Single Chip Transceiver For 2.45 Ghz Ism Band - Nxp Semiconductors

The SA2400A is a fully integrated single IC RF transceiver designed for 2.45 GHz Wireless LAN (WLAN) applications. It is a direct conversion Radio architecture that is fabricated on an advanced 30 GHz fT BiCMOS process. The SA2400A combines a receiver, transmitter, and LO generation into a single IC. The receiver consists of a low-noise Amplifier down-conversion mixers, fully integrated channel Filters and an Automatic Gain Control (AGC) with an on-chip closed loop. The transmitter contains power ramping, Filters up-conversion, and pre-drivers. The LO generation is formed by an entirely on-chip VCO and a fractional-N synthesizer. Typical system performance parameters for the receiver are 93 dB gain, 7.5 dB noise figure, input-referred third-order intercept point (IIP3) of +1 dBm, AGC settling time of 8 s, and Tx-to-Rx switching time of 3 s. The transmitter typical system performance parameters are an output power range from 7 dBm to +8 dBm in 1 dB steps, 40 dBc Carrier leakage after calibration, 22 dB sideband suppression, in-band common mode rejection of 30 dB, and Rx-to-Tx switching time of 3 s. By NXP Semiconductors
SA2400A 's PackagesSA2400A 's pdf datasheet
SA2400ABE LQFP

SA2400A pdf datasheet download


SA2400A Pinout, Pinouts
SA2400A pinout,Pin out
This is one package pinout of SA2400A,If you need more pinouts please download SA2400A's pdf datasheet.

SA2400A circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SA2400A Pb-Free SA2400A Cross Reference SA2400A Schematic SA2400A Distributor
SA2400A Application Notes SA2400A RoHS SA2400A Circuits SA2400A footprint