package pinout of OXFW900,If you need more pinouts please download OXFW900's pdf datasheet.

OXFW900 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

OXFW900 Pb-Free OXFW900 Cross Reference OXFW900 Schematic OXFW900 Distributor
OXFW900 Application Notes OXFW900 RoHS OXFW900 Circuits OXFW900 footprint
Hot categories