The ADG901/ADG902 are wideband switches using a CMOS Process to provide high isolation and low insertion loss to 1GHZ. The ADG901 is an absorptive switch having 50 ohm terminated shunt legs, while the ADG902 is a reflective switch. ...
The ADG901/ADG902 are wideband switches using a CMOS Process to provide high isolation and low insertion loss to 1GHZ. The ADG901 is an absorptive switch having 50 ohm terminated shunt legs, while the ADG902 is a reflective switch. ...
The ADG918/ADG919 are wideband switches using a CMOS Process to provide high isolation and low insertion loss to 1GHZ. The ADG918 is an absorptive switch having 50 ohm terminated shunt legs, while the ADG919 is a reflective switch. ...
The ADG918/ADG919 are wideband switches using a CMOS Process to provide high isolation and low insertion loss to 1GHZ. The ADG918 is an absorptive switch having 50 ohm terminated shunt legs, while the ADG919 is a reflective switch. ...
The ADG936/ADG936-R are wideband analog switches that comprise two independently selectable SPDT switches using a CMOS process to provide high isolation and low insertion loss to 1 GHz. The ADG936 is an absorptive/matched dual SPDT with 50 terminated shunt ...
BF1108; BF1108R Silicon RF Switches These switches are a combination of a depletion type
field-effect transistor and a bandswitching diode in an
SOT143B (BF1108) or SOT143R (BF1108R) package.
The low loss and high isolation capabilities of these
devices ...
The MAX4545/MAX4546/MAX4547 are low-voltage T-switches designed for switching RF and video signals from DC to 300MHz in 50 and 75 system
643
s. The MAX4545 contains four normally open single-pole/single-throw (SPST) switches. The MAX4546 contains two dual ...
The MAX4545/MAX4546/MAX4547 are low-voltage T-switches designed for switching RF and video signals from DC to 300MHz in 50 and 75 system
643
s. The MAX4545 contains four normally open single-pole/single-throw (SPST) switches. The MAX4546 contains two dual ...
The MAX4545/MAX4546/MAX4547 are low-voltage T-switches designed for switching RF and video signals from DC to 300MHz in 50 and 75 system
643
s. The MAX4545 contains four normally open single-pole/single-throw (SPST) switches. The MAX4546 contains two dual ...
The MAX4565/MAX4566/MAX4567 are low-voltage T-switches designed for switching RF and video signals from DC to 350MHz in 50 and 75 system
643
s. The MAX4565 contains four normally open single-pole/single-throw (SPST) switches. The MAX4566 contains two dual ...
The MAX4565/MAX4566/MAX4567 are low-voltage T-switches designed for switching RF and video signals from DC to 350MHz in 50 and 75 system
643
s. The MAX4565 contains four normally open single-pole/single-throw (SPST) switches. The MAX4566 contains two dual ...
The MAX4565/MAX4566/MAX4567 are low-voltage T-switches designed for switching RF and video signals from DC to 350MHz in 50 and 75 system
643
s. The MAX4565 contains four normally open single-pole/single-throw (SPST) switches. The MAX4566 contains two dual ...
The MAX4529 is a low-voltage T-switch designed for switching RF and video signals from DC to 300MHz in 50 and 75 systems. This switch is constructed in a \"T\" configuration, ensuring excellent high-frequency off isolation of -80dB at 10MHz. The MAX4529 ...
The HMC174MS8(HMC174MS8E) is a low-cost SPDT switches in 8-lead MSOP packages for use in transmit-receive applications which require very low distortion at high signal power levels. The device can control signals from DC to 3 GHz and is especially suited for ...
The HMC182S14(HMC182S14E) is a low-cost terminated SP4T switch in 14-lead SOIC package for use in antenna diversity, switched filter banks, gain/ attenuation selection, and general channel multiplexing applications. The switch can control signals up to 2 GHz. ...
The HMC183QS24(HMC183QS24E) is a low-cost non-reflective SP8T switch in a 24-lead QSOP package for use in antenna diversity, switched filter banks, gain/attenuation selection, and general channel multiplexing applications. A 3:8 decoder is integrated on the ...
