LNA
  • Product pinout
  • Description
  • MC13821,MC13821: Low Noise Amplifier With Bypass Switch
  • The MC13821 is a high gain LNA with extremely low noise figure, designed for cellular, GPS and ISM band applications. An integrated bypass switch is included to preserve input intercept performance. The input and output match are external to allow maximum ...
  • MC13820,MC13820: Low Noise Amplifier With Bypass Switch
  • The MC13820 is a high gain LNA with extremely low noise figure, designed for cellular, GPS and ISM band applications. An integrated bypass switch is included to preserve input intercept performance. The input and output match are external to allow maximum ...
  • ATR0610,ATR0610 2.7-V GPS Low-noise Amplifier
  • The ATR0610 is a GPS low-noise amplifier IC designed for GPS applications. The part uses Atmels SiGe1 SiGe technology nd is optimized for high linearity, low-noise figure, low BOM and low power consumption. The part features an integrated 50, out- put match ...
  • MAX2611,MAX2611 DC-to-Microwave, Low-Noise Amplifier
  • The MAX2611 is a low-voltage, low-noise amplifier for use from DC to microwave frequencies. Operating from a single +5V supply, it has a 3dB bandwidth of 1100MHz. The MAX2611\'s low noise figure and high drive capability make it ideal for a variety of ...
  • MAX2650,MAX2650 DC-to-Microwave, +5V Low-Noise Amplifier
  • The MAX2650 is a low-noise amplifier for use from DC to microwave frequencies. Operating from a single +5V supply, it has a flat gain response to 900MHz. The MAX2650\'s low noise figure and high drive 643 capability make it ideal for a variety of transmit, ...
  • MAX2406,MAX2406 Low-Cost Downconverter With Low-Noise Amplifier
  • The MAX2406 low-noise amplifier (LNA)/downconverter mixer is designed for use over a wide range of frequencies and is optimized for communications systems operating at a frequency of 1.9GHz. Applications include PWT1900/DCT1900, DCS1800/PCS1900, PHS, and DECT. ...
  • MAX2323,MAX2323, MAX2325 Triple/Dual-Mode CDMA LNA/Mixers
  • The MAX2323/MAX2325 are low-noise amplifier (LNA) plus mixer ICs optimized for code-division multiple-access (CDMA) applications in both cellular and PCS bands. The MAX2323 addresses dual-band, triple-mode CDMA applications by providing switched signal paths ...
  • MAX2325,MAX2323, MAX2325 Triple/Dual-Mode CDMA LNA/Mixers
  • The MAX2323/MAX2325 are low-noise amplifier (LNA) plus mixer ICs optimized for code-division multiple-access (CDMA) applications in both cellular and PCS bands. The MAX2323 addresses dual-band, triple-mode CDMA applications by providing switched signal paths ...
  • MAX2338,MAX2338 Triple/Dual-Mode CDMA LNA/Mixers
  • The MAX2338 receiver RF front-end IC is designed for dual-band CDMA cellular phones and can also be used in dual-band TDMA, GSM, or EDGE cellular phones. Thanks to the MAX2338\'s on-chip low-power LO divider, the cellular VCO module can be eliminated.
  • MAX2644,MAX2644 2.4GHz SiGe, High IP3 Low-Noise Amplifier
  • The MAX2644 low-cost, high third-order intercept point (IP3) low-noise amplifier (LNA) is designed for applications in 2.4GHz WLAN, ISM, and Bluetooth radio systems. It features a programmable bias, allowing the input IP3 and supply current to be optimized for ...
  • MAX3524,MAX3524 Low-Noise, High-Linearity Broadband Amplifier
  • The MAX3524 broadband amplifier is designed specifically for cable television receiver and cable modem applications. The MAX3524 is a single-ended input, differential-output low-noise amplifier (LNA) that offers 15dB of gain. It operates from a +4.75V to ...
  • MAX2387,MAX2387, MAX2388, MAX2389 W-CDMA LNA/Mixer ICs
  • The MAX2387/MAX2388/MAX2389 low-noise amplifier (LNA), downconverter mixers designed for W-CDMA applications, are ideal for ARIB (Japan) and ETSI-UMTS (Europe) based systems. The MAX2387/MAX2388/MAX2389 feature ultra-low current consumption and exceptionally ...
  • MAX2388,MAX2387, MAX2388, MAX2389 W-CDMA LNA/Mixer ICs
  • The MAX2387/MAX2388/MAX2389 low-noise amplifier (LNA), downconverter mixers designed for W-CDMA applications, are ideal for ARIB (Japan) and ETSI-UMTS (Europe) based systems. The MAX2387/MAX2388/MAX2389 feature ultra-low current consumption and exceptionally ...
