• Product pinout
  • Description
  • UCC561,27-Line Low Voltage Differential SCSI Bias Regulator
  • The UCC561 low-voltage differential (LVD) Regulator set is designed to provide the correct references voltages and bias currents for LVD termination resistor networks (475 , 121 , and 475 ). The device also provides a 1.3-V output for "diff sense" signaling. ...
  • SG6105A,Power Supply Supervisor + Regulator + PWM
  • SG6105A controller is designed for switching-mode power supplies for desktop PCs. It provides all the functions necessary to monitor and control the output of the power supply. Remote ON/OFF control, power-good circuitry, and protection features against ...
  • LP2951,Adjustable Micro Power Voltage Regulator
  • The LP2951 is an adjustable micro power voltage Regulator suitable for use in battery-powered systems. This Regulator has various functions such as alarm which warns of a low output voltage, often due to falling batteries on the input, the external ...
  • KA78R08C,1A Fixed 8V Low Dropout Voltage Regulator (LDO)
  • The KA78RXXC is a low-dropout voltage Regulator suitable for various electronic equipments.
    It provides constant voltage power source with TO-220-4 lead full mold package. Dropout voltage of KA78RXXC is below 0.5V in full rated current (1A).
    This ...
  • FAN1589,2.7A, 1.2V Low Dropout Linear Regulator For VRM8.5
  • The FAN1589 is a low dropout three-terminal Regulator with 2.7A output current capability. This device has been optimized for VTT bus termination, where transient response and minimum input voltage are critical. The FAN1589 offers fixed 1.2V with 2.7A current ...
  • FAN1616A,0.5A Adjustable Low Dropout Linear Regulator
  • The FAN1616A and FAN1616A-1.8 ,-2.5, -3.3 and -5 are low dropout three-terminal regulators with 0.5A output current capability. These devices have been optimized for applications where transient response and minimum dropout voltage are critical. The 5V ...
  • KA78R09C,1A Fixed 9V Low Dropout Voltage Regulator (LDO)
  • The KA78RXXC is a low-dropout voltage Regulator KA78R09C suitable for various electronic equipments.
    It provides constant voltage power source with TO-220-4 lead full mold package. Dropout voltage of KA78RXXC is below 0.5V in full rated current (1A).
  • KA76L05,0.1A Fixed 5V Low Dropout Voltage Regulator (LDO)
  • KA76L05 is a fixed 3-terminal low dropout voltage Regulator KA76L05 designed to need very low quiescent current. Internally, implemented circuits include 60V load dump protection, -50V reverse transient short circuit and thermal over load protection.
  • KA78R15C,1A Fixed 15V Low Dropout Voltage Regulator (LDO)
  • The KA78RXXC is a low-dropout voltage Regulator KA78R15C suitable for various electronic equipments.
    It provides constant voltage power source with TO-220-4 lead full mold package. Dropout voltage of KA78RXXC is below 0.5V in full rated current (1A).
  • EL7536,Monolithic 1A Step-Down Regulator
  • The EL7536 is a synchronous, integrated FET 1A step-down Regulator with internal compensation. It operates with an input voltage range from 2.5V to 5.5V, which accommodates supplies of 3.3V, 5V, or a Li-Ion battery source. The output can be externally set from ...
  • TDA3617,TDA3617 Multiple Voltage Regulator
  • The TDA3617 is a multiple output voltage Regulator with three independent regulators. It contains: Three fixed voltage regulators with foldback current protection (regulators 1, 2 and 3) A supply pin that can withstand load dump pulses and negative supply ...
  • TDA3682,TDA3682 Multiple Voltage Regulator With Power Switches
  • The TDA3682 is a multiple output voltage Regulator with power switches, intended for use in car radios with or without a microprocessor. The TDA3682 contains the following: Four switchable regulators and one permanent active Regulator (BU5V) Two power ...
  • TDA3602,TDA3602 Multiple Output Voltage Regulator
  • The TDA3602 is a multiple output voltage Regulator intended for use in car radios with or without a microprocessor. It contains two fixed voltage regulators with foldback current protection (Regulators 1 and 2), and one fixed voltage Regulator that also ...
