The TRF1223 is a highly integrated linear transmitter / power amplifier (PA) MMIC. The chip has two 16-dB gain steps that provide a total of 32-dB gain control via 1-bit TTL control signals. The chip also integrates a TTL mute function that turns off the ...
The AD8351 is fully differential amplifier, designed to drive high resolution (10-14 bits) / high speed ADCs (240 MSPS) at IF frequencies within communications receivers.
The AD8351 simplifies ADC driving allowing the user to adjust the gain (up to 26 ...
The AD8352 is a high performance differential amplifier optimized for RF and IF applications. It achieves better than 80 dB SFDR performance at frequencies up to 200 MHz, and 65 dB beyond 500 MHz, making it an ideal driver for high speed 12-bit to 16-bit ...
The AD8302 is a fully integrated RF IC for measuring amplitude and the phase between two independent input signals. The device can be used from low frequencies up to 2.7GHz.
The AD8302 integrates two closely matched wideband logarithmic amplifiers, a wideband ...
The AD8304 is a monolithic logarithmic detector optimized for the measurement of low frequency signal power in fiber optic systems. It uses an advanced translinear technique to provide an exceptionally large dynamic range in a versatile and easily used form. ...
The AD8305 is a low-cost micro miniature logarithmic detector optimized for the determination of optical power in fiber-optic systems. It uses an advanced implementation of a classic translinear (junction-based) method to provide a large dynamic range in a ...
The AD8306 is a complete IF limiting amplifier, providing both
an accurate logarithmic (decibel) measure of the input signal
(the RSSI function) over a dynamic range of 100 dB, and a
programmable limiter output, useful from 5 MHz to 400 MHz. An ...
The AD8307 is the first logarithmic amplifier made available in an 8-lead (SOIC-8) package. It is a complete 500 MHz monolithic demodulating logarithmic amplifier based on the progressive compression (successive detection) technique, providing a dynamic range ...
The AD8309 is a 500 MHz detecting logarithmic amplifier, based on the successive detection technique. This \"log amp\" is useful for received signal strength indication (RSSI) and phase detection in cellular base stations, radar and other radio transceiver ...
The AD8310 is an ultra-fast responding, highly versatile logarithmic amplifier in an 8-lead micro-SO package. It is a complete 400 MHz monolithic demodulating logarithmic amplifier based on the progressive compression (successive compression) technique, ...
The AD8311 is a complete low cost subsystem for the precise control of RF power amplifiers operating in the frequency range 0.1 GHz - 2.5 GHz and over a typical dynamic range of 50 dB. It is intended for use in cellular handsets and other battery-operated ...
The AD8353 is a broadband, fixed-gain, linear amplifier that operates at frequencies from 1 MHz up to 2.7 GHz. It is intended for use in a wide variety of wireless devices, including cellular, broadband, CATV, and LMDS/MMDS applications. By taking ...
The AD8354 is a broadband, fixed-gain, linear amplifier that operates at frequencies from 1 MHz up to 2.7 GHz. It is intended for use in a wide variety of wireless devices, including cellular, broadband, CATV, and LMDS/MMDS applications. By taking ...
The ADL5320 is a broadband, linear pre-driver RF amplifier that operates at frequencies from 400 MHz to 2700 MHz. The device can be used in a wide variety of wired and wireless applications, including ISM, WLL, PCS, GSM, CDMA and WCDMA. The ADL5320 ...
The ADL5521 is a high performance GaAs pHEMT low-noise amplifier. It provides high gain and low noise figure for single down-conversion IF sampling receiver architecture as well as direct down conversion receivers. The ADL5521 amplifier comes in a ...
The ADL5523 is a high performance GaAs pHEMT low-noise amplifier. It provides high gain and low noise figure for single down-conversion IF sampling receiver architectures as well as direct down conversion receivers. The ADL5523 amplifier comes in a ...
The AD9864 is a general-purpose IF subsystem that digitizes a low level 10 MHz to 300 MHz IF input with a signal bandwidth ranging from 6.8 kHz to 270 kHz. The signal chain of the AD9864 consists of a low noise amplifier (LNA), a mixer, a band-pass - ...
The AD9874 is a general purpose IF subsystem that digitizes a low level 10-300MHz IF input signal with a bandwidth of up to 270 kHz. The signal chain of the AD9874 contains a low-noise amplifier, mixer, a band pass sigma-Delta analog-to-digital converter and a ...
This device MMBFJ310 is designed for VHF/UHF amplifier, oscillator and mixer
applications. As a common gate amplifier, 16 dB at 100 MHz and
12 dB at 450 MHz can be realized. Sourced from Process 92.
