The RMPA0959 power amplier module (PAM) is designed for
cellular band AMPS, CDMA and CDMA2000-1X applications.
The 2 stage PAM is internally matched to 50
to minimize the
use of external components and features a low-power mode to
reduce standby ...
The RMPA0967 power amplifier module (PAM) is designed for
cellular band AMPS, CDMA, CDMA2000-1X, WCDMA and
HSDPA applications. The 2 stage PAM is internally matched to
50 Ohms to minimize the use of external components and fea-
tures a low-power mode to ...
The RMPA1765 power amplier module (PAM) is designed for
Korean CDMA, CDMA2000-1X and WCDMA personal commu-
nications system (PCS) applications. The 2 stage PAM is inter-
nally matched to 50 Ohms to minimize the use of external
components and features a ...
The RMPA1959 power amplifier module (PAM) is designed
for CDMA and CDMA2000-1X personal communications
system (PCS) applications. The 2 stage PAM is internally
matched to 50 to minimize the use of external
components and features advanced DC ...
The RMPA1965 power amplifier module (PAM) is designed for
CDMA, CDMA2000-1X, WCDMA and HSDPA personal commu-
nications system (PCS) applications. The 2 stage PAM is inter-
nally matched to 50 to minimize the use of external
components and features a ...
The RMPA1966 Power Amplier Module (PAM) is
Fairchilds latest innovation in 50 matched, surface
mount modules targeting UMTS/WCDMA/HSDPA
applications. Answering the call for ultra-low DC power
consumption and extended battery life in portable
electronics, ...
The RMPA2259 power amplifier module (PAM) is designed
for WCDMA/UTMS and HSDPA applications. The 2-stage
PAM is internally matched to 50 to minimize the use of
external components and features a low-power mode to
reduce standby current and DC power ...
The RMPA2265 power amplier module (PAM) is designed for
WCDMA/HSDPA applications in both the 18501910 and 1920
1980 MHz bands. The 2 stage PAM is internally matched to 50
Ohms to minimize the use of external components and features
a low-power mode to ...
The RMPA5255 power amplier module is designed for high
performance WLAN applications in the 4.95.9 GHz frequency
band. The 10 pin, 5 x 5 x 1.5 mm package with internal match-
ing on both input and output to 50, and internal bias network
components, allow ...
The MMM5063 is a tri-band single supply RF Power Amplifier for GSM900/DCS1800/
PCS1900 GPRS handheld radios. This fully integrated Power Amplifier uses a patented
concept to realize the 50 matching on-chip through integration of passives on the GaAs
die. ...
The MMM6025 is a 50 Tx Power Amplifier
Front-End Module for quad- and tri-band GSM/GPRS
handset applications, functioning over the GSM850,
EGSM, DCS, and PCS transmit and receive frequency
bands. It is compatible with GSM/GPRS Class 12
operating ...
The MMM6035 is a 50 Power Amplifier module for
quad-, tri-, and dual-band GSM handset applications,
functioning over the GSM850, EGSM, DCS, and PCS
frequency bands. This module is compatible with
GSM/GPRS operating modes (up to 50% duty cycle). To ...
The SKY77321 Power Amplifier Module (PAM) is designed in a compact form factor for tri-band
cellular handsets comprising EGSM900, DCS1800, and PCS1900 operation. It also supports Class 12
General Packet Radio Service (GPRS) multislot operation.
The PAM ...
The RF3196 is a high-power, high-efficiency power amplifier module with integrated
power control that provides over 50dB of control range. The device is a self-con-
tained 6mmx6mm module with 50 input and output terminals. The device is
designed for use as ...
