AdvancedTCATM Hot-Swap SiP With V•I Chip EMI Filter

The QPI-10 integrates a total hot-swap function with an EMI Filter for VI Chip applications. The product aligns with the AdvancedTCATM PICMG3.0 require-ments for hot insertion and board level conducted noise limitations. The EMI Filter provides conducted common-mode (CM) and differential-mode (DM) noise attenuation from 150 kHz to 30 MHz. The QPI-10 is designed for use on a 48 or 60 Vdc bus (36 76 Vdc). The inrush current limit and circuit breaker are designed to satisfy the 200 W per board PICMG3.0 limit up to 70C PCB temperature around the QPI-10. The under and overvoltage thresholds CAN be trimmed separately via the UVEN and OV inputs using external series resistors. The QPI-10 provides two Power Good signals, with one referenced to the input ground and the other to the output ground, which CAN be used to enable other circuits along with the VI Chip converter. By Vicor Corp.
QPI-10 's PackagesQPI-10 's pdf datasheet



QPI-10 Pinout, Pinouts
QPI-10 pinout,Pin out
This is one package pinout of QPI-10,If you need more pinouts please download QPI-10's pdf datasheet.

QPI-10 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

QPI-10 Pb-Free QPI-10 Cross Reference QPI-10 Schematic QPI-10 Distributor
QPI-10 Application Notes QPI-10 RoHS QPI-10 Circuits QPI-10 footprint