The HMC190MS8(HMC190MS8E) is a low cost SPDT switch in an 8-lead MSOP package. The switch can control signals from DC to 3 GHz. It is especially suited for low and medium power applications using positive control voltages. The two control voltages require a ...
The HMC194MS8(HMC194MS8E) is a low-cost SPDT switch in an 8-lead MSOP packag for use in applications which require high isolation between two RF paths. The devices can control signals from DC to 3 GHz and have been optimized to provide extremely high ...
The HMC197(HMC197E) is a low-cost SPDT switch in a 6-lead SOT26 plastic package for use in general switching applications which require very low insertion loss and very small size. The device can control signals from DC to 3.0 GHz and is especially suited for ...
The HMC199MS8(HMC199MS8E) is a low-cost general purpose dual SPDT GaAs bypass switch in an 8-lead MSOP package covering DC to 2.5 GHz. These four-RF- port components integrate two SPDT switches and a through line onto a single IC. The designs provide low ...
The HMC221(HMC221E) is a low-cost SPDT switch in a 6-lead SOT26 plastic package for use in general switching applications which require very low insertion loss and very small size. These devices can control signals from DC to 3 GHz and is especially suited ...
The HMC224MS8(HMC224MS8E) is a low-cost SPDT switch in an 8-lead MSOP package for use in transmit-receive applications. The device can control signals from 5 to 6 GHz and is especially suited for 5.2 GHz UNII and 5.8 GHz ISM applications with only 1.2 dB loss. ...
The HMC226(HMC226E) is a low-cost SPDT switch in a 6-lead SOT26 package for use in transmit-receive applications which require very low distortion at high signal power levels. The device can control signals from DC to 2 GHz and is especially suited for 450 ...
The HMC231G7 is a broadband high isolation non- reflective GaAs MESFET SPST switch in a hermetic surface mount package. Covering DC to 6 GHz, the switch features >55 dB isolation up to 2 GHz and >42 dB isolation up to 6 GHz. The switch operates using ...
The HMC232 is a broadband non-reflective GaAs MESFET SPDT MMIC chip. Covering DC to 15 GHz, the switch features over 55 dB isolation at lower frequencies and over 45 dB at higher frequencies due to the implementation of on-chip via hole structures. The switch ...
The HMC232C8 is a broadband high isolation non-reflective GaAs MESFET SPDT switch in a non-hermetic surface mount ceramic package. Covering DC to 8 GHz, the switch features >55 dB isolation up to 2 GHz and >42 dB isolation up to 8 GHz. The switch operates ...
The HMC232G7 is a broadband high isolation non- reflective GaAs MESFET SPDT switch in a hermetic surface mount package. Covering DC to 6 GHz, the switch features >55 dB isolation up to 2 GHz and >42 dB isolation up to 6 GHz. The switch operates using ...
The HMC232G8 is a broadband high isolation non- reflective GaAs MESFET SPDT switch in a hermetic surface mount package. Covering DC to 6 GHz, the switch features >48 dB isolation up to 2 GHz and >34 dB isolation up to 6 GHz. The switch operates using ...
The HMC232LP4(HMC232LP4E) is a broadband high isolation non-reflective GaAs MESFET SPDT switch in low cost leadless QFN surface mount plastic pack- age. Covering DC to 12 GHz, the switch features >60 dB isolation up to 3 GHz and >42 dB isolation up to 12 GHz. ...
The HMC233G8 is a broadband high isolation non- reflective GaAs MESFET SPDT switch in a hermetic surface mount package. Covering DC to 6 GHz, the switch features >44 dB isolation up to 2 GHz and >31 dB isolation up to 6 GHz. The switch operates using ...
The HMC234C8 is a broadband high isolation non- reflective GaAs MESFET SPDT switch in a non- hermetic surface mount ceramic package. Covering DC to 8 GHz, the switch features >52 dB isolation up to 2 GHz and >38 dB isolation up to 8 GHz. The switch operates ...
The HMC239S8(HMC239S8E) is a low-cost GaAs MMIC SPDT switch in an 8-lead SOIC package. The switch can control signals from DC to 2.5 GHz. It is especially suited for low or medium power applications which require extremely fast switching with minimal ...
