The LT5500 is a receiver front end IC designed for low voltage operation. The chip contains a low noise amplifier (LNA), a Mixer and an LO buffer. The IC is designed to operate over a power supply voltage range from 1.8V to 5.25V. The LNA can be set to ...
The TDA7528 is a frontend module for use in car
radio receivers on the 50kHz - 108MHz and
161MHz - 163 MHz frequency bands. Its field of
use includes all the current radio broadcast
services worldwide for AM radio (long, medium
and short wave), FM ...
RF front-end for AM/FM-DSP car radios with IF sampling,The front-end TDA7515 is a high performance tuner circuit
for AM/FM - DSP car radios with 10.7MHz - IF
sampling. ...
The T7024 is a monolithic SiGe transmit/receive front-end IC with power amplifier,
low-noise amplifier and T/R switch driver. It is especially designed for operation in
,
TDMA systems like Bluetooth and WDCT. ...
The T4260 is an advanced AM/FM receiver with integrated fast PLL as a single-chip
,
solution based on Atmel s high-performance BICMOS II technology. The low-imped
ance driver at the IF output is designed for the A/D of a digital IF. The fast tuning
concept ...
The ATR4255 is a highly integrated AM/FM front-end circuit manufactured using
Atmels advanced BICMOS technology. It represents a complete, automatically adjust
able AM/FM front end, containing a double-conversion system for FM and an
up/down-conversion ...
The ATR4258 is a highly integrated AM/FM front-end circuit manufactured using
Atmels advanced BICMOS technology. It represents a complete, automatically
adjustable AM/FM front end, containing a double-conversion system for FM and an
up/down-conversion ...
The ATR2731 is a monolithically integrated Digital Audio Broadcasting one-chip front-end circuit
manufactured using Atmels advanced UHF5S tehnology. Its functionality covers a gain-con-
trolled RF amplifier with two selectable RF inputs, a gain-controlled ...
The ATR2733 is a front-end monolithic integrated circuit, manufactured using Atmel
silicon-germanium BiCMOS process (SiGMOS).
The ATR2733 carries out all functions of RF and IF processing, as well as the
clock-signal generation for these functions. ...
The ATR2732 is a front-end monolithic integrated circuit, manufactured using
,
Atmel s silicon-germanium BiCMOS process (SiGMOS)
The ATR2732 carries out all functions of RF and IF processing, as well as the
clock-signal generation for these functions. ...
The ATR4251 is an integrated low-noise AM/FM antenna amplifier with integrated
AGC in BiCMOS2S technology. The device is designed in particular for car applica-
tions, and is suitable for windshield and roof antennas. ...
The ATR2740M1 is a fully integrated processing unit which covers all DAB- (Eureka 147,
ETS 300 401) related digital tasks like DAB OFDM demodulation and decoding, audio source
decoding, data decoding, as well as time and frequency synchronization.
The ...
The ATR2732M1 is a front-end monolithic integrated circuit, manufactured using
,
Atmel s silicon-germanium BiCMOS process (SiGMOS)
The ATR2732M1 carries out all functions of RF and IF processing, as well as the
clock-signal generation for these functions. ...
The ATR4262 is a single-chip AM/FM and weather band tuner dedicated for digital IF
,
solutions in car-radio applications. ATR4262 is produced using Atmel s advance
BICMOS2S technology and fulfills the automotive requirements. This part is suitable
for IBOC ...
The ATR0981 is a monolithic IC manufactured using Atmels advanced SiGe technol
ogy. The IC performs a transmit and receive front-end function, dedicated for a
frequency range of 300 MHz to 500 MHz. It consists of a Low-Noise Amplifier (LNA)
and a Power ...
GPS RF Receiver, Single IF Architecture, 1-bit ADC, Very Low Power, Supply Switch for TCXO The ATR0603 is a single-IF GPS front-end IC, designed to meet the requirements of
mobile and automotive applications. Excellent RF performance combined with ...
The TA7371AFG is an FM front end IC designed for low voltage
operation (1.5V), which is suitable for stereo headphone radio or
radio cassette.
This IC contains RF amplifier, MIX, local oscillator and varactor
diode for AFC.
It simplifies the design ...
The TA7358APG is designed for a FM front,end
application,which is suitable to a portable radio or a radio
cassette.
Comparing with conventional types, supply voltage dependence,
overload characteristics and spurious radiation characteristics
are ...
The TA7358PG is designed for a FM front-end application, which
is suitable to a portable radio or a radio cassette.
Comparing with conventional types, supply voltage dependence,
overload characteristics and spuious radiation characteristics are ...
The TA2030FNG is a TV / FM system front end IC, which is
developed for headphone radio in 1.5V use.
