The AD6650 is a diversity intermediate frequency-to-baseband(IF-to-baseband) receiver for GSM/EDGE. This narrow-band receiver consists of an integrated DVGA, IF-to-baseband I/Q demodulators, low-pass filtering, and a dual wideband ADC. The chip can accommodate ...
The chipset comprises Analog Devices\' AD6600
dual-channel IF sampling analog-to-digital
converter and AD6620 dual-channel decimating
receiver chip. Configured with the appropriate
external components, it can address a variety of
air interface standards, ...
The AD6624 is a four-channel (quad) digital receive signal
processor (RSP) with four cascaded signal-processing elements
a frequency translator, two fixed-coefficient decimating filters,
and a programmable-coefficient decimating filter. ...
The AD6624A is available in a 196-Lead BGA package.
Applications
Wireless Infrastructure: Cellular, PCS, In-Building, WLL
GSM, IS-136, AMPS, PHS, EDGE
Phased Array Antenna Systems
Software Programmable Digital Receivers
Communications and ...
The AD6634 is a two channel (dual) digital Receive Signal Processor (RSP) with four cascaded signal-processing elements: a frequency translator, two fixed-coefficient decimating filters, and a programmable coefficient-decimating filter. A 16-bit parallel ...
The AD6635 is a multi-mode eight channel digital Receive
Signal Processor (RSP) capable of processing up to four
WCDMA channels. Each channel consists of four cascaded
signal-processing elements: a frequency translator, two CIC
decimating filters, and a ...
The AD6652 is a mixed-signal IF to baseband receiver consisting of dual 12-bit MSPS ADCs and a wideband multimode digital downconverter (DDC). The AD6652 is designed to support communications applications where low cost, small size, and versatility are ...
The AD6654 is a mixed-signal IF to base band receiver consisting of a
14-bit, 92.16 MSPS analog-to-digital converter (ADC) and a four/six channel,
multi-mode digital down converter (DDC) capable of
processing up to six WCDMA (Wideband Code Division ...
rfRXD0420 The rfRXD0420/rfRXD0920 are low cost, compact single frequency short-range radio receivers requiring only a minimum number of external components for a complete receiver system. The rfRXD0420 covers the receive frequency range of 300 MHz to 450 MHz ...
rfRXD0920 The rfRXD0420/rfRXD0920 are low cost, compact single frequency short-range radio receivers requiring only a minimum number of external components for a complete receiver system. The rfRXD0420 covers the receive frequency range of 300 MHz to 450 MHz ...
The UAA3201T is a fully integrated single-chip receiver,
primarily intended for use in VHF and UHF systems
employing direct AM Return-to-Zero (RZ) Amplitude Shift
Keying (ASK) modulation.
...
The TDA1072A integrated AM receiver circuit performs the active and part of the filtering functions of an AM radio
receiver. It is intended for use in mains-fed home receivers and car radios. The circuit can be used for oscillator
frequencies up to 50 MHz ...
The TDA1572T integrated AM receiver circuit performs all the active functions and part of the filtering required of an AM radio receiver. It is intended for use in mains-fed home receivers and car radios. The circuit can be used for oscillator frequencies up ...
The LT5504 is an 800MHz to 2700MHz monolithic integrated measuring receiver, capable of detecting a wide dynamic range RF signal from -75dBm to +5dBm. The logarithm of the RF signal is precisely converted into a linear DC voltage. The LT5504 consists of RF/IF ...
The LT5500 is a receiver front end IC designed for low voltage operation. The chip contains a low noise amplifier (LNA), a Mixer and an LO buffer. The IC is designed to operate over a power supply voltage range from 1.8V to 5.25V. The LNA can be set to ...
The TDA7514 is a device for car-radio applications
that combines full RF front-end functions with ad-
vanced audio-processing capabilities.
As far as FM and AM functions are concerned, the
TDA7514 features front-end processing, including
the digital ...
The MC33596 is a highly integrated receiver
designed for low-voltage applications. It includes a
programmable PLL for multi-channel applications,
an RSSI circuit, a strobe oscillator that periodically
wakes up the receiver while a data manager checks ...
