50mA Switched-Cap DC/DC Converter

The REG711 is a switched capacitor voltage converter, which produces a regulated, low ripple output voltage from an unregulated input voltage. A wide input supply voltage of 1.8V to 5.5V makes the REG711 ideal for a variety of battery sources, such as single cell Li-Ion, or two and three cell Nickel or Alkaline based chemistries. The input voltage may vary above and below the output voltage and the output will remain in regulation. It works equally well for step up or down without the need for an inductor, providing low EMI DC/DC conversion. The high switching frequency allows the use of small surface-mount capacitors, saving board space and reducing cost. The REG711 is thermally protected and Current Limited protecting the load and the Regulator during fault conditions. Typical ground pin current (quiescent current) is 1mA at full load, 60uA with no load, and less than 1uA in shutdown mode. This Regulator comes in a thin MSOP-8 package with a component height of less than 1.1mm.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
REG711EA-3.3/250 Texas Instruments 50mA Switched-Cap DC/DC Converter 8-VSSOP -40 to 85
REG711EA-3.3/250G4 Texas Instruments 50mA Switched-Cap DC/DC Converter 8-VSSOP -40 to 85
REG711-33 's PackagesREG711-33 's pdf datasheet
REG711EA-3.3-250 MSOP
REG711EA-3.3-250G4 MSOP
REG711EA-3.3-2K5 MSOP

REG711-33 Pinout, Pinouts
REG711-33 pinout,Pin out
This is one package pinout of REG711-33,If you need more pinouts please download REG711-33's pdf datasheet.

REG711-33 Application circuits
REG711-33 circuits
This is one application circuit of REG711-33,If you need more circuits,please download REG711-33's pdf datasheet.

Related Electronics Part Number

Related Keywords:

REG711-33 Pb-Free REG711-33 Cross Reference REG711-33 Schematic REG711-33 Distributor
REG711-33 Application Notes REG711-33 RoHS REG711-33 Circuits REG711-33 footprint