The TEA0675 is a bipolar integrated circuit that provides two channels of Dolby B noise reduction for playback applications in car radios. It includes head and equalization amplifiers with electronically switchable time constants. Furthermore it includes ...
The TEA5760UK is a single chip electronically tuned FM stereo Radio for low voltage
applications with fully integrated Intermediate Frequency (IF) selectivity and
demodulation.
The Radio is completely adjustment free and only requires a minimum of small and ...
The TEA5761UK is a single-chip electronically tuned FM stereo Radio for low-voltage applications with fully integrated IF selectivity and demodulation.The Radio is completely adjustment free and only requires a minimum of small and low cost external ...
The TEA5762 is a 44-pin integrated AM-radio and FM-IF and demodulator part including a novel tuning concept. The Radio part is based on the TEA5712.It is designed for the use with an external FM front-end.The new tuning concept combines the advantages of hand ...
The TEA5764HN is a single chip electronically tuned FM stereo Radio with Radio Data
System (RDS) and Radio Broadcast Data System (RBDS) demodulator and RDS/RBDS
decoder for portable application with fully integrated IF selectivity and demodulation.
The ...
The TEA5764UK is a single chip electronically tuned FM stereo Radio with Radio Data
System (RDS) and Radio Broadcast Data System (RBDS) demodulator and RDS/RBDS
decoder for portable application with fully integrated IF selectivity and demodulation.
The ...
The TEA5766UK is a single chip electronically tuned FM stereo Radio with Radio Data
System (RDS) and Radio Broadcast Data System (RBDS) demodulator and RDS/RBDS
decoder, for portable application with fully integrated Intermediate Frequency (IF)
selectivity ...
The TEA5767HN is a single-chip electronically tuned FM stereo Radio for low-voltage
applications with fully integrated Intermediate Frequency (IF) selectivity and
demodulation. The Radio is completely adjustment-free and only requires a minimum of
small and ...
The TEA5768HL is a single-chip electronically tuned FM
stereo Radio for low-voltage applications with fully
integrated IF selectivity and demodulation. The Radio is
completely adjustment-free and only requires a minimum
of small and low cost external ...
The TEA6848H is a single IC with car Radio tuner for AM,
FM and Weather Band (WB) intended for microcontroller
tuning with the I2C-bus. It provides the following functions:
AM double conversion receiver for LW, MW and SW
(31 m, 41 m and 49 m bands) with ...
The TEF6700HL is a single chip car Radio tuner for AM, FM standard, FM IBOC DAB and weather band providing gain controlled output of FM IF and AM IF2 for a car IF DSP IC (e.g. SAA7724H) including the following functions:AM double conversion tuner for LW/MW/SW ...
The TEF6701HL is a single chip car Radio tuner for AM, FM standard, FM In-Band
On-Channel Digital Audio Broadcast (IBOC DAB) and weather band providing gain
controlled output of FM IF and AM IF2 for a car IF DSP IC (e.g. SAA7724H) including the
following ...
The TEF6721HL is a single chip car Radio tuner for AM, FM standard, FM In-Band
On-Channel Digital Audio Broadcast (IBOC DAB) and weather band providing combined
AM and FM gain controlled differential Intermediate Frequency (IF) output for the
SAF7730H ...
The TEF6890H is a monolithic BiMOS integrated circuit
comprising the stereo decoder function, weak signal
processing and ignition noise blanking facility for AM and
FM combined with input selector and tone/volume control
for AM and FM car radio ...
The TEF6892H is a monolithic BiMOS integrated circuit
comprising the stereo decoder function, weak signal
processing and ignition noise blanking facility for AM and
FM combined with input selector and tone/volume control
for AM and FM car radio ...
The TEF6894H is a monolithic BiMOS integrated circuit
comprising the stereo decoder function, weak signal
processing and ignition noise blanking facility for AM and
FM combined with input selector and tone/volume control
for AM and FM car radio ...
The TDA1596 provides IF amplification, symmetrical quadrature demodulation and level detection for quality home and
car FM Radio receivers and is suitable for both mono and stereo reception. It may also be applied to common front-ends,
stereo decoders and AM ...
