PCA9547 8-channel I2C-bus Multiplexer With Reset

The PCA9547 is an octal bidirectional translating multiplexer controlled by the I2C-bus. The SCL/SDA upstream pair fans out to eight downstream pairs, or channels. Only one SCx/SDx channel CAN be selected at a time, determined by the contents of the programmable control Register The device powers up with Channel 0 connected, allowing immediate Communication between the master and downstream devices on that channel. An active LOW reset input allows the PCA9547 to recover from a situation where one of the downstream I2C-buses is stuck in a LOW state. Pulling the RESET pin LOW resets the I2C-bus state machine causing all the channels to be deselected, except Channel 0 so that the master CAN regain control of the bus. The pass Gates of the multiplexers are constructed such that the VDD pin CAN be used to limit the maximum high voltage which will be passed by the PCA9547. This allows the use of different bus voltages on each pair, so that 1.8 V, 2.5 V, or 3.3 V parts CAN communicate with 5 V parts without any additional protection. External pull-up resistors pull the bus up to the desired voltage level for each channel. All I/O pins are 5 V tolerant.
By NXP Semiconductors
PCA9547 's PackagesPCA9547 's pdf datasheet

PCA9547 Pinout, Pinouts
PCA9547 pinout,Pin out
This is one package pinout of PCA9547,If you need more pinouts please download PCA9547's pdf datasheet.

PCA9547 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

PCA9547 Pb-Free PCA9547 Cross Reference PCA9547 Schematic PCA9547 Distributor
PCA9547 Application Notes PCA9547 RoHS PCA9547 Circuits PCA9547 footprint
Hot categories