PCK940L Low Voltage 1 : 18 Clock Distribution Chip

The PCK940L is a 1 : 18 low voltage Clock Distribution chip with 2.5 V or 3.3 V LVCMOS output capabilities. The device features the capability to select either a differential LVPECL or an LVCMOS compatible input. The 18 outputs are 2.5 V or 3.3 V LVCMOS compatible and feature the drive strength to drive 50 Ohm series or parallel terminated transmission lines. With output-to-output skews of 150 ps, the PCK940L is ideal as a Clock Distribution chip for the most demanding of synchronous systems. The 2.5 V outputs also make the device ideal for supplying Clocks for a high performance Microprocessor based design.With a low output impedance of approximately 20 Ohm, in both the HIGH and LOW Logic states, the output Buffers of the PCK940L are ideal for driving series terminated transmission lines. With an output impedance of 20 Ohm, the PCK940L has the capability of driving two series terminated transmission lines from each output. This gives the PCK940L an effective fan-out of 1 : 36. If a lower output impedance is desired, please see the PCK942C data sheet.The differential LVPECL inputs of the PCK940L allow the device to Interface directly with a LVPECL fan-out Buffer like the PCKEP111 to build very wide Clock fan-out trees or to couple to a high frequency Clock source. The LVCMOS input provides a more standard Interface for applications requiring only a single Clock Distribution chip at relatively low frequencies. In addition, the two Clock sources CAN be used to provide for a test Clock Interface as well as the primary system Clock A Logic HIGH on the LVCMOS_CLKSEL pin will select the LVCMOS level Clock input. All inputs of the PCK940L have internal pull-up/pull-down resistors so they CAN be left open if unused.The PCK940L is a single or dual supply device. The device power supply offers a high degree of flexibility. The device CAN operate with a 3.3 V core and 3.3 V output, a 3.3 V core and 2.5 V outputs, as well as a 2.5 V core and 2.5 V outputs. The 32-lead LQFP package was chosen to optimize performance, board space and cost of the device. The 32-lead LQFP package has a 7 mm x 7 mm body size with a conservative 0.8 mm pin spacing.
By NXP Semiconductors
PCK940L 's PackagesPCK940L 's pdf datasheet
PCK940LBD LQFP




PCK940L Pinout, Pinouts
PCK940L pinout,Pin out
This is one package pinout of PCK940L,If you need more pinouts please download PCK940L's pdf datasheet.

PCK940L circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

PCK940L Pb-Free PCK940L Cross Reference PCK940L Schematic PCK940L Distributor
PCK940L Application Notes PCK940L RoHS PCK940L Circuits PCK940L footprint