The TDA1599 provides IF amplification, symmetrical
quadrature demodulation and level detection for quality
home and car FM Radio receivers and is suitable for mono
and stereo reception. It may also be applied to common
front ends, stereo decoders and AM ...
The TDA7010T is a monolithic integrated circuit for mono FM portable radios, where a minimum on peripheral components is important (small dimensions and low costs). The IC has an FLL (Frequency-Locked-Loop) system with an intermediate frequency of 70 kHz. The ...
The TEA5570 is a monolithic integrated Radio circuit for use in portable receivers and clock radios. The IC is also
applicable to mains-fed AM and AM/FM receivers and car radio-receivers. Apart from the AM/FM switch function the IC
incorporates for AM a ...
The L4943 contains a triple voltage regulator and
a high side driver.
In stand-by the output is active as long as possi-
ble even when in thermal shutdown or under any
other fault conditions. ...
The ASPM (Audio System Power Module) is an
integration of three high side drivers and five
regulators developed to provide the power for an
audio system.
2
The outputs of the IC are controlled via the I C
bus and the Enable input.
External protection ...
The TDA2005 is class B dual audio power amplifier
in MULTIWATT, package specifically designed for
car Radio application : power booster amplifiers
are easily designed using this device that provides
a high current capability (up to 3.5 A) and that ...
The TDA7240A is a 20W bridge audio amplifier IC
designed specially for car Radio applications.
Thanks to the low external part count and compact
Heptawatt 7-pin power package the TDA7240A
occupies little space on the printed circuit board. ...
The TDA7540 is a high performance tuner circuit
for AM/FM car Radio It contains mixer, IF
amplifier, demodulator for AM and FM,
stereodecoder, quality detection, ISS filter and
PLL synthesizer with IF counter on a single chip.
Use of BICMOS ...
The TDA7540N is a high performance tuner
circuit for AM/FM car Radio It contains mixer, IF
amplifier, demodulator for AM and FM,
stereodecoder, quality detection, ISS filter and
PLL synthesizer with IF counter on a single chip.
Use of BICMOS ...
The TDA7541 is a high performance tuner circuit
with stereo decoder for AM/FM car Radio It
contains a mixer, IF amplifier, demodulator for AM
and FM, stereo decoder, quality detection, ISS
filter and PLL synthesizer with IF counter on a
single chip. ...
The TDA7511 is a high performance tuner circuit for
AM/FM car Radio It contains mixers, IF amplifiers, de-
modulators for AM and FM, quality detection, ISS fil-
ter and PLL synthesizer with IF counter on a single
chip. ...
The TDA7512 is a high performance tuner circuit for
AM/FM car Radio It contains mixer, IF amplifier, de-
modulator for AM and FM, quality detection, ISS filter
and PLL synthesizer with IF counter on a single chip.
Use of BICMOS technology allows the ...
The ATR2740 is a fully integrated processing unit which covers all DAB- (Eureka 147,
ETS 300 401) related digital tasks like DAB OFDM demodulation and decoding, audio source
decoding, data decoding, as well as time and frequency synchronization. ...
The ATR4256 is a synthesizer IC for FM receivers and an AM up-conversion system
in BiCMOS technology. Together with the AM/FM IC ATR4258 or ATR4255, it com-
prises a complete AM/FM car Radio front-end, which is also recommended for RDS
(Radio Data System) ...
The ATR4255P is a highly integrated AM/FM front-end circuit manufactured using
Atmels advanced BiCMOS technology. It represents a complete, automatically
adjustable AM/FM front end, containing a double-conversion system for FM and an
up/down-conversion ...
The ATR2733 is a front-end monolithic integrated circuit, manufactured using Atmel
silicon-germanium BiCMOS process (SiGMOS).
The ATR2733 carries out all functions of RF and IF processing, as well as the
clock-signal generation for these functions. ...
The ATR2732 is a front-end monolithic integrated circuit, manufactured using
,
Atmel s silicon-germanium BiCMOS process (SiGMOS)
The ATR2732 carries out all functions of RF and IF processing, as well as the
clock-signal generation for these functions. ...