The T4260 is an advanced AM/FM receiver with integrated fast PLL as a single-chip
,
solution based on Atmel s high-performance BICMOS II technology. The low-imped
ance driver at the IF output is designed for the A/D of a digital IF. The fast tuning
concept ...
The ATR4255 is a highly integrated AM/FM front-end circuit manufactured using
Atmels advanced BICMOS technology. It represents a complete, automatically adjust
able AM/FM front end, containing a double-conversion system for FM and an
up/down-conversion ...
The ATR4258 is a highly integrated AM/FM front-end circuit manufactured using
Atmels advanced BICMOS technology. It represents a complete, automatically
adjustable AM/FM front end, containing a double-conversion system for FM and an
up/down-conversion ...
The ATR2730 is a monolithically integrated L-band down-converter circuit fabricated
,
with Atmel s advanced UHF5S technology. This IC covers all functions of an L-ban
down-converter in a DAB receiver. The device includes a gain-controlled amplifier, ...
The ATR4255P is a highly integrated AM/FM front-end circuit manufactured using
Atmels advanced BiCMOS technology. It represents a complete, automatically
adjustable AM/FM front end, containing a double-conversion system for FM and an
up/down-conversion ...
The ATA3741 is a multi-chip PLL receiver device supplied in an SO20 package. It has
been specially developed for the demands of RF low-cost data transmission systems
with low data rates from 1 kBaud to 10 kBaud (1 kBaud to 3.2 kBaud for FSK) in
Manchester ...
The ATA3742 is a multi-chip PLL receiver device supplied in an SO20 package. It has
been specially developed for the demands of RF low-cost data transmission systems
with data rates from 1 kBaud to 10 kBaud (1 kBaud to 3.2 kBaud for FSK) in
,
Manchester or ...
The ATA3745 is a multi-chip PLL receiver device supplied in an SO20 package. It has
been specially developed for the demands of RF low-cost data transmission systems
with low data rates from 1 kBaud to 10 kBaud in Manchester or Bi-phase code. The
receiver ...
The ATA5760/ATA5761 is a multi-chip PLL receiver device supplied in an SO20 pack-
age. It has been especially developed for the demands of RF low-cost data
transmission systems with data rates from 1 kBaud to 10 kBaud in Manchester or
Bi-phase code. The ...
The ATA5744 is a PLL receiver device for the receiving range of f = 300 MHz to
0
450 MHz. It is developed for the demands of RF low-cost data communication sys-
tems with low data rates and fits for most types of modulation schemes including
Manchester, ...
The ATA5282 is a 125-kHz ultra low power receiver IC with three input channels for
Passive Entry Go applications. It includes all circuits for an LF wake-up channel. The
three sensitive input stages of the IC amplifier demodulate and measure the input ...
The ATA5743 is a multi-chip PLL receiver device supplied in an SSO20 package. It
has been especially developed for the demands of RF low-cost data transmission sys-
tems with data rates from 1 kBaud to 10 kBaud in Manchester or Bi-phase code. The
receiver ...
The ATA5745/ATA5746 is a UHF ASK/FSK transparent receiver IC with low power consumption
supplied in a small QFN24 package (body 5 mm ,5 mm, pitch 0.65 mm). ATA5745 is used in
the 433 MHz to 435 MHz band of operation, and ATA5746 in 313 MHz to 317 MHz. The IC ...
The ATA5723/ATA5724/ATA5728 is a multi-chip PLL receiver device supplied in an SSO20
package. It has been specially developed for the demands of RF low-cost data transmission sys-
tems with data rates from 1 kBit/s to 10 kBbit/s in Manchester or Bi-phase ...
The ATA8201/ATA8202 is a UHF ASK/FSK transparent receiver IC with low power consumption
supplied in a small QFN24 package (body 5 mm ,5 mm, pitch 0.65 mm). ATA8202 is used in
the 433 MHz to 435 MHz band of operation, and ATA8201 in 313 MHz to 317 MHz. ...
