PCF85116-3 2048 X 8-bit CMOS EEPROM With I2C-bus Interface

The PCF85116-3 is an 16 kbits (2048 x 8-bit) floating Gate Electrically Erasable Programmable Read Only Memory (EEPROM). By using redundant EEPROM cells it is fault tolerant to single bit errors. In most cases multi bit errors are also covered. This feature dramatically increases reliability compared to conventional EEPROM Memories Power consumption is low due to the full CMOS technology used. The programming voltage is generated on-chip, using a voltage multiplier. As data bytes are received and transmitted via the serial I2C-bus, a package using eight pins is sufficient. Only one PCF85116-3 device is required to support all eight blocks of 256 x 8-bit each. Timing of the E/W cycle is carried out internally, thus no external components are required. A write-protection input at pin 7 (WP) allows disabling of write-commands from the master by a hardware signal. When pin 7 is HIGH, data in the EEPROM are protected. The data bytes received will not be acknowledged by the PCF85116-3 and the EEPROM contents are not changed. Remark: The PCF85116-3 is pin and address compatible to the PCx85xxC-2 family. The PCF85116-3 covers the whole address space of 16 kbits; address inputs are no longer needed. Therefore, pins 1 to 3 are not connected. The write-protection input (WP) is on pin 7.
By NXP Semiconductors
PCF85116 's PackagesPCF85116 's pdf datasheet
PCF85116-3P-01 DIP
PCF85116-3T-01 SO




PCF85116 Pinout, Pinouts
PCF85116 pinout,Pin out
This is one package pinout of PCF85116,If you need more pinouts please download PCF85116's pdf datasheet.

PCF85116 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

PCF85116 Pb-Free PCF85116 Cross Reference PCF85116 Schematic PCF85116 Distributor
PCF85116 Application Notes PCF85116 RoHS PCF85116 Circuits PCF85116 footprint
Hot categories