The ATR2732M1 is a front-end monolithic integrated circuit, manufactured using
,
Atmel s silicon-germanium BiCMOS process (SiGMOS)
The ATR2732M1 carries out all functions of RF and IF processing, as well as the
clock-signal generation for these functions. ...
The ATR4262 is a single-chip AM/FM and weather band tuner dedicated for digital IF
,
solutions in car-radio applications. ATR4262 is produced using Atmel s advance
BICMOS2S technology and fulfills the automotive requirements. This part is suitable
for IBOC ...
The ATA3741 is a multi-chip PLL receiver device supplied in an SO20 package. It has
been specially developed for the demands of RF low-cost data transmission systems
with low data rates from 1 kBaud to 10 kBaud (1 kBaud to 3.2 kBaud for FSK) in
Manchester ...
The ATA3742 is a multi-chip PLL receiver device supplied in an SO20 package. It has
been specially developed for the demands of RF low-cost data transmission systems
with data rates from 1 kBaud to 10 kBaud (1 kBaud to 3.2 kBaud for FSK) in
,
Manchester or ...
The ATA3745 is a multi-chip PLL receiver device supplied in an SO20 package. It has
been specially developed for the demands of RF low-cost data transmission systems
with low data rates from 1 kBaud to 10 kBaud in Manchester or Bi-phase code. The
receiver ...
The ATA5760/ATA5761 is a multi-chip PLL receiver device supplied in an SO20 pack-
age. It has been especially developed for the demands of RF low-cost data
transmission systems with data rates from 1 kBaud to 10 kBaud in Manchester or
Bi-phase code. The ...
The ATA5744 is a PLL receiver device for the receiving range of f = 300 MHz to
0
450 MHz. It is developed for the demands of RF low-cost data communication sys-
tems with low data rates and fits for most types of modulation schemes including
Manchester, ...
The ATA5282 is a 125-kHz ultra low power receiver IC with three input channels for
Passive Entry Go applications. It includes all circuits for an LF wake-up channel. The
three sensitive input stages of the IC amplifier demodulate and measure the input ...
The ATA5811/ATA5812 is a highly integrated UHF ASK/FSK single-channel half-duplex trans-
ceiver with low power consumption supplied in a small QFN48 package. The receive part is built
as a fully integrated low-IF receiver, whereas direct PLL modulation with ...
The ATA5756/ATA5757 is a PLL transmitter IC which has been developed for the
demands of RF low-cost transmission systems at data rates up to 20 kBaud Manches-
ter coding and 40 kBaud NRZ coding. The transmitting frequency range is 313 MHz to
317 MHz ...
The CYWM6934 WirelessUSB LS, Radio Module offers a
complete Radio module solution for integration into existing or
new 2.4-GHz products.
The CYWM6934 is tested for functional operation and is
FCC/ETSI(EU)/Industry pre-certified. The module is ...
TA2132BPG, TA2132BFG are AM/FM Radio IC (FM F/E +
AM/FM IF) which are designed for AM/FM Radios.
FM Local Oscillation Voltage is set up low relativity, for NEW
FCC. ...
The TA2003PG, TA2003FG are AM / FM Radio IC (FM F / E+AM
/ FM IF) which are designed for AM / FM radios.
Combining with the TA7368P (Mono PW IC), a suitable AM / FM
Radio system is able to be constituted. ...
The LA1140 is an IF system IC designed for FM car stereo
receivers. It features versatile muting characteristics and allows
receiver designers to realize the muting performance according
to their design concept. Since the muting characteristics can ...
The NJM2241 is a monolithic integrated circuit in a 24-lead small outline package designed for use in 3-6V portable AM / FM Radio receivers. The functions incorporated are AM RF amplifierAM mixerFM / AM IF amplifierFM / AM detectorFM / AM tuning / indicatorAM ...