  • MAX2389,MAX2387, MAX2388, MAX2389 W-CDMA LNA/Mixer ICs
  • The MAX2387/MAX2388/MAX2389 low-noise amplifier (LNA), downconverter mixers designed for W-CDMA applications, are ideal for ARIB (Japan) and ETSI-UMTS (Europe) based systems. The MAX2387/MAX2388/MAX2389 feature ultra-low current consumption and exceptionally ...
  • MAX2648,MAX2648 5GHz To 6GHz Low-Noise Amplifier In 6-Pin UCSP
  • The MAX2648 high-linearity, silicon-germanium (SiGe) low-noise amplifier (LNA) is designed for 5GHz wireless LAN systems based on IEEE 802.11a and HiperLAN2 standards. The LNA provides high gain, low noise, and high linearity performance, allowing it to be ...
  • MAX2371,MAX2371, MAX2373 LNAs With Step Attenuator And VGA
  • The MAX2371/MAX2373 wideband low-noise amplifier (LNA) ICs are designed for direct conversion receiver (DCR) or very low intermediate frequency (VLIF) receiver applications. They contain single-channel, single-ended LNAs with switchable attenuator and ...
  • MAX2373,MAX2371, MAX2373 LNAs With Step Attenuator And VGA
  • The MAX2371/MAX2373 wideband low-noise amplifier (LNA) ICs are designed for direct conversion receiver (DCR) or very low intermediate frequency (VLIF) receiver applications. They contain single-channel, single-ended LNAs with switchable attenuator and ...
  • MAX2649,MAX2649 5GHz Low-Noise Amplifier With Shutdown
  • The MAX2649 high-linearity, silicon-germanium (SiGe) low-noise amplifier (LNA) is designed for 5GHz wireless LAN systems based on IEEE 802.11a and HiperLAN2 standards. The MAX2649 achieves a 2.1dB noise figure, 17dB gain, and 0dBm IIP3, making it ideal as a ...
  • HMC287MS8,Low Noise Amplifier SMT W/AGC, 2.4 - 2.5 GHz
  • The HMC287MS8(HMC287MS8E) is a low cost Low Noise Amplifier (LNA) offering 21 dB of gain and a 2.5 dB noise figure from a single positive +3V supply that requires only 9 mA. The HMC287MS8(HMC287MS8E) can be used as a variable gain LNA offering 30 dB of gain ...
  • HMC460,Wideband Low Noise Amplifier Chip, DC - 20 GHz
  • The HMC460 is a GaAs MMIC PHEMT Low Noise Distributed Amplifier die which operates between DC and 20 GHz. The amplifier provides 14 dB of gain, 2.5 dB noise figure and +16 dBm of output power at 1 dB gain compression while requiring only 60 mA from a +8V ...
  • HMC-C001,Wideband Low Noise Amplifier Module, 2 - 20 GHz
  • The HMC-C001 is a GaAs MMIC PHEMT Low Noise Distributed Amplifier in a miniature, hermetic module with replaceable SMA connectors which operates between 2 and 20 GHz. The self-biased amplifier provides 15 dB of gain, 2 to 3 dB noise figure and +14 ...
  • HMC-C002,Wideband Low Noise Amplifier Module, 2 - 20 GHz
  • The HMC-C002 is a GaAs MMIC PHEMT Low Noise Distributed Amplifier in a miniature, hermetic module with replaceable SMA connectors which operates between 2 and 20 GHz. The self-biased amplifier provides 13 dB of gain, 2 to 3 dB noise figure and up to +18 dBm of ...
  • BGA615L7,GPS LNA Silicon Germanium GPS Low Noise Amplifier
  • GPS LNA BGA615L7 Silicon Germanium GPS Low Noise Amplifier The BGA615L7 is a front-end low noise amplifier for Global Positioning System (GPS) applications. The LNA provides 18 dB gain, 0.9 dB noise figure and high linearity performance, allowing it to be ...
  • BGA734L16,UMTS LNA Low Power Tri-Band UMTS LNA
  • UMTS LNA BGA734L16 Low Power Tri-Band UMTS LNA The BGA734L16 is a highly flexible tri-band (2100, 1900, 850/800 MHz) low noise amplifier MMIC for worldwide use. Based on Infineons proprietary and cost-effective SiGe:C technology, the BGA734L16 features ...