The HMC240 is a low cost GaAs MESFET SPDT switch chip. Covering DC to 4 GHz, this switch offers high isolation and low insertion loss. RF1 and RF2 are reflective shorts when off. The switch can operate using either two negative control logic in- puts of -5/0V ...
The HMC241LP3(HMC241LP3E) is a general purpose non-reflective SP4T switch in a low cost lead-less surface mount package. Covering DC - 4 GHz, this switch offers high isolation and has a low insertion loss of 0.7 dB at 2 GHz. The switch offers a single positive ...
The HMC241QS16(HMC241QS16E) is a general purpose low-cost non-reflective SP4T switch in 16-lead QSOP package. Covering DC - 3.5 GHz, this switch offers high isolation and has a low insertion loss of 0.5 dB at 2 GHz. The switch offers a single positive bias ...
The HMC244G16 is a non-reflective SP4T switch in a 16 lead glass/metal (hermetic) package. Covering DC to 4 GHz, the switch offers 30~50 dB isolation and a low insertion loss of 0.7 dB through 3 GHz. A 2:4 TTL/CMOS compatable decoder is integrated on the ...
The HMC245QS16(HMC245QS16E) is a low cost non-reflective SP3T switch in 16-lead QSOP surface mount packages. Covering DC to 3.5 GHz, the switch offers 30 to 40 dB isolation and a low insertion loss of 0.5 dB. A 2:3 TTL/CMOS compatible decoder is integrated ...
The HMC252QS24(HMC252QS24E) is a low-cost non-reflective SP6T switch in 24-lead QSOP package featuring wideband operation from DC to 3 GHz. The switch offers a single positive bias and true TTL/CMOS compatibility. A 3:6 decoder is integrated on the switch ...
The HMC253LC4 is a non-reflective SP8T switch in a leadless RoHS compliant 4x4 mm ceramic SMT package featuring wideband operation from DC to 3.5 GHz. The switch offers a single positive bias and true TTL/CMOS compatibility enabling it to operate with 0/+3V ...
The HMC253QS24(HMC253QS24E) is a low-cost non-reflective SP8T switches in 24-lead QSOP packages featuring wideband operation from DC to 2.5 GHz. The switch offers a single positive bias and true TTL/CMOS compatibility. A 3:8 decoder is integrated on the switch ...
The HMC270MS8G(HMC270MS8GE) is a broadband non-reflective GaAs SPDT switch in an 8 lead MSOP grounded base surface mount plastic package. Covering DC to 8 GHz, the switch offers excellent isolation from 70 to 35 dB. The negative control voltage of -5 volts ...
The HMC276LP4(HMC276LP4E) is a low-cost 4x2 switch matrix in leadless QFN 4x4 mm surface mount package for use in RF multiplexing applications from 200 to 3000 MHz. A positive voltage con- trolled 4 bit decoder is integrated on the switch. The switches may be ...
The HMC276QS24(HMC276QS24E) is a low-cost 4x2 switch matrix in a 24-lead QSOP package for use in RF multiplexing applications from 700 to 3000 MHz. A positive voltage controlled 4 bit decoder is integrated on the switch. The switch may be used in either 75 ...
The HMC284MS8(HMC284MS8GE) is a low-cost SPDT switch in an 8-lead grounded base MSOP package. The design has been optimized to provide high isolation with minimal insertion loss for medium and low power applications. On-chip circuitry allows positive voltage ...
The HMC321LP4(HMC321LP4E) is a broadband non- reflective GaAs MESFET SP8T switch in low cost leadless surface mount package. Covering DC to 8 GHz, this switch offers high isolation and low insertion loss. This switch also includes an on board binary decoder ...
The HMC322 is a broadband non-reflective GaAs MESFET SP8T switch chip. Covering DC to 10 GHz, this switch offers high isolation and low insertion loss and extends the frequency coverage of Hittites SP8T switch product line. This switch also includes an on ...
The HMC322LP4(HMC322LP4E) is a broadband non-reflective GaAs MESFET SP8T switch in low cost leadless surface mount package. Covering DC to 8 GHz, this switch offers high isolation and low insertion loss. This switch also includes an on board binary decoder ...
The HMC336MS8G(HMC336MS8GE) is a broad- band non-reflective GaAs MESFET SPDT switch in low cost 8 lead MSOP8G surface mount package with an exposed ground paddle. Covering DC to 6 GHz, this switch offers high isolation and low insertion loss. The switch ...