1-D LF Receiver IC for 125 kHz, 1.3 A Current Consumption in Active Listening Mode The ATA5283 is a 125 kHz ultra-low power receiver used for the wake-up function of
Tire Pressure Monitoring (TPM) application. The sensitive input stage of the IC ampli-
fies ...
The MAX2140 complete receiver is designed for satellite
digital audio radio services (SDARS). The device
includes a fully monolithic VCO and only needs a SAW at
the IF and a crystal to generate the reference frequency. To form a complete SDARS radio, ...
The MAX1471 low-power, CMOS, superheterodyne, RF
dual-channel receiver is designed to receive both amplitude-
shift-keyed (ASK) and frequency-shift-keyed (FSK)
data without reconfiguring the device or introducing any
time delay normally associated with ...
The MAX7042 fully integrated, low-power, CMOS superheterodyne RF Receiver is designed to receive frequency-shift-keyed (FSK) data at rates up to 66kbps nonreturn-to-zero (NRZ) (33kbps Manchester). The MAX7042 requires only a few external components to realize ...
The MAX1473 fully integrated low-power CMOS superheterodyne
receiver is ideal for receiving amplitude-shift-keyed (ASK) data in the 300MHz to 450MHz
frequency range. Its signal range is from -114dBm to
0dBm. With few external components and a ...
The MAX7033 fully integrated low-power CMOS superheterodyne
receiver is ideal for receiving amplitude-shift-keyed (ASK) data in the 300MHz to 450MHz frequency range. The receiver has an RF input signal
range of -114dBm to 0dBm. With few external ...
The MAX2440/MAX2441/MAX2442 highly integrated front-end receiver ICs provide the lowest cost solution for cordless phones and ISM-band radios operating in the 900MHz band. All devices incorporate receive image-reject mixers to reduce filter cost. They operate ...
The MAX2440/MAX2441/MAX2442 highly integrated front-end receiver ICs provide the lowest cost solution for cordless phones and ISM-band radios operating in the 900MHz band. All devices incorporate receive image-reject mixers to reduce filter cost. They operate ...
The MAX2440/MAX2441/MAX2442 highly integrated front-end receiver ICs provide the lowest cost solution for cordless phones and ISM-band radios operating in the 900MHz band. All devices incorporate receive image-reject mixers to reduce filter cost. They operate ...
The MAX2424/MAX2426 highly integrated front-end ICs provide the lowest cost solution for cordless and ISM-band radios operating in the 900MHz band. Both devices incorporate a receive image-reject mixer (to reduce filter cost) as well as a versatile transmit ...
The MAX2424/MAX2426 highly integrated front-end ICs provide the lowest cost solution for cordless and ISM-band radios operating in the 900MHz band. Both devices incorporate a receive image-reject mixer (to reduce filter cost) as well as a versatile transmit ...
The MAX2700/MAX2701 are highly integrated direct downconversion (zero-IF) receivers designed for wideband wireless local loop (WLL) systems operating in the 1.8GHz to 2.5GHz band. The MAX2700/MAX2701s zero-IF architecture eliminates the need for IF ...
The MAX2700/MAX2701 are highly integrated direct downconversion (zero-IF) receivers designed for wideband wireless local loop (WLL) systems operating in the 1.8GHz to 2.5GHz band. The MAX2700/MAX2701s zero-IF architecture eliminates the need for IF ...
The MAX1470 is a fully integrated low-power CMOS superheterodyne receiver for use with amplitude-shift-keyed (ASK) data in the 315MHz band. With few required external components, and a low-current power-down mode, it is ideal for cost- and power-sensitive ...
The MAX2390-MAX2393/MAX2396/MAX2400 (referred to as the MAX2390 family) fully integrated direct-conversion receiver ICs are designed for W-CDMA and TDSCDMA applications.
The MAX2390 family of receiver ICs have over 90dB of dynamic gain control, and typical ...
The MAX2390-MAX2393/MAX2396/MAX2400 (referred to as the MAX2390 family) fully integrated direct-conversion receiver ICs are designed for W-CDMA and TDSCDMA applications.
The MAX2390 family of receiver ICs have over 90dB of dynamic gain control, and typical ...