  • BGA700L16,WLAN LNA BGA700L16 Dual-Band WLAN LNA
  • WLAN LNA BGA700L16 The BGA700L16 is a dual-band 2.4-2.5 GHz and 4.9-5.95 GHz Silicon Germanium low noise amplifier MMIC in tiny PG-TSLP-16-1-package. The LNA is based upon Infineon Technologies cost effective B7HF Silicon Germanium technology. The LNA ...
  • ABA3100,Cable & Broadcast Low Noise Amplifiers ABA3100
  • The ABA3100 is a monolithic IC intended for use in applications requiring high linearity such as: Cellular Telephone Base Station Driver Amplifiers, CATV Fiber Receiver/Distribution Amplifiers, CATV Drop Amplifiers, CATV Settop Boxes and Home Gateway. Supplied ...
  • ABA3101,Cable & Broadcast Low Noise Amplifiers ABA3101
  • The ABA3101 is a monolithic IC intended for use in applications requiring high linearity, such as Cellular Telephone Base Station Driver Amplifiers, CATV Fiber Receiver and Distribution Amplifiers, CATV Drop Amplifiers, CATV Set Top Boxes, and Home Gateways. ...
  • ABA3115,Cable & Broadcast Low Noise Amplifiers ABA3115
  • The ABA3100 is a monolithic IC intended for use in applications requiring high linearity such as: Cellular Telephone Base Station Driver Amplifiers, CATV Fiber Receiver/Distribution Amplifiers, CATV Drop Amplifiers, CATV Settop Boxes and Home Gateway. Supplied ...
  • ABA3130,Cable & Broadcast Low Noise Amplifiers ABA3130
  • The ABA3130 is a low noise amplifier with gain control that accepts a single-ended RF input in the 50 MHz to 1.1 GHz frequency range and provides a balanced RF output with minimal degradation in signal quality. This highly integrated device amplifies the input ...
  • ADA1200,Cable & Broadcast Low Noise Amplifiers ADA1200
  • The ADA1200 is a highly linear drop amplifier developed to meet the stringent requirements of CATV systems. Offered in a low cost SOT-89 package, this GaAs MESFET design offers low noise and low distortion over a wide range of frequencies. The device is ...
  • UPC8230TU,SiGe:C LOW NOISE AMPLIFIER FOR GPS
  • The uPC8230TU is a silicon germanium carbon (SiGe:C) monolithic integrated circuit designed as low noise amplifier for GPS. This device exhibits low noise figure and high power gain characteristics, so this IC can improve the sensitivity of GPS receiver. ...
  • UPC8232T5N,SiGe:C LOW NOISE AMPLIFIER FOR GPS
  • The uPC8232T5N is a silicon germanium carbon (SiGe:C) monolithic integrated circuit designed as low noise amplifier for GPS. This device exhibits low noise figure and high power gain characteristics, so this IC can improve the sensitivity of GPS ...
  • UPC8236T6N,SiGe:C LOW NOISE AMPLIFIER FOR GPS
  • The uPC8236T6N is a silicon germanium carbon (SiGe:C) monolithic integrated circuit designed as low noise amplifier for GPS. This device exhibits low noise figure and high power gain characteristics, so this IC can improve the sensitivity of GPS ...
  • RF3865,Two Stage Low Noise Amplifier RF3865
  • The RF3865 is a low noise amplifier with a high output IP3. The amplifier is self-biased from a single voltage supply with 50 input and output ports. The useful frequency range is from 700MHz to 3800MHz. A 1dB noise figure and 36dBm OIP3 performance is ...
  • RF3866,Two Stage Low Noise Amplifier RF3866
  • The RF3866 is a low noise amplifier with a high output IP3. The amplifier is self-biased from a single voltage supply with 50 input and output ports. The useful frequency range is from 700MHz to 3800MHz. A 0.8dB noise figure and 36dBm OIP3 performance is ...
  • RF2370,3V Low Noise Amplifier RF2370
  • The RF2370 is a switchable low noise amplifier with a very high dynamic range designed for digital cellular and WLAN applications. The device functions as an outstand- ing front end low noise amplifier. The bias current may be set externally. The IC is ...
  • RF2374,3V Low Noise Amplifier RF2374
  • The RF2374 is a switchable low noise amplifier with a high dynamic range designed for digital cellular and WLAN applications. The device functions as an outstanding front end low noise amplifier with I as low as 3mA. CC The bias current may be set ...