The HMC344 is a broadband non-reflective GaAs MESFET SP4T switch chip. Covering DC to 8 GHz, this switch offers high isolation and low insertion loss and extends the frequency coverage of Hittites SP4T switch product line. This switch also includes an on ...
The HMC344LC3 is a broadband non-rel ective GaAs
MESFET SP4T switch in a ceramic 3x3 mm leadless
surface mount package. Covering DC to 8 GHz, this
switch offers high isolation and low insertion loss. The
HMC344LC3 includes an integrated binary decoder ...
The HMC344LH5 is a broadband non-reflective GaAs MESFET SP4T switch in a hermetic SMT leadless package. Covering DC to 12 GHz, this switch offers high isolation and low insertion loss. This switch also includes an on board binary decoder circuit which reduces ...
The HMC344LP3(HMC344LP3E) is a broadband non-reflective GaAs MESFET SP4T switch in low cost leadless surface mount package. Covering DC to 8 GHz, this switch offers high isolation and low insertion loss and extends the frequency coverage of Hittites SP4T ...
The HMC345LP3(HMC345LP3E) is a broadband non-reflective GaAs MESFET SP4T switch in a low cost leadless surface mount package. Covering DC to 8 GHz, this switch offers high isolation and low insertion loss. This switch also includes an on board binary decoder ...
The HMC347 is a broadband non-reflective GaAs MESFET SPDT MMIC chip. Covering DC to 20 GHz, the switch offers high isolation and low insertion loss. The switch features over 50 dB isolation at lower frequencies and over 40 dB at higher frequencies due to ...
The HMC347G8 is a broadband high isolation non- reflective GaAs MESFET SPDT switch in a 8 lead glass/metal (hermetic) surface mount package. Covering DC to 8.0 GHz, the switch features >42 dB isolation up to 2 GHz and >25 dB isolation up to 8.0 GHz. The switch ...
The HMC347G8 is a broadband high isolation non-reflective GaAs MESFET SPDT switch in a 8 lead glass/metal (hermetic) surface mount package. Covering DC to 8.0 GHz, the switch features >42 dB isolation up to 2 GHz and >25 dB isolation up to 8 GHz. The switch ...
The HMC347LP3(HMC347LP3E) is a broadband high isolation non-reflective GaAs MESFET SPDT switch in a low cost leadless QFN surface mount plastic package. Covering DC to 14 GHz, the switch offers high isolation and low insertion loss. The switch features >50 dB ...
The HMC348LP3(HMC348LP3E) is a non-reflective GaAs MESFET SPDT switch in low cost leadless QFN surface mount plastic package ideal for CATV applications. Covering DC to 2.5 GHz, the switch offers high isolation, low insertion loss, integrated 75 Ohm ...
The HMC349LP4C(HMC349LP4CE) is a high isolation non-reflective DC to 4 GHz GaAs MESFET SPDT switch in a low cost leadless surface mount package. The switch is ideal for cellular/PCS/ 3G basestation applications yielding 60 to 65 dB isolation, low 0.9 dB ...
The HMC349MS8G(HMC349MS8GE) is a high isolation non-reflective DC to 4 GHz GaAs MESFET SPDT switch in low cost 8 lead MSOP8G surface mount package with exposed ground paddles. The switch is ideal for cellular/PCS/3G basestation applications yielding 50 to 60 ...
The HMC393MS8G(HMC393MS8GE) is a low cost C-band DPDT switch that operates between 5 and 6 GHz. This switch can operate as an integrated antenna diversity and transmit/receive switch for the HyperLAN and UNII radio platforms. The design provides 20 dB of ...
The HMC427LP3 & HMC427LP3E are low loss
broadband positive control transfer switches in
leadless surface mount packages. Covering DC to 8
GHz, this switch offers high isolation and low insertion
loss. The switch operates using a positive control ...
The HMC435MS8G & HMC435MS8GE are non-
rel ective DC to 4 GHz GaAs MESFET SPDT switches
in low cost 8 lead MSOP8G surface mount packages
with exposed ground paddles. The switch is ideal
for cellular/PCS/3G basestation applications yielding
50 to 60 dB ...