The MAX2390-MAX2393/MAX2396/MAX2400 (referred to as the MAX2390 family) fully integrated direct-conversion receiver ICs are designed for W-CDMA and TDSCDMA applications.
The MAX2390 family of receiver ICs have over 90dB of dynamic gain control, and typical ...
The MICRF001 is a single chip OOK (ON-OFF Keyed) Receiver IC for remote wireless applications, employing Micrels latest QwikRadio technology. This device is a true antenna-in, data-out monolithic device. All RF and IF tuning is accomplished automatically ...
The MICRF002 is a single chip ASK/OOK (ON-OFF Keyed)
RF Receiver IC. This device is a true antenna-in to data-out
monolithic device. All RF and IF tuning is accomplished
automatically within the IC which eliminates manual tuning
and reduces production ...
The MICRF005 QwikRadio UHF receiver is a single-chip OOK (on-off keyed) receiver IC for remote wireless applications. This device is a true single-chip, antenna-in, data-out device. All RF and IF tuning is accomplished automatically within the IC which ...
The MICRF007 is a single chip ASK/OOK (ON-OFF Keyed) Receiver IC for remote wireless applications, employing Micrels latest QwikRadiotm technology. This device is a true antenna-in to data-out monolithic device. All RF and IF tuning is accomplished ...
The MICRF008 QwikRadio UHF receiver is a single-chip OOK (on-off keyed) receiver IC designed for remote wireless applications. This device is a true single-chip, \"antenna-in, data-out\" device, and it is easy to implement. MICRF008 receiver requires very few ...
The MICRF009 is a single chip, ASK/OOK (ON-OFF Keyed) RF Receiver IC. It provides the same function but with performance enhancements over earlier QwikRadio receivers. Two key improvements are: higher sensitivity (typically 6dB higher than the MICRF002) and ...
The MICRF010 is a single chip, ASK/OOK (ON-OFF Keyed) RF Receiver IC recommended for new designs replacing the MICRF007. It provides the same function with sensitivity enhancement, typically 6dB better than the MICRF007. Just like all other members of the ...
The MICRF011, an enhanced version of the MICRF001, is a single chip OOK (ON-OFF Keyed) Receiver IC for remote wireless applications, employing Micrels latest QwikRadiotm technology. This device is a true \"antenna-in, data-out\" monolithic device. All RF and ...
The MICRF211 is a general purpose, 3V QwikRadio
Receiver that operates at 433.92MHz with typical
sensitivity of -110dBm.
The MICRF211 functions as a super-heterodyne
receiver for OOK and ASK modulation up to 10kbps.
The down-conversion mixer ...
The MICRF213 is a general purpose, 3.3V QwikRadio
Receiver that operates at 315MHz with typical sensitivity
of -110dBm.
The MICRF213 functions as a super-heterodyne
receiver for OOK and ASK modulation up to 7.2kbps.
The down-conversion mixer also ...
Micrels MICRF218 is the worlds first integrated ASK
OOK receiver with selectable dual IF bandwidths for
300~450 MHz operation. The receiver architecture is
super-heterodyne. The MICRF218 has fully integrated
IF section with image rejection to bring ...
The IC TDA5200 is a very low power consump-
tion single chip ASK Single Conver-
sion Receiver for the frequency bands
868-870 MHz and 433-435 MHz. The
IC offers a high level of integration and
needs only a few external compo-
nents. The device ...
The IC TDA5201 is a very low power consumption single chip ASK Superheterodyne
Receiver (SHR) for the frequency bands 315 and 345MHz. The SHR offers a
high level of integration and needs only a few external components. The device
contains a low noise ...
The IC TDA5210 is a very low power consump-
tion single chip FSK/ASK Superhet-
erodyne Receiver (SHR) for the
frequency bands 810 to 870 MHz and
400 to 440 MHz that is pin compatible
with the ASK Receiver TDA5200. The
IC offers a high level of ...
The IC TDA5220 is a very low power consumption single chip FSK/ASK Superheterodyne
Receiver (SHR) for the frequency bands 810 to 870 MHz and 400 to 440 MHz. The IC
offers a high level of integration and needs only a few external components. The ...