  • RH117,RH117 - Positive Adjustable Regulator
  • The RH117 is a 3-terminal positive adjustable Regulator capable of supplying up to 0.5A (H package) or 1.5A (K package). The output is adjusted using two external resistors for a range of 1.2V to 37V. The devices have full current limit thermal overload safe ...
  • RH137,RH137 - Negative Adjustable Regulator
  • The RH137 negative adjustable Regulator will deliver up to 1.5A output current over an output voltage range of 1.2V to 22V.
    Every effort has been made to make these devices easy to use and difficult to damage. Internal current and power limiting coupled ...
  • STV8131,5V AND 8V VOLTAGE REGULATOR
  • The STV8131 is a monolithic dual positive voltage Regulator designed to provide fixed precision out- put voltages of 5V and 8V at currents up to 1A. Each output can be disabled separately by a TTL input. Short circuit and thermal protections are included. ...
  • STESB01,ESBT Base Driver
  • The STESB01 is a dedicated base current biasing transistor for the Emitter-Switched Bipolar Transistor (ESBT) family of power switches. The device is able to control the ESBT storage time (from 150ns to 1.5s) using closed loop architecture. This ...
  • L9468,All Silicon Voltage Regulator
  • The L9468 is a monolithic multifunction generator Voltage Regulator intended for use in automotive applications. This device regulates the output of an automotive generator by controlling the field winding current by means of a variable frequency PWM ...
  • L9473,CAR ALTERNATOR VOLTAGE REGULATOR
  • The L9484 is a monolithic multifunction generator Voltage Regulator intended for use in automotive charging applications. This All Silicon Voltage Regulator regulates the out- put of an automotive generator by controlling the field winding current by ...
  • L9474,ALL SILICON VOLTAGE REGULATOR
  • The L9474 is a monolithic multifunction generator Voltage Regulator intended for use in automotive ap- plications. This device regulates the output of an automotive generator by controlling the field winding current by means of a variable frequency PWM ...
  • L9484,CAR ALTERNATOR VOLTAGE REGULATOR
  • The L9484 is a monolithic multifunction generator Voltage Regulator intended for use in automotive charging applications. This All Silicon Voltage Regu- lator regulates the output of an automotive generator by controlling the field winding current by means ...
  • L9407F,CAR ALTERNATOR VOLTAGE REGULATOR
  • The L9407F is a monolithic multifunction alternator voltage Regulator intended for use in automotive ap- plication. It includes the control section, the field pow- er stage, fault diagnostic circuit which drives a warning lamp, and the protection against ...
  • L585,CAR ALTERNATOR REGULATOR
  • The L585 is an integrated circuit designed for use with an NPN darlington as a voltage Regulator in a threephase alternator charging system. It includes fault diagnostic circuitry which drives a 3 W warning lamp in fault conditions such as open or short ...
  • L4925,VERY LOW DROP VOLTAGE REGULATOR
  • The L4925 is a monolithic integrated 5V voltage Regulator with a very low dropout output and additional functions such as power-on reset and programmable reset delay time. ...
  • L4938E,ADVANCED VOLTAGE REGULATOR
  • The L4938E/L4938ED/L4938EPD is a monolithic integrated dual voltage Regulator with two very low dropout outputs and additional functions as power-on re- set and input voltage sense. It is designed for supplying the microcomputer controlled ...
  • L4938N,DUAL MULTIFUNCTION VOLTAGE REGULATOR
  • The L4938N is a monolithic integrated dual voltage regulators with two very low dropout outputs and ad- ditional functions such as power-on reset and input voltage sense. They are designed for supplying mi- crocomputer controlled systems specially in ...
  • L4947PD,5V-0.5A VERY LOW DROP REGULATOR WITH RESET
  • The L4947PD is a monolithic integrated circuit in HiPSO package specially designed to provide a stabilized supply voltage for automotive and in- dustrial electronic systems. Thanks to its very low voltage drop, in automotive applications the L4947PD can ...
  • L4949,MULTIFUNCTION VERY LOW DROP VOLTAGE REGULATOR
  • The L4949E is a monolithic integrated 5V voltage Regulator with a very low dropout output and addi- tional functions as power-on reset and input volt- age sense. It is designed for supplying the micro- computer controlled systems especially in automotive ...