The HMC436MS8G & HMC436MS8GE are low cost
C-band DPDT switches that operate between 4.9
and 5.9 GHz. This switch can operate as an inte-
grated antenna diversity and transmit/receive switch
for the 802.11a/HiperLAN and UNII radio platforms.
The switch ...
The HMC446 & HMC446E are low-cost SPDT swit-
ches in 6-lead SOT26 packages for use in transmit-
receive applications which require very low distortion
a t h i g h s i g n a l p o w e r l e v e l s , u p t o 1 0 w a t t s . T h e
device can ...
The HMC484MS8G(HMC484MS8GE) is a low- cost SPDT switch in an 8-lead MSOPG package for use in transmit-receive applications which require very low distortion at high input signal power levels, through 10 watts (+40 dBm). The device can control signals from ...
The HMC536LP2(HMC536LP2E) is a DC to 6 GHz GaAs MMIC T/R switch in leadless 2x2 mm DFN LP2 surface mount packages with an exposed ground paddle. The switch is ideal for cellular, WiMAX, & WiBro access point and subscriber applications featuring low 0.6 ...
The HMC536MS8G(HMC536MS8GE) is a DC to 6 GHz GaAs MMIC T/R switch in an 8 lead MSOP8G surface mount package with an exposed ground paddle. The switch is ideal for cellular/PCS/3G basestation applications featuring low 0.5 dB insertion loss and +55 dBm ...
The HMC544(HMC544E) is a low cost SPDT switch in 6-lead SOT26 package for use in transmit-receive applications which require very low insertion loss at medium power levels. These devices can control signals from DC to 4.0 GHz and are especially suited ...
The HMC545(HMC545E) is a low-cost SPDT switch in 6-lead SOT26 plastic package for use in general switching applications which require very low insertion loss and very small size. With 0.25 dB typical loss, these devices can control signals from DC to 3.0 ...
The HMC546LP2(HMC546LP2E) is a failsafe SPDT switch in a leadless DFN surface mount plastic package for use in transmit-receive, and LNA protection applications which require very low distortion and high power handling of up to 10 watts. The device can ...
The HMC546MS8G(HMC546MS8GE) is a low-cost SPDT switch in 8-lead MSOP8G surface mount package for use in transmit-receive applications which require very low distortion at high signal power levels, up to 10 watts. The device can control signals from 200 - ...
The HMC547LP3(HMC547LP3E) is a general purpose broadband high isolation non-reflective GaAs MESFET SPDT switch in low cost leadless QFN surface mount plastic package. Covering DC to 20 GHz, the switch offers high isolation and low insertion loss. The ...
The HMC550 and HMC550E are low-cost SPST Failsafe switches in 6-lead SOT26 plastic packages for use in switching applications which require low insertion loss and very low current consumption. With 0.7 dB typical loss, these devices can control signals ...
The HMC574MS8(HMC574MS8E) is a low-cost SPDT switch in an 8-lead MSOP package for use in transmit/receive applications which require very low distortion at high incident power levels. The device can control signals from DC to 3 GHz and is especially ...
The HMC595(HMC595E) is a low-cost SPDT switch in a 6-lead SOT26 package for use in transmit/receive applications which require very low distortion at high incident power levels. The device can control signals from DC to 3 GHz and is especially suited for ...
The HMC596LP4(HMC596LP4E) is a low-cost 4x2 switch matrix in a leadless QFN 4x4 mm surface mount package for use in Satellite / DBS, LNBs and multiswitches from 200 to 3000 MHz. A positive voltage controlled 4 bit decoder is integrated on the switch. The ...
The HMC607 is a broadband high isoaltion non-reflective GaAs MESFET SPDT MMIC chip. Covering DC to 15 GHz, the switch features >55 dB isolation at lower frequ-encies and >45 dB at higher frequencies. The switch operates using complementary negative control ...
The HMC607 is a broadband high isoaltion non-reflective GaAs MESFET SPDT switch in a hermetic surface mount package. Covering DC to 6 GHz, the switch features >55 dB isolation up to 2 GHz and >42 dB isolation up to 6 GHz. The switch operates using ...