The SM9501A is a BiCMOS RCC*1 receiver IC. It accepts low frequency standard wave input received from
an external antenna, amplies it, detects the data signal, and outputs a digital time code signal. ...
ry
The SM9501B is a BiCMOS RCC*1 receiver IC. It accepts low frequency standard wave input received from
an external antenna, amplies it, detects the data signal, and outputs a digital time code signal.
*1: Radio controlled clock ...
The SA1691 is a monolithic integrated circuit designed for Radio
cassette tape recorders, clock radios and headphone radios. This IC
include all function from antenna to audio power amplifier of AM/FM
Radio ...
O
The SA1021 integrated Radio receiver circuit is for portable radios,
stereo as well as mono, where a minimum of periphery is important in
terms of small dimensions and low cost. It is fully compatible for
applications using the ...
The SA1140 is an IF system IC designed for FM car stereo receivers. It
features versatile muting characteristics which can be varied with
external parts. ...
The SA2003 is AM/FM Radio IC (FM F/E+AM/FM IF) which is
designed for AM/FM radios. Combining with the UTC7368 (Mono PW
IC), a suitable AM/FM Radio system is able to be constituted. ...
The SA2104C/SA2104CS are single-chip tuner ICs that incorporate
FM/AM and MPX circuits, which are designed for portable radios and 3V
headphone radios.
The SA2104C/SA2104CS are suitable for digital tuning system
applications. FM local ...
The SA2105 are AM/FM 1 chip tuner ICs, which are designed for
portable radios and 3V headphone radios.
This is suitable for digital tuning system applications. FM local
oscillation voltage is set up low relativity, for NEW FCC. ...
The SA2111C is AM/FM single-chip tuner IC, which is designed for
portable radios and 3V head phone radios. It is suitable for digit tuning
system, and FM local oscillation voltage is set up low relativity, for NEW
FCC. ...
The SC1088 is a bipolar integrated circuit for use in mono portable
and pocket radios. It is used when a minimum of peripheral
components (of small dimensions and low costs) is important. The
circuit contains a ...
SA9614 is a RF amplifier, used for signal conversion and auto laser
power control (ALPC) between the CD optical pickup head and
decoding chip.
SA9614 includes interface of CD optical diode, RF signal amplifier
and equalizer, VREF ...
SA9616 can be used for (ALPC) and signal conversion between CD
optical pickup head and decoding chip.
This IC incorporates an interface to general CD optical pickup
photodiode, RF signal amplifier and equalizer, VREF generation circuit
and ...
SA9618A can be used for ALPC and signal conversion between CD
optical pickup and decoding chip.
This IC incorporates an interconnection to general CD optical pickup
photodiode, bias voltage VREF generation circuit, RF amplifier and
ALPC ...
The SC9318-033 is a single-chip digital tuning system optimum
for portable sets such as headphone Radio etc 5-band of
FM/MW /LW/TV/SW are provided compatibly with worldwide
destinations. ...
The integrated CMOS circuit SC6579 is an RDS demodulator. It
recovers the additional inaudible RDS information which is transmitted by
FM Radio broadcasting.
The data signal RDDA and the clock signal RDCL are provided as
outputs for ...
The TX-2B/RX-2B is a pair of CMOS LSIs designed for remote
controlled car applications. The TX-2B/RX-2B has five control
keys for controlling the motions (i.e. forward, backward,
rightward, leftward and the turbo function) of the ...
The RX-3 is a CMOS LSIs designed for remote controlled car
applications. The RX-3 has only 2 keys with 3 states, i.e. forward key
for forward function, backward key for backward function, and stop
function if there is no signal. ...
The TX-5N/RX-5B are a pair of CMOS LSIs designed for remote
ontrolled car applications. They have nine control keys controlling
he motions (i.e. forward, backward, rightward, leftward, trigger 1--
igger 4 functions and the turbo ...
The TX-6B/RX-6B are a pair of CMOS LSIs designed for remote
controlled car applications. They have seven control keys controlling
the motions (i.e. forward, backward, rightward, leftward, two function
keys and the turbo function) of ...
