Dual CMOS System–RESET IC

The RNA52A10MM incorporates two reset circuits, one with and one without a delay function, allowing the generation of separate reset signals for a Microprocessor and associated system circuits. The detection voltage of each reset circuit is determined by the value of an external resistor, and the internal reference voltage is 1.0 V. The CMOS process for the RNA52A10MM means that the device draws only 1.1 (typ.). The reset cancellation delay time is set with a high degree of accuracy by the values of a capacitor and resistor connected with the CD pin. The MR (manual reset) input pin is provided for the reset circuit with the delay function, and the reset signal is output in response to a high level on the MR input pin. The MR pin is pulled down by a 2-M, internal resistor. Output pins Vo1 and Vo2 are open drain. By Renesas Technology
RNA52A10MM 's PackagesRNA52A10MM 's pdf datasheet



RNA52A10MM Pinout, Pinouts
RNA52A10MM pinout,Pin out
This is one package pinout of RNA52A10MM,If you need more pinouts please download RNA52A10MM's pdf datasheet.

RNA52A10MM circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

RNA52A10MM Pb-Free RNA52A10MM Cross Reference RNA52A10MM Schematic RNA52A10MM Distributor
RNA52A10MM Application Notes RNA52A10MM RoHS RNA52A10MM Circuits RNA52A10MM footprint