  • RF5117,3 V, 1.8 GHz To 2.8 GHz Linear Power Amplifier RF5117
  • The RF5117 is a linear, medium-power, high-efficiency amplifier IC designed specifically for battery-powered WLAN applications such as PC cards, mini PCI, and compact flash applications. The device is manufactured on an advanced Gallium Arsenide ...
  • RF3861,Single Stage Low Noise Amplifier RF3861
  • The RF3861 is a low noise amplifier with a high output IP3. The amplifier is self-biased from a single voltage supply with 50 input and output ports. The useful frequency range is from 700MHz to 3800MHz. A 1dB noise figure and 36dBm OIP3 performance is ...
  • TGA2513,Wideband LNA
  • The TriQuint TGA2513 is a compact LNA Gain Block MMIC. The LNA operates from 2-23 GHz and is designed using TriQuints proven standard 0.15 um gate pHEMT production process. The TGA2513 provides a nominal 16 dBm of output power at 1 dB gain ...
  • TGA2513-SM,Wideband LNA
  • The TriQuint TGA2513-SM is a packaged LNA Gain Block. The LNA operates from 2-20 GHz and is designed using TriQuints poven standard 0.15 um gate pHEMT production process. The TGA2513-SM provides a nominal 16 dBm of output power at 1 dB gain ...
  • TGA2514-EPU,Ku-Band 6.5 W Power Amplifier
  • The TriQuint TGA2514-EPU is a compact 6.5 W Ku-band Power Amplifier which operates from 13-18 GHz. The TGA2514-EPU is designed using TriQuints proven standard 0.25-m ga pHEMT production process. The TGA2514-EPU provides a nominal 38 dBm of saturated ...
  • TGA2514-FL,6.5 Watt Ku Band Power Amplifier
  • The TGA2514-FL provides 24 dB of gain and 6.5W of output power across 13-16 GHz. The TGA2514-FL is designed using TriQuints proven standard 0.25-, gate pHEMT production process. This device is ideally suited for VSAT Transmitter and Point to Point ...
  • TGA2520,12 - 16 GHz High Linearity Amplifier
  • The TriQuint TGA2520 MMIC is an extremely linear, high gain amplifier, capable of 1 Watt output power at P1dB for the frequency range of 12 ,16 GHz. This performance makes this amplifier ideally suited for Point to Point Radios and current Ku-Band ...
  • TGA4811,DC - 60GHz Low Noise Amplifier
  • The TriQuint TGA4811 is a DC - 60 GHz low noise amplifier that typically provides 15 dB small signal gain and input and output return loss is <10dB. Normal Noise Figure is 3.0 dB from 2 - 40 GHz. P1dB is 13 dBm. The TGA4811 is an excellent choice ...
  • TGA4830,Wideband Low Noise Amplifier
  • The TriQuint TGA4830 is a medium power wideband low noise amplifier which operates from DC to 45 GHz. Typical small signal gain is 13dB with >20dB AGC range. Typical input and output return loss is 15dB. The TGA4830 provides 11.5 dBm of typical ...
  • TGA8061-SCC,Low Noise Amp, SB
  • The TriQuint TGA8061-SCC is a GaAs monolithic low noise amplifier intended for use as a universal gain block in applications requiring simultaneous flat gain, low noise figure, and low SWR over a very wide bandwidth. Three FET stages with resistive ...
  • TGA8310-SCC,Low Noise Amp, AGC
  • The TriQuint TGA8310-SCC is a monolithic low noise distributed amplifier, which operates from 2 to 20 GHz. Typical noise figure is 4 dB. Nine 122 um gatewidth FETs typically provide 17.5 dBm of output power at 1 dB gain compression and 9 dB typical small ...
  • TQ3131,832-894 MHz Low Noise Amp
  • The TQ3131 is a 3V, RF LNA IC designed specifically for Cellular band CDMA/AMPS applications. Its RF performance meets the requirements of products designed t the IS-95 and AMPS standards. The TQ3131 is designed to be used with the TQ5131 (CDMA/AMPS ...
  • TQL5000,LNA For 5 GHz UNII Band 802.11a Systems
  • The TQL5000 is a low noise amplifier designed for 802.11a receive applications for the WLAN market. The device exhibits industry-leading noise figure and power consumption while maintaining high intercept performance. It requires a single 3 V supply ...
  • TQM3M7001,802.11a/b/g Dual-Band, Low Noise Amplifier Module
  • The TQM3M7001 is the first of TriQuint`s Dualband WLAN Low Noise Amplifiers in an ultra small 3mm x 3mm footprint package for 802.11a/b/g applications. The architecture and interface are optimized for next generation dual-band WLAN transceivers requiring ...