It is built in FM F / E and TV F / E (japanese VHF band). ...
The M51348 is a low supply voltage, low power semiconductor IC for compact TV sets which includes Video
Intermediate Frequency (VIF), Sound Intermediate Frequency (SIF), and Synchronous Separation (Sync. Sep.)
functions. ...
The M52334FP is IF signal-processing IC for VCRs and TVs. It enables the PLL detection system despite size as small
as that of conventional quasi-synchronous VIF/SIF detector, IF/RF AGC, SIF limiter and FM detector. ...
The M52342FP is IF signal-processing IC for VCRs and TVs. It enables the PLL detection system despite size as small
as that of conventional quasi-synchronous VIF/SIF detector, IF/RF AGC, SIF limiter, FM detector, QIF AGC and EQ
AMP. ...
M61110FP is a semiconductor integrated circuit consisting of VIF/SIF signal processing for CTVs and VCRs.
M61110FP provides low cost and high performance system with the coil-less AFT ...
M61112FP is a semiconductor integrated circuit consisting of IF signal processing for NTSC system. The circuit
includes VIF amplifier, Video detector, Coil-less VCO, APC detector, IF/RF AGC, SIF limiter and FM detector
functions, which permits a smaller ...
The M61113FP is a semiconductor integrated circuit built-in the PLL inter-carrier method VIF/SIF dedicated to NTSC.
The circuit includes the VIF amplifier, image waveform detection, APC detection, IF/RF, AGC, VCO, AFT, LOCK
DET, EQ, AF amplifier, limitter, ...
This APS3603 active splitter from ANADIGICS accepts a broadband RF input from 50 MHz to 1 GHz and splits the signal to provide two broadband RF outputs with minimal degradation of quality. The single-package surface mount device amplifies the input using ...
This active splitter from ANADIGICS accepts a balanced RF input in the 50 MHz to 1.1 GHz frequency range and provides three balanced RF outputs with minimal degradation in signal quality. The single-package surface mount device amplifies the input signals ...
This APS3605 active splitter from ANADIGICS accepts a broadband RF input from 50 MHz to 1 GHz and splits the signal to provide three broadband RF outputs with minimal degradation of quality. The single-package surface mount device amplifies the input using ...
This active splitter from ANADIGICS accepts a balanced RF input in the 50 MHz to 1.1 GHz frequency range and provides three balanced RF outputs with minimal degradation in signal quality. The single package surface mount device amplifies the input signals ...
This APS3611 active splitter from ANADIGICS accepts a broadband RF input from 50 MHz to 870 MHz and splits the signal to provide two broadband RF outputs with minimal degradation of quality. The single-package surface mount device amplifies the input using ...
The uPC8220T5A is MCP (Multi Chip Packaging) IC consisted of silicon germanium (SiGe) bipolar process and
LDMOS designed for use as transmitting and receiving for 1.9 GHz PHS.
This device is packaged in surface mount 16-pin plastic TSON (Thin Small Outline ...
The uPB1512TU is a silicon germanium (SiGe) monolithic integrated circuit designed as a divide by 8 prescaler IC
for satellite communications and point-to-point/multi-point radios. ...
The KIA6058S/AS are designed for a FM front-end application,
which are suitable to a portable radio or a radio cassette.
Comparing with conventional types, supply voltage dependence,
overload characteristics and spurious radiation characteristics
are ...
Audio IC (RF) KIA6058F The KIA6058F are designed for a FM front-end application,
which are suitable to a portable radio or a radio cassette.
Comparing with conventional types, supply voltage dependence,
overload characteristics and spurious radiation ...
NJG1704KC1 is a front-end GaAs MMIC including a LNAa local amplifier and a mixerdesigned mainly for 800MHz band cellular phone handsets. The ultra small & ultra thin FLP10-C1 package is applied. ...
NJG1704V is a front-end GaAs MMIC including a LNAa local amplifier and MIXERdesigned mainly for 800MHz band cellular phone. NJG1704V exhibits low noise of 1.7dB at low current consumption of 9.0mA total. ...
NJG1705V is a front-end GaAs MMIC including a LNAa local amplifier and a Mixerdesigned mainly for 1.5 and 1.9GHz band cellular phone handsets.NJG1705V exhibits low noise of 16dB at 1.5GHz and 2.1dB at 1.9GHz at low total current consumption of 9.5mA. ...
NJG1709KC1 is a front-end GaAs MMIC including a LNAa local amplifier and a mixerdesigned mainly for 1.5 or 1.9GHz band cellular phone. The ultra small & ultra thin FLP10 package is applied. ...
