AdvancedTCATM Hot-Swap SiP With Active EMI Filter

The QPI-8 is the industrys first System-in-a-Package (SiP) designed to integrate a total Hot-Swap function with an active EMI Filter The product aligns with the AdvancedTCA PICMG 3.0 requirements for hot insertion and board level conducted noise limitations. The EMI Filter provides active conducted common-mode (CM) and differential-mode (DM) noise attenuation from 150 kHz to 30 MHz. The QPI-8 is designed for use on a 48 or 60 Vdc bus (36 76 Vdc). The inrush current limit and circuit breaker are designed to satisfy the 200 W per board PICMG 3.0 limit up to 70C PCB temperature around the QPI-8. The undervoltage and overvoltage thresholds CAN be trimmed separately via the UVEN and OV inputs using external series resistors. The Powergood active-high output provides opto-coupler drive for a converters active-low enable (see Figure 9a) or active-high by connecting the Diode in series with the Powergood output (see Figure 9b). The QPI-8 is available in a 25 x 25 x 4.5 mm SiP (System-in-a-Package) with LGA mounting. QPI-8- EVAL1 kits are available for testing the QPI-8. The eveluation board has a mounted QPI-8 with screw terminals for quick in-circuit testing. Check picorpower.com for the QPI-8-EVAL1 evaluation board and the QPI-AN1 Application Note. By Vicor Corp.
QPI-8L 's PackagesQPI-8L 's pdf datasheet



QPI-8L Pinout, Pinouts
QPI-8L pinout,Pin out
This is one package pinout of QPI-8L,If you need more pinouts please download QPI-8L's pdf datasheet.

QPI-8L circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

QPI-8L Pb-Free QPI-8L Cross Reference QPI-8L Schematic QPI-8L Distributor
QPI-8L Application Notes QPI-8L RoHS QPI-8L Circuits QPI-8L footprint