The TX-2C/RX-2C is a pair of CMOS LSIs designed for remote
controlled car applications. The TX-2C/RX-2C has five control keys for
controlling the motions (i.e. forward, backward, rightward, leftward and
the turbo function) of the remote controlled ...
The TX-5B/RX-5B are a pair of CMOS LSIs designed for remote
controlled car applications. They have nine control keys controlling
the motions (i.e. forward, backward, rightward, leftward, trigger 1--
trigger 4 functions and the turbo ...
The RX-2D is a type of remote controller designed for toy cars, and it
adopts CMOS technology.
The RX-2D has five control keys for controlling the motions (i.e.
forward, backward, leftward, rightward and the turbo function) of the
remote ...
1-Chip AM/FM Radio Circuit CXA1191 The UTC CXA1191 is a one-chip FM/AM Radio IC designed
for radio-cassette tape recorders and headphone tape
recorders. ...
Dual Equalizer Amplifier With ALC KA22241 The UTC KA22241 is a monolithic integrated circuit,
consisting of dual equalizer amplifier with ALC, and it
is suitable for stereo Radio cassette tape recorders. ...
1 Chip AF/FM Reception Circuit KA22427 UTC KA22427 is a one-chip AM/FM Radio integrated circuit
that is suitable for portable Radio applications. It includes
AM amplifier, local OSC, AM mixer, AM/FM amplifier, AM
AGE, FM AGE circuit and also class ...
fm front-end TA7358P The UTC TA7358P is designed for a FM front-end
application, which is suitable to a portable Radio or a Radio
cassette. Comparing with conventional types, supply
voltage dependence, overload characteristics and spurious ...
1-Chip AM/FM Reception Circuit TA7613AP UTC TA7613AP is a one-chip AM/FM Radio integrated circuit that
is suitable for portable Radio applications. it includes am amplifier,
local OSC, AM mixer, AM/FM amplifier, AM age, FM age circuit
and also Class ...
The TDA7518 multichip module combines in a sin-
gle compact 144-pin package the full functionality
of a state-of-the-art car-radio AM/FM tuner (from
antenna input to processed audio output, plus EE-
PROM for setup storage) with a minimized number
of ...
The TDA7333 is a RDS/RDBS signal processor,
intended for recovering the inaudible RDS/RBDS
informations which are transmitted on most FM ra-
dio broadcasting stations. ...
The TDA7406 includes a high performance audio
processor with 7 bands equalizer and spectrum
analyzer plus a stereo decoder-noiseblanker.
The whole low frequency signal processing
necessary for state-of-the-art as well as future car
radios is therefore ...
The TDA7409 is a high performance signal proces-
sor specificall designed for car Radio applications.
The device includes a high performance audiopro-
cessor with fully integrated audio filters. The digital
control allows a programming in a wide range of ...
Signal Processor For Car Radio Applications,TDA7410ND is a signal processor specifically
designed for car Radio applications. The device
includes a complete audioprocessor and a stereo
decoder with noiseblanker, stereoblend and all
signal processing ...
The TDA7417 is an high performance signal
processor specifically designed for car Radio
applications with fully integrated audio filters.
The digital control allows a full programming of
the audioprocessor in a wide range of filter ...
The TDA7519 multichip module combines in a
single compact (10x10mm) 44-pin package, the
signal processing functionalities of a state-of-the-
art car Radio with a minimized number of required
external components.
Two devices are included: TDA7460N, and ...
This document gives an overview of the receiver chain of the AT86RF211S and its
associated embedded features:
Discriminator: Demodulation of the RF signal (principle, measurement/tuning of
output voltage)
Data slicer:From analog to digital world ...
The Linedriver handles all analog input- and out-
put-signals for the Digital Carradio Signal Proces-
sor TDA7501. The device contains four inde-
pendent input multiplexers to select the sources
for the DSPs four AD-converters. Four additional
gain stages ...
EQUALIZER CARRADIO SIGNAL PROCESSOR TDA7405 ,The third generation of MESH OVERLAY Power
MOSFETs for very high voltage exhibits unsur-
passed on-resistance per unit area while integrating
back-to-back Zener diodes between gate and
source. Such arrangement ...