• Product pinout
  • Description
  • DS21455,DS21455, DS21458 Quad T1/E1/J1 Transceivers
  • The DS21455 and DS21458 are quad monolithic devices featuring independent transceivers that can be software configured for T1, E1, or J1 operation. Each is composed of a line interface unit (LIU), framer, HDLC controllers, and a TDM backplane interface, ...
  • DS33Z41,DS33Z41 Quad IMUX Ethernet Mapper
  • The DS33Z41 extends a 10/100 Ethernet LAN segment by encapsulating MAC frames in HDLC or X.86 (LAPS) for transmission over up to four interleaved PDH/TDM data streams using robust, balanced, and programmable inverse multiplexing. The Interleave Bus (IBO) ...
  • CY7C9689A,? TAXI?-compatible HOTLink Transceiver
  • The CY7C9689A HOTLink Transceiver is a point-to-point communications building block allowing the transfer of data over high-speed serial links (optical fiber, balanced, and unbal- anced copper transmission lines) at speeds ranging between 50 and 200 MBaud. ...
  • CY7B923,? HOTLink Transmitter/Receiver
  • , The CY7B923 HOTLink Transmitter and CY7B933 HOTLink Receiver are point-to-point communications building blocks that transfer data over high-speed serial links (fiber, coax, and twisted pair). Standard HOTLink data rates range from 160 to 330 ...
  • CYP15G0402DXB,Quad HOTLink II? SERDES
  • The CYP15G0402DXB CYV15G0402DXB Quad HOTLink II, SERDES is a point-to-point communications building block allowing the transfer of preencoded data over high-speed serial links (optical fiber, balanced, and unbalanced copper transmission lines) at ...
  • CYP15G0201DXB,Dual-channel HOTLink II? Transceiver
  • The CYP15G0201DXB CYV15G0201DXB CYW15G0201DXB Dual-channel HOTLink II, Transceiver is a point-to-point or point-to-multipoint communi- cations building block allowing the transfer of data over high-speed serial links (optical fiber, balanced, and ...
  • CYP15G0101DXB,Single-channel HOTLink II? Transceiver
  • The CYP15G0101DXB CYV15G0101DXB CYW15G0101DXB single-channel HOTLink II, transceiver is a point-to-point communications building block allowing the transfer of data over a high-speed serial link (optical fiber, balanced, and unbalanced copper ...
  • UPD98408,6-PORT 25M ATM PHY LSI
  • The UPD98408 is an ATM physical layer LSI IC that complies with ATM25 (25.6 Mbps) and which supports TC sublayer and PMD sublayer functions. Interfacing with the ATM layer and AAL layer LSI is implemented at UTOPIA Level 2. ...
  • MT90223,8-Port IMA/TC PHY Device
  • The MT90222, MT90223 & MT90224 family, are multi-rate inverse multiplexing for ATM (IMA) and transmission convergence (TC) devices that process ATM traffic for transmission over T1/E1, fractional T1/E1 and DSL lines. The MT90222, MT90223 & MT90224 ...
  • DP83843BVJE,Phyter - National Semiconductor
  • The DP83843BVJE is a full feature Physical Layer device with integrated PMD sublayers to support both 10BASE-T and 100BASE-X Ethernet protocols. This VLSI device is designed for easy implementation of 10/100 Mb/s Ethernet LANs. It interfaces directly to ...
  • UPD72852,Mos Integrated Circuit - Nec
  • The UPD72852 is a two-port physical layer LSI that complies with the IEEE1394a-2000 specifications. The UPD72852 supports transfers of up to 400 Mbps and consumes less power than the UPD72852 . The UPD72852 is suitable for battery systems with an ...
  • AT78C5091,1-channel Serial ATA PHY
  • The AT78C5091 is a 1-channel SATA PHY supporting Gen 1 speeds of 1.5 Gbps. The IP has been designed based on the requirements stated in the Serial ATA Standard, Rev 1.0a, Jan 2003. On the transmit path, parallel data is registered, passed through a ...
Hot categories