  • L4936E,ADVANCED VOLTAGE REGULATOR
  • The L4936E is a monolithic integrated dual volt- age Regulator with two very low dropout outputs and additional functions as power-on reset and in- put voltage sense. It is designed for supplying the microcomputer controlled systems especially ...
  • L4937N,DUAL MULTIFUNCTION VOLTAGE REGULATOR
  • The L4937N is a monolithic integrated dual voltage regulators with two very low dropout outputs and ad- ditional functions such as power-on reset and input voltage sense. It is designed for supplying micro- computer controlled systems specially in ...
  • RHFL7913,Rad-Hard Adjustable Negative Voltage Regulator
  • The RHFL7913 adjustable is a high performance Rad Hard negative voltage Regulator Available in Flat-16 and new SMD5C hermetic ceramic packages, it is specifically intended for space and harsh radiation environments. It provides exceptional ...
  • SP2996B,SP2996B -2A Regulator For DDR Bus Termination
  • The SP2996B voltage Regulator is designed to convert voltage supplies ranging from 1.6V to 6V into a desired output voltage which is adjusted by an external resistor divider. The Regulator is capable of sourcing or sinking up to 2A of Continuous current ...
  • M62230FP,LCD Matrix Regulator
  • The M62230FP is a semiconductor circuit for LCD matrix Regulator which will generate the divided-voltage to drive LCD matrix. By changing the connection of R pin (i.e., Change the internal resistor ratio), M62230FP can support divided voltage ratio ...
  • UPC37M21,TWO-OUTPUT POSITIVE VOLTAGE REGULATORS
  • The UPC37M21 series is a series Regulator with two outputs, OUTPUT1: 1 A and OUTPUT2: 0.5 A, built in a single package. OUTPUT1 outputs 3.3 V or 2.5 V, and OUTPUT2 outputs 1.8 V or 2.5 V. This series can be used to realize set miniaturization and ...
  • UPC3005,LOW-SATURATION STABILIZED POWER SUPPLY
  • The UPC3005, UPC3033 are low-saturation type regulators with an output current of 1 A at respective output voltages of 3.3 V and 5 V. These regulators are also provided with an ON/OFF function, which reduces the dissipation when there is no load, ...
  • A8286,Dual LNB Supply And Control Voltage Regulator
  • Intended for analog and digital satellite receivers, this dual low-noise block converter Regulator (LNBR) A8286 is a monolithic linear and switching voltage Regulator specifically designed to provide the power and the interface signals to two LNB down ...
  • A8292,Dual LNB Supply And Control Voltage Regulator
  • Intended for analog and digital satellite receivers, this dual low-noise block converter Regulator (LNBR) is a monolithic linear and switching voltage Regulator specifically designed to provide the power and the interface signals to two LNB down converters ...
  • UAC3092,Alternator Voltage Regulator
  • The UAC3092 is specifically designed for voltage regulation and Load Response Control (LRC) of diode rectified alternator charging systems, as commonly found in automotive applications. In maintaining system voltage, the UAC3092 monitors and compares ...
  • UAC3092A,Alternator Voltage Regulator
  • The UTC UAC3092A is designed for Load Response Control and voltage regulation of diode rectified alternator charging systems for automotive applications. ...
  • R200LD10,Voltage Regulator
  • voltage Regulator R200LD10 The UTC R200LD10 shows a high current, high accuracy, low-dropout voltage. The feature are: low dropout voltage, very low ground current. Cause the series have been designed for high current loads, so they are also used in ...
  • UR5512,2A Ddr Bus Termination Regulator
  • The UR5512 is a linear Regulator which provides up to 2 Amp bi-directional driving and sinking capability for DDR SDRAM bus terminator application. The output termination voltage tracks the reference voltage applied at VREF pin. A resistor divider ...
  • UR5515,1.5a/3a Bus Termination Regulator
  • The UTC UR5515 is a linear bus termination Regulator and designed to convert voltage supplies ranging from 1.6V~6.0V into a desired output voltage, which adjusted by two external voltage divider resistors. The device can both source and sink up to ...
  • UR5516,3a Bus Termination Regulator
  • The UTC UR5516 is designed to provide a regulated voltage with bi-directional output current for DDR-SDRAM termination. Current-limit work to limit the short-circuit current, on-chip thermal shutdown provides protection against any combination of ...