...
The ISL55005, ISL55007, ISL55008 and ISL55009, ISL55010, ISL55011 constitute a family of high performance gain blocks featuring a Darlington configuration using high ft transistors and excellent thermal performance. They are an ideal choice for DVB-S LNB cable ...
The ISL55005, ISL55007, ISL55008 and ISL55009, ISL55010, ISL55011 constitute a family of high performance gain blocks featuring a Darlington configuration using high ft transistors and excellent thermal performance. They are an ideal choice for DVB-S LNB cable ...
The ISL55005, ISL55007, ISL55008 and ISL55009, ISL55010, ISL55011 constitute a family of high performance gain blocks featuring a Darlington configuration using high ft transistors and excellent thermal performance. They are an ideal choice for DVB-S LNB cable ...
The ISL55005, ISL55007, ISL55008 and ISL55009, ISL55010, ISL55011 constitute a family of high performance gain blocks featuring a Darlington configuration using high ft transistors and excellent thermal performance. They are an ideal choice for DVB-S LNB cable ...
The ISL55005, ISL55007, ISL55008 and ISL55009, ISL55010, ISL55011 constitute a family of high performance gain blocks featuring a Darlington configuration using high ft transistors and excellent thermal performance. They are an ideal choice for DVB-S LNB cable ...
The ISL55005, ISL55007, ISL55008 and ISL55009, ISL55010, ISL55011 constitute a family of high performance gain blocks featuring a Darlington configuration using high ft transistors and excellent thermal performance. They are an ideal choice for DVB-S LNB cable ...
The ISL55012 is a high performance gain block featuring a Darlington configuration using high fT transistors and excellent thermal performance. They are an ideal choice for DVB-S LNB cable receiver applications. Other members of the family include:
The ISL55013 is a high performance gain block featuring a Darlington configuration using high fT transistors and excellent thermal performance. They are an ideal choice for DVB-S LNB cable receiver applications. Other members of the family include: ...
The ISL55014 is a high performance gain block featuring a Darlington configuration using high fT transistors and excellent thermal performance. They are an ideal choice for DVB-S LNB cable receiver applications. Other members of the family include: ...
The ISL55015 is a high performance gain block featuring a Darlington configuration using high fT transistors and excellent thermal performance. They are an ideal choice for DVB-S LNB cable receiver applications. Other members of the family includes:
BGA2714 MMIC wideband amplifier,Silicon Monolitic Microwave Integrated Circuit (MMIC) wideband amplifier with internal
matching circuit in a 6-pin SOT363 plastic SMD package.
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care ...
BGA2715 MMIC wideband amplifier,Silicon Monolithic Microwave Integrated Circuit (MMIC) wideband amplifier with internal
matching circuit in a 6-pin SOT363 SMD plastic package.
CAUTION
This device is sensitive to electrostatic discharge (ESD). Therefore care ...
BGA2716 MMIC wideband amplifier,Silicon Monolithic Microwave Integrated Circuit (MMIC) wideband amplifier with internal
matching circuit in a 6-pin SOT363 SMD plastic package.
CAUTION
This device is sensitive to electrostatic discharge (ESD). Therefore care ...
BGA2717 MMIC wideband amplifier,Silicon Monolithic Microwave Integrated Circuit (MMIC) wideband amplifier with internal
matching circuit in a 6-pin SOT363 SMD plastic package.
CAUTION
This device is sensitive to electrostatic discharge (ESD). Therefore care ...
BGA6289 MMIC wideband medium power amplifier,Silicon Monolithic Microwave Integrated Circuit (MMIC)
wideband medium power amplifier with internal matching
circuit in a 4-pin SOT89 plastic low thermal resistance
SMD package.
The BGA6x89 series of medium ...
BGA6489 MMIC wideband medium power amplifier,Silicon Monolithic Microwave Integrated Circuit (MMIC)
wideband medium power amplifier with internal matching
circuit in a 4-pin SOT89 plastic low thermal resistance
SMD package.
The BGA6x89 series of medium ...
BGE788 750 MHz, 34 dB gain push-pull amplifier,Hybrid high dynamic range amplifier module in a SOT115J package operating at a supply
voltage of 24 V (DC). The module consists of two cascaded stages both in cascode
configuration.
CAUTION
This device is ...
BGE885 860 MHz, 17 dB gain push-pull amplifier,Hybrid amplifier module for use in
CATV systems operating over a
frequency range of 40 to 860 MHz
with a voltage supply of 24 V (DC).