NJG1711KC1 is a front-end GaAs MMIC including a LNAa local amplifier and a mixerdesigned mainly for 800MHz band cellular phone handsets. The ultra small & ultra thin FLP10-C1 package is applied. ...
NJG1712KC1 is a front-end MMIC including a LNAa local amplifier and a mixerdesigned mainly for 800MHz band CDMA/AMPS. The performance of mixer and the parts count of external circuits may be optimized during development. The ultra small & ultra thin FLP10-C1 ...
NJG1714KC1 is a front-end GaAs MMIC including a LNAa local amplifier and a mixerdesigned mainly for 1.9GHz band cellular phone handsets. The external adjustment circuit is built into NJG1714KC1. The ultra small & ultra thin FLP10 package is applied. ...
The NJG1715KC1 is a front-end GaAs MMIC including a LNAa mixer with a local amplifier. The main application is front-end of W-CDMA cellular phone handsets. The NJG1715KC1 features low noise figurehigh gain and high input IIP3. The ultra small & ultra thin ...
The SKY77436 FEM, a fully matched module for WCDMA applications, integrates interstage filter, input and output matching, power amplifier, power detection, and duplexer into a single 4 mm x 7 mm x 1.2 mm package. The SKY77436 meets stringent spectral ...
The SKY774134 FEM meets the stringent spectral requirements of WCDMA standards up to 243.8 dBm output power. Rf Front-End Integration greatly simplifies handset radio design; all critical matching between the interstage filter, PA, power detection, and ...
The SKY77435 FEM, a fully matched module for WCDMA applications, integrates interstage filter, input and output matching, power amplifier, power detection, and duplexer into a single 4 mm x 7 mm x 1.2 mm package. The SKY77435 meets stringent spectral ...
SKY77519 is a very low profile TX-RX FEM designed for quad-band cellular handsets comprising GSM850/900, DCS1800, and PCS1900 operation, and Class 12 GPRS multi-slot operation and EDGE Polar Modulation. Switch-through support is provided by a dedicated WCDMA ...
SKY77520 is a TX-RX FEM designed for handsets comprising quad band GSM850/900, DCS1800, PCS1900. (SKY77520 is also designed to partner with the SKY74200 RF Transceiver in the Helios DigRF Subsystem.)
Two HBT PA blocks fabricated onto separate InGaP dies ...
SKY77517 is a TX-RX FEM with iPAC for dual-band cellular handsets comprising GSM850 and PCS1900 operation and supports Class 12 GPRS multi-slot operation. The module consists of two HBT PA blocksfor GSM850 and PCS1900 bandsfabricated onto a single Gallium ...
The SKY65225-11 Intera nFEM combines two complete dual-band
transmit/receive chains in one compact RF front end module
optimized for 2 x 2 MIMO (multiple in ,multiple out) operation, in
compliance with the 802.11n draft standard. The SKY65225-11
includes ...
The SKY65206-13 is an integrated Intera Rf Front-End module for
802.11b/g WLAN applications. A single supply voltage and a posi-
tive supply switch control simplifies bias requirements. The PA is
manufactured using the Skyworks InGaP HBT process. Modules ...
The SKY65249-11 Intera FEM contains one complete 2.4 GHz
transmit/receive chain in a compact Rf Front-End module
optimized for single band 2.4,.5 GHz operation. The
SKY65249-11 includes a PA with integrated input filtering for
3.2,.3 GHz rejection, and ...
The SKY65227-11 Intera nFEM contains two complete 2.4 GHz
transmit/receive chains in one compact Rf Front-End module
optimized for single band 2.4 GHz MIMO (multiple inultiple out)
operation, in compliance with the 802.11n draft standard. The
SKY65227-11 ...
The SKY65228-11 Intera nFEM contains two complete
4.9,.85 GHz transmit/receive chains in one compact Rf Front-End
module optimized for single band 4.9,.85 GHz MIMO (multiple
inultiple out) operation, in compliance with the 802.11n draft
standard. The ...
The SKY65230-11 Intera nFEM combines two complete dual-band
transmit/receive chains in one compact RF front end module
optimized for 2 x 2 MIMO (multiple inultiple out) operation, in
compliance with the 802.11n draft standard. The SKY65230-11
includes two ...
The RF3388 is a single-chip dual-band integrated front-end module (FEM) for high-
performance WLAN applications in the 2.5GHz and 5GHz ISM bands. The RF3388
addresses the need for aggressive size reduction for a typical 802.11a/b/g RF
front-end design and ...
The RF5388 is a single-chip dual-band integrated front-end module (FEM) for high-
performance WLAN applications in the 2.5GHz and 5GHz ISM bands. The RF5388
addresses the need for aggressive size reduction for a typical 802.11a/b/g RF
front-end design and ...