  • UR5516A,3a Bus Termination Regulator
  • The UTC UR5516A is designed to provide a regulated voltage with bi-directional output current for DDR-SDRAM termination. Current-limit work to limit the short-circuit current, on-chip thermal shutdown provides protection against any combination of ...
  • UR5516B,3a Bus Termination Regulator
  • The UTC UR5516B is a low cost linear Regulator designed to provide a desired output voltage or termination voltage for various applications by converting voltage supplies ranging from 1V to 6.0V. The desired output voltage could be programmable by two ...
  • UR5516C,3a Bus Termination Regulator
  • The UTC UR5516C is a low cost linear Regulator designed to provide a desired output voltage or termination voltage for various applications by converting voltage supplies ranging from 1V to 6.0V. The desired output voltage could be programmable by two ...
  • UR5595,Ddr Termination Regulator
  • The UTC UR5595 is a linear bus termination Regulator designed to meet JEDEC SSTL-2 and SSTL-3 (Stub Series Terminated Logic) specifications for termination of DDR-SDRAM. The device contains a high-speed operational amplifier to provide excellent ...
  • UR5596,Ddr Termination Regulator
  • The UTC UR5596 is a linear bus termination Regulator and designed to meet JEDEC SSTL-2(Stub-Series Terminated Logic) specifications for termination of DDR-SDRAM. It also can be used in SSTL-3 or HSTL (High-Speed Transceiver Logic) scheme. The device ...
  • LR478,Regulator+reset Ic
  • The UTC LR478 developed for use in CD-ROM drives, combines a 3V Regulator adapted to low power consumption with a much-sought reset function (regulator input monitoring),with internal delay circuit, set to detect 4.2V. ...
  • UC723,Adjustable Voltage Regulator
  • The UTC UC723 is a silicon monolithic integrated circuit, designed for service as voltage Regulator at output voltages, ranging from 2V to 37V at current up to 150mA. It includes a temperature-compensated reference amplifier, an error amplifier, a ...
  • CMPWR101,250mA SmartOR´┐Ż Regulator With VAUX Switch
  • The California Micro Devices SmartORTM CMPWR101 is a low dropout Regulator that delivers up to 250mA of load current at a fixed 3.3V output. An internal threshold level (typically 4.1V) is used to pre- vent the Regulator from being operated below ...
  • CM3103,400mA SmartORTM Regulator With VAUX Switch
  • The CM3103 combines a fixed voltage Regulator and a VAUX switch in a single 8-pin SOIC package. The volt- age Regulator is capable of delivering up to 400mA con- tinuously at 3.3V. The output power is provided from two independent input voltage sources on ...
  • CM3106,2.0A Source/Sink Bus Termination Regulator
  • The CM3106 is a sinking and sourcing Regulator specif- ically designed for providing power to DDR memory terminating resistors and companion chip set VTT power. The output voltage accurately tracks VDDQ/2. The CM3106 can source and sink current up to ...
  • CMPWR330,400mA SmartOR´┐Ż Dual Regulator With VAUX Switch
  • The CMPWR330 is a dual input Regulator with a fully integrated VAUX switch capable of delivering up to 400mA continuously at 3.3V. The input is taken from three independent voltage sources on a prioritized basis. Power is always taken in priority using ...
  • AMS500,LOW COST 500mA REGULATOR
  • The AMS500 series consists of positive fixed and adjustable voltage regulators ideally suited for use in battery-powered systems. These devices feature very low quiescent current of 0.8mA or less when supplying 50mA loads. This unique characteristic and ...
  • LT1020,Micropower Regulator And Comparator
  • The LT1020 is a combination micropower positive regu- lator and free collector comparator on a single monolithic chip. With only 40A supply current, the LT1020 can supply over 125mA of output current. Input voltage range is from 4.5V to 36V and dropout ...
  • IRVR101,Lin Controlled Alternator Voltage Regulator
  • The IRVR101 is an integral alternator voltage Regulator that allows for external control of the setpoint voltage in an automotive charging system where optimized alternator output control is desired. The setpoint control is achieved using the Local ...