SA56615-XX; SA56616-XX CMOS System Reset With Adjustable Delay Time

The SA56616-XX and SA56615-XX CMOS system resets have low consumption current of typically 1.0 uA and high precision detection voltage within +-2pct. The delay time is adjusted by an external capacitor working in conjunction with the on-chip delay network. The SA56615-XX and SA56616-XX have different output configurations to accommodate a wide variety of Microprocessors and Logic devices. The SA56615-XX incorporates a low side open-drain output topology which requires a pull-up resistor to VDD, while the SA56616-XX incorporates an active push-pull totem pole output topology comprised of complimentary P-channel and N-channel FETs The resets operate over a wide operating supply voltage range from 0.7 V to 10 V. Reset detection voltages are available at 0.9 V, 1.8 V, 1.9 V, 2.0 V, 2.7 V, 2.8 V, 2.9 V, 3.0 V, 3.1 V, 4.2 V, 4.3 V, 4.4 V, 4.5 V, 4.6 V and 4.7 V. Other thresholds are offered upon request at 100 mV increments from 0.9 V to 6.0 V. The device comes in the small outline 5-lead package (SOP003).
By NXP Semiconductors
SA56615-XX 's PackagesSA56615-XX 's pdf datasheet

SA56615-XX Pinout, Pinouts
SA56615-XX pinout,Pin out
This is one package pinout of SA56615-XX,If you need more pinouts please download SA56615-XX's pdf datasheet.

SA56615-XX circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SA56615-XX Pb-Free SA56615-XX Cross Reference SA56615-XX Schematic SA56615-XX Distributor
SA56615-XX Application Notes SA56615-XX RoHS SA56615-XX Circuits SA56615-XX footprint