The HMC641 is a broadband non-reflective GaAs PHEMT SP4T switch chip. Covering DC to 18 GHz, this switch offers high isolation and low insertion loss and extends the frequency coverage of Hittites SP4T switch product line. This switch also includes an on board ...
The HMC646LP2(HMC646LP2E) is an SPDT switch in a leadless DFN surface mount plastic package for use in transmit / receive and LNA protection applications which require very low distortion and high power handling of up to 40 watts with less than 10% duty cycle. ...
The HMC-C011 is a general purpose broadband high isolation non-reflective GaAs MESFET SPDT switch housed in a miniature hermetic module with field replaceable SMA connectors. Covering DC to 20 GHz, the switch offers high isolation and low insertion loss. The ...
The HMC-C019 is a high speed, high isolation GaAs MESFET SPST switch housed in a miniature hermetic module with field replaceable SMA connectors. Covering DC to 20 GHz, the switch features 100 dB isolation up to 4 GHz and 65 dB isolation up to 20 GHz. CMOS ...
BGS12 SPDT RF Switch ,The BGS12A General Purpose RF MOS switch is designed to cover a broad range of applications from 0.1 to
3 GHz. The symmetric design of its single pole double throw configuration, as shown in Figure 1 offers high design
flexibility. ...
The AWS5523 is a single pole, three terminal (SP3T) RF switch developed to meet the stringent requirements of GSM systems. Manufactured in ANADIGICS\' state-of-the-art pHEMT process, the device uses patent-pending circuit topologies to provide the low ...
The AWS5532 is a single pole, double throw (SPDT) RF switch developed for applications requiring very low distortion at high input drive levels. Manufactured in ANADIGICS\' state-of-the-art pHEMT process, the device uses patented circuit topologies to provide ...
The AWS5534 is a single pole, three throw (SP3T) RF switch developed for CCDMA applications; specifically, highly symmetric single-tone desensitivity performance. Manufactured in ANADIGICS\' state-of-the-art pHEMT process, the device uses patented circuit ...
The uPD5713TK is a CMOS MMIC for wide band SPDT (Single Pole Double Throw) switch which were developed
for mobile communications, wireless communications and another general-purpose RF switching application.
This device can operate frequency from 0.05 to ...
The uPG2158T5K is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed
for mobile phone and another L, S-band application. ...
The uPG2155TB is an L-band SPDT GaAs FET switch which was developed for digital cellular or cordless
telephone application. The device can operate from 500 MHz to 2.5 GHz, having the low insertion loss and high
linearity. ...
The uPG2156TB is an L-band single control SPDT GaAs FET switch which was developed for digital cellular or
cordless telephone application. The device can operate from 800 MHz to 2.5 GHz, having the low insertion loss and
high linearity. ...
The uPG2151TK is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed for
mobile phone and another L, S-band application. ...
The uPG2163T5N is GaAs MMIC SPDT (Single Pole Double Throw) switch which was developed for 2.4 GHz and
6 GHz dual-band wireless LAN. This device can operate frequency from 2.4 GHz band and 6 GHz band, having the
low insertion loss and high isolation. ...
The uPG2162T5N is a GaAs MMIC DPDT (Double Pole Double Throw) switch which was developed for 2.4 GHz
and 6 GHz dual-band wireless LAN. This device can operate frequency from 2.4 GHz band and 6 GHz band, having
the low insertion loss and high isolation. ...
The uPG2160T5K is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed
for mobile phone and another L, S-band applications. ...
The uPG2164T5N is a GaAs MMIC DPDT (Double Pole Double Throw) switch which was developed for 2.4 GHz
and 6 GHz dual-band wireless LAN. This device can operate frequency from 2.4 GHz band and 6 GHz band, having
the low insertion loss and high isolation. ...
The uPG2157T5F is a GaAs MMIC 50 ,termination type high power SPDT (Single Pole Double Throw) switch
which was developed for WiMAX. This device can operate frequency from 2.3 to 5.85 GHz, having the low insertion
loss and high isolation. ...
The uPG2150T5L is a GaAs MMIC SP3T switch which was developed for Bluetooth and wireless LAN.
This device can operate frequency from 0.5 to 2.5 GHz, having the low insertion loss and high isolation. ...