...
BGM1013 MMIC wideband amplifier,Silicon Monolithic Microwave Integrated Circuit (MMIC) wideband amplifier with internal
matching circuit in a 6-pin SOT363 SMD plastic package.
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care ...
BGM1014 MMIC wideband amplifier,Silicon Monolithic Microwave Integrated Circuit (MMIC) wideband amplifier with internal
matching circuit in a 6-pin SOT363 SMD plastic package.
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care ...
BGS67A 65 MHz, 25.5 dB gain reverse amplifier,Hybrid high dynamic range amplifier module in a leadless SOT567A package, operating at
a supply voltage of 12 V.
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be ...
BGY1085A 1000 MHz, 18.5 dB gain push-pull amplifier,Hybrid high amplifier module for
CATV systems operating over a
frequency range of 40 to 1000 MHz
at a supply voltage of +24 V (DC).
...
BGY585A 550 MHz, 18.2 dB gain push-pull amplifier,Hybrid amplifier module for CATV systems operating over a frequency range of
40 MHz to 550 MHz at a voltage supply of 24 V (DC). Intended for use as a final amplifier.
...
BGY587B 550 MHz, 27 dB gain push-pull amplifier,Hybrid amplifier module for CATV
systems operating over a frequency
range of 40 to 550 MHz at a voltage
supply of +24 V (DC).
...
BGY587 550 MHz, 22 dB gain push-pull amplifier,Hybrid amplifier module in a SOT115J package, operating at a supply voltage of 24 V. The
BGY587 is intended for use as a final amplifier.
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). ...
BGY588C 550 MHz, 34.5 dB gain push-pull amplifier,Hybrid amplifier module operating at a supply voltage of 24 V (DC) in a SOT115J
package.
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport ...
Hybrid high dynamic range amplifier module designed for applications in CATV systems
with a bandwidth of 5 MHz to 120 MHz operating with a voltage supply of 24 V (DC).
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should ...
BGY67A 200 MHz, 24 dB gain reverse amplifier,Hybrid high dynamic range amplifier module in a SOT115J package operating at a voltage
supply of 24 V (DC).
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be ...
BGY685A 600 MHz, 18.2 dB gain push-pull amplifier,Special super-high dynamic range amplifier module
designed for applications in CATV systems with a
bandwidth of 40 to 600 MHz operating at a voltage supply
of 24 V (DC).
...
BGY687 600 MHz, 21.5 dB gain push-pull amplifier,Hybrid high dynamic range amplifier module designed for
CATV systems operating over a frequency range of
40 to 600 MHz at a voltage supply of 24 V (DC).
...
BGY68 75 MHz, 30 dB gain reverse amplifier,Hybrid high dynamic range amplifier module in a SOT115J package operating at a voltage
supply of 24 V (DC).
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during ...
BGY785A 750 MHz, 18.5 dB gain push-pull amplifier,Hybrid high dynamic range cascode amplifier module in a SOT115J package operating
with a voltage supply of 24 V (DC).
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should ...
BGY787 750 MHz, 21.5 dB gain push-pull,Hybrid amplifier module in a SOT115J package operating with a voltage supply of
24 V (DC).
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport and ...
BGY883 860 MHz, 15 dB gain push-pull amplifier,Hybrid amplifier module designed for
CATV systems operating over a
frequency range of 40 to 860 MHz at
a voltage supply of 24 V (DC).
...
BGY885A 860 MHz, 18.5 dB push-pull amplifier,Hybrid amplifier module for CATV systems operating over a frequency range of 40 MHz
to 860 MHz with a supply voltage of 24 V (DC).
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care ...
BGY887B CATV amplifier module,Hybrid amplifier module in a
SOT115J package operating with a
voltage supply of 24 V (DC). This high
gain module consists of two cascaded
stages, both in cascode
configuration.
...
BGY887 860 MHz, 21.5 dB gain push-pull amplifier,Hybrid dynamic range amplifier
module in a SOT115J package
operating with a voltage supply of
24 V (DC).
...
BGY888 860 MHz, 34 dB gain push-pull amplifier,Hybrid high dynamic range amplifier module operating
with a voltage supply of 24 V in a SOT115J package. The
high gain module consists of two cascaded stages both in
cascode configuration.
...
CGY887B 860 MHz, 27.8 dB gain push-pull amplifier,Hybrid dynamic range amplifier module in a SOT115J
package operating at a voltage supply of 24 V (DC),
employing both GaAs and Si dies.
...