The RF5389 is a single-chip dual-band integrated front-end module (FEM) for high-
performance WLAN applications in the 2.5GHz and 5GHz ISM bands. The RF5389
addresses the need for aggressive size reduction for typical 802.11a/b/g and 1x2
11n MIMO RF ...
The RF5924 FEM is a single integrated module for high-
performance WLAN applications in the 2.4GHz to
2.5GHz ISM band. The FEM has integrated b/g power
amplifier, power detector, RX balun, and TX filtering. Also,
it is capable of switching between WLAN RX, ...
The AFEM-7780 is a fully matched WCDMA Band1 Frond-
End Module (FEM) featuring the integration of Avago
Technologies power amplifer and FBAR.
The AFEM-7780 ofers extended talk time and excellent
linearity by using CoolPAM technology, which ...
The SE2521A60 is a complete 802.11 b/g WLAN RF
front-end module providing all the functionality of the
power amplifier, power detector, T/R switch, diversity
switch and associated matching. The SE2521A60
provides a complete 2.4 GHz WLAN RF solution ...
The SE2521A80 is a complete 802.11 b/g WLAN RF
front-end module providing all the functionality of the
power amplifier, power detector, T/R switch, diversity
switch and associated matching. The SE2521A80
provides a complete 2.4 GHz WLAN RF solution ...
The SE2585L is a complete 802.11 b/g WLAN RF
front-end module with a Bluetooth port. The device
provides all the functionality of the power amplifier,
power detector, filter, SP3T switch and associated
matching. The SE2585L provides a complete 2.4 GHz ...
The SE2545A23 is a complete 802.11n WLAN RF
front-end module providing all the functionality of the
power amplifiers, power detector, T/R switch,
diplexers and associated matching. The SE2545A23
provides a complete 2.4 GHz and 5 GHz WLAN
Multiple ...
The SE2545A30 is a complete 802.11n WLAN RF
front-end module providing all the functionality of the
power amplifiers, power detector, T/R switch,
diplexers and associated matching. The SE2545A30
provides a complete 2.4 GHz and 5 GHz WLAN
Multiple ...
The SE2546A30 is a complete 802.11n WLAN RF
front-end module providing all the functionality of the
power amplifiers, power detector, T/R switch,
diplexers and associated matching. The SE2546A30
provides a complete 2.4 GHz and 5 GHz WLAN
Multiple ...
The SE4120L is a highly-integrated GNSS radio front
end IC offering high performance and low power
operation in a wide range of low-cost applications. It
supports GPS and dual-mode L1-band GPS/Galileo
products. The SE4120L features a conditioned ...
The SE2554L is a complete 802.11 b/g WLAN RF
front-end module providing all the functionality of the
power amplifier, power detector, T/R switch, diversity
switch and associated matching. The SE2554L
provides a complete 2.4 GHz WLAN RF solution from ...
The SE2558L20 is a complete 802.11 b/g WLAN RF
front-end module providing all the functionality of the
power amplifier, power detector, T/R switch, diversity
switch and associated matching. The SE2558L20
provides a complete 2.4 GHz WLAN RF solution ...
The SE2559L20 is a complete 802.11 b/g WLAN RF
front-end module providing all the functionality of the
power amplifier, power detector, T/R switch, diversity
switch and associated matching. The SE2559L20
provides a complete 2.4 GHz WLAN RF solution ...
The SE2547A is a complete 802.11a/b/g/n WLAN RF
front-end module providing all the functionality of the
power amplifiers, filtering, power detector, Diversity
switch, diplexers and associated matching. The
SE2547A provides a complete 2.4 GHz and 5 GHz ...
The SE2548A is a complete 802.11a/b/g/n WLAN RF
front-end module providing all the functionality of the
power amplifiers, filtering, power detector, T/R switch,
diplexers and associated matching. The SE2548A
provides a complete 2.4 GHz and 5 GHz WLAN ...
The SE2593A20 is a complete 802.11n WLAN RF
front-end module providing all the functionality of the
power amplifiers, LNA, power detector, T/R switch,
diplexers and associated matching. The SE2593A20
provides a complete 2.4 GHz and 5 GHz WLAN ...
The SKY65233-11 Intera nFEM combines two complete 2.4 GHz
transmit/receive chains in one compact RF front end module
optimized for 2 x 2 MIMO (multiple inmultiple out) operation, in
compliance with the 802.11n draft standard. The SKY65233-11
includes two 2 ...
The SKY65234-11 Intera nFEM combines two complete
transmit/receive chains in one compact RF front end module opti-
mized for single-band 4.95.85 GHz 2 x 2 MIMO (multiple
inmultiple out) operation, in compliance with the 802.11n draft
standard. The ...
