PCK2510SL 50-150 MHz 1:10 SDRAM Clock Driver

The PCK2510SL is a high-performance, low-skew, low-jitter, phase-locked loop (PLL) Clock Driver It uses a PLL to precisely align, in both frequency and phase, the feedback (FBOUT) output to the Clock (CLK) input signal. It is specifically designed for use with synchronous DRAMs The PCK2510SL operates at 3.3 V VCC and is input compatible with both 2.5 V and 3.3 V input voltage ranges. It also provides integrated series damping resistors that make it ideal for driving point-to-point loads. One bank of ten outputs provides ten low-skew, low-jitter copies of CLK. Output signal duty cycles are adjusted to 50 percent, independent of the duty cycle at CLK. All outputs CAN be enabled or disabled via a single output enable input. When the G input is high, the outputs Switch in phase and frequency with CLK; when the G input is low, the outputs are disabled to the logic-low state. Unlike many products containing PLLs the PCK2510SL does not require external RC networks. The loop Filter for the PLL is included on-chip, minimizing component count, board space, and cost. Because it is based on PLL circuitry, the PCK2510SL requires a stabilization time to achieve phase lock of the feedback signal to the reference signal. This stabilization time is required, following power up and application of a fixed-frequency, fixed-phase signal at CLK, and following any changes to the PLL reference. The PLL CAN be bypassed for test purposes by strapping AVCC to ground. The PCK2510SL is characterized for operation from 0 Cel to +70 Cel.
By NXP Semiconductors
PCK2510SL 's PackagesPCK2510SL 's pdf datasheet



PCK2510SL Pinout, Pinouts
PCK2510SL pinout,Pin out
This is one package pinout of PCK2510SL,If you need more pinouts please download PCK2510SL's pdf datasheet.

PCK2510SL circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

PCK2510SL Pb-Free PCK2510SL Cross Reference PCK2510SL Schematic PCK2510SL Distributor
PCK2510SL Application Notes PCK2510SL RoHS PCK2510SL Circuits PCK2510SL footprint