Hybrid high dynamic range amplifier module in SOT115BA package operating at a supply
voltage of 24 V (DC).
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport and handling.
...
The SA5209 represents a breakthrough in monolithic amplifier design featuring several innovations. This unique design has combined the advantages of a high speed bipolar process with the proven Gilbert architecture. The SA5209 is a linear broadband RF ...
The SA5219 represents a breakthrough in monolithic amplifier design featuring several innovations. This unique design has combined the advantages of a high speed bipolar process with the proven Gilbert architecture.The SA5219 is a linear broadband RF amplifier ...
The TDA1593 provides IF amplification, symmetrical quadrature demodulation and level detection for quality FM car radio receivers and is suitable for mono and stereo reception. It may also be applied to common front ends, stereo decoders and AM receivers ...
The TDA1597 provides IF amplification, symmetrical quadrature demodulation and level detection for quality home and car FM radio receivers and is suitable for mono and stereo reception. It may also be applied to common front-ends, stereo decoders and AM ...
The TSH690 is a wide band RF amplifier, de-
signed in advanced bipolar process. At 450 MHz,
it features 28dB gain and +13.5dBm (20 mW) out-
put power at 3V. At 900 MHz, it features 23 dB
gain and +15.5 dBm (35 mW) output power at 3V. ...
The MMG3002NT1 is a General Purpose Amplifier that is internally
input and output matched. It is designed for a broad range of Class A,
small -signal, high linearity, general purpose applications. It is suitable for
applications with frequencies from 40 to ...
The MMG3003NT1 is a General Purpose Amplifier that is internally
input matched and internally output prematched. It is designed for a broad
range of Class A, small -signal, high linearity, general purpose applica-
tions. It is suitable for applications with ...
The MMG3004NT1 is a General Purpose Amplifier that is internally
prematched and designed for a broad range of Class A, small -signal, high
linearity, general purpose applications. It is suitable for applications with
frequencies from 400 to 2200 MHz such as ...
The MMG3005NT1 is a General Purpose Amplifier that is internally
prematched and designed for a broad range of Class A, small -signal, high
linearity, general purpose applications. It is suitable for applications with
frequencies from 800 to 2200 MHz such as ...
The MMG3006NT1 is a General Purpose Amplifier that is internally in-
put prematched and designed for a broad range of Class A, small -signal,
high linearity, general purpose applications. It is suitable for applications
with frequencies from 400 to 2400 MHz ...
The MMG3007NT1 is a General Purpose Amplifier that is internally
input and output matched. It is designed for a broad range of Class A,
small -signal, high linearity, general purpose applications. It is suitable
for applications with frequencies from 0 to ...
The MMG3008NT1 is a General Purpose Amplifier that is internally
input and output matched. It is designed for a broad range of Class A,
small -signal, high linearity, general purpose applications. It is suitable
for applications with frequencies from 0 to ...
The MMG3009NT1 is a General Purpose Amplifier that is internally
input and output matched. It is designed for a broad range of Class A,
small -signal, high linearity, general purpose applications. It is suitable
for applications with frequencies from 0 to ...
The MMG3010NT1 is a General Purpose Amplifier that is internally
input and output matched. It is designed for a broad range of Class A,
small -signal, high linearity, general purpose applications. It is suitable
for applications with frequencies from 0 to ...
The MMG3011NT1 is a General Purpose Amplifier that is internally
input and output matched. It is designed for a broad range of Class A,
small -signal, high linearity, general purpose applications. It is suitable
for applications with frequencies from 0 to ...
The MMG3012NT1 is a General Purpose Amplifier that is internally
input matched and internally output matched. It is designed for a broad
range of Class A, small -signal, high linearity, general purpose applica-
tions. It is suitable for applications with ...
The MMG3013NT1 is a General Purpose Amplifier that is internally
input matched and internally output matched. It is designed for a broad
range of Class A, small -signal, high linearity, general purpose applica-
tions. It is suitable for applications with ...
The MMG3015N is a General Purpose Amplifier that is internally Input
and output matched. It is designed for a broad range of Class A,
small -signal, high linearity, general purpose applications. It is suitable for
applications with frequencies from 0 ...
The MMH3111NT1 is a General Purpose Amplifier that is internally
input and output prematched. It is designed for a broad range of Class A,
small -signal, high linearity, general purpose applications. It is suitable
for applications with frequencies from 250 ...
Designed for ultra- linear amplifier applications in 50 ohm systems operating
in the PCS frequency band. A silicon FET Class A design provides outstanding
linearity and gain. In addition, the excellent group delay and phase linearity
characteristics are ...