Receiver ASK/FSK Single Conversion Receiver ,The IC TDA5221 is a very low power consumption single chip FSK/ASK Superheterodyne
Receiver (SHR) for the frequency band 300 to 340 MHz. The IC offers a high level of
integration and needs only a few external ...
The TDA5230
TDA5231 is a family of universal, highly sensitive, low-power single-chip ASK/FSK
superheterodyne image-reject-receivers for Manchester-coded data signals in the ISM bands
between 302..320 MHz, 433..450 MHz and 865..870 MHz. The chips include ...
The SKY74693 is a highly integrated, single IF receiver intended for use in CDMA phones operating in PCS, cellular CDMA, AMPS, and GPS modes.
Except for the SAW filters and matching components, the device incorporates everything required to implement the ...
AS3931 is an ultra low power, three channel LF ASK receiver designed to operate in various applications such as LF identification systems and LF tag receivers. AS3931 is able to detect a low frequency ASK-modulated signal by looking for a digital wake-up ...
The TQ5122 is a 3V, RF Receiver IC designed specifically for Cellular band TDMA
applications. Its RF performance meets the requirements for products designed to th
IS-136 TDMA and the AMPS standards. The TQ5122 includes a powerdown mod
which allows ...
The TQ5135 is an LNA-Downconverter optimized for use in the Korean,
Japanese, and US CDMA Bands. The integrated LNA has the gain step function
required for CDMA, and features very low NF and excellent IP3. An external
resistor controls LNA bias, making ...
The TQ5622 is a 3V, RF Receiver IC designed specifically for PCS band TDMA
applications. Its RF performance meets the requirements for products designed to th
IS-136 TDMA standards. The TQ5622 includes a powerdown mode which allow
current saving during ...
The TQ9203 RFIC Downconverter is a multifunction RF front end designed for the
high dynamic range cellular communications standards. The design of the TQ9203
provides a 2.5dB system noise figure for excellent sensitivity, and a good signal
range with 10dBm ...
The TQ9222 is a 3-V, RF Receiver IC designed specifically for dual-band TDMA
applications. Its RF performance meets the requirements of products designed to
the IS-136 and GSM standards. The TQ9222 is pin compatible with TQ5121 (cellular
band LNA/Mixer) ...
The TQ9223C 3V RFIC Downconverter is a RF Receiver IC front end designed for the
high dynamic range cellular communications standards. The TQ9223C provides a
2.8dB system noise figure for excellent sensitivity, and a good signal range with
-11dB input IP3. ...
FM Reception Circuit for Battery Supply TDA7088 The UTC TDA7088 is a bipolar integrated circuit for use in
mono portable and pocket radios. It is used when a minimum
of peripheral components (of small dimensions and low
costs) is important. The ...
The UTC TA31142 is a low power IF receiver IC
and is suitable for use as the second IF
downconverter in double-conversion paging systems.
It is well-suited for POCSAG paging applications and
incorporates a 2-level FSK demodulator consisting of
a ...
The SM9501A is a BiCMOS RCC*1 receiver IC. It accepts low frequency standard wave input received from
an external antenna, amplies it, detects the data signal, and outputs a digital time code signal. ...
The TEA5591 is an integrated radio circuit which is designed for use in portable receivers and clock radios. The IC is
also applicable to mains-fed AM an AM/FM receivers and car radio-receivers. The main advantage of this IC is its ability
to operate over a ...
The PB1009K is a silicon monolithic IC developed for GPS receivers. This IC integrates a full VCO, second IF
filter, 4-bit ADC, and digital control interface to reduce cost and mounting space. In addition, its power consumption
is low.
Moreover, use of ...
The ML6190B receives and detects standard low-frequency radio waves and outputs time codes indicating time
and calendar information as digital signals. Using the time codes allows clocks built in various devices to be
corrected automatically. The ML6190B ...
The RF2722 is a highly-integrated receiver IC supporting GSM, GPRS, and EDGE
cellular standards in the GSM850, EGSM, DCS, and PCS bands. The RF2722 sup-
ports both very-low intermediate frequency (VLIF) as well as direct conversion
receive (DCR) ...