SA8028 2.5 GHz Sigma Delta Fractional-N / 760 MHz IF Integer Frequency Synthesizers

The SA8028 BICMOS device integrates programmable dividers, Charge Pumps and phase Comparators to implement phase-locked loops. The device is designed to operate from 3 NiCd cells, in pocket phones, with low current and nominal 3 V supplies. The synthesizer operates at VCO input frequencies up to 2.5 GHz. The synthesizer has fully programmable RF, IF, and reference dividers. All divider ratios are supplied via a 3-wire serial programming bus. The RF divider is a fractional-N divider with programmable integer ratios from 33 to 509 and a fractional resolution of 22 programmable bits (23 bits internal). A 2nd order sigma-delta Modulator is used to achieve fractional division. Separate power and ground pins are provided to the Charge Pumps and digital circuits. VDDCP must be equal to or greater than VDD . The ground pins should be externally connected to prevent large currents from flowing across the die and thus causing damage. The Charge Pump current (gain) is fully programmable, while ISET is set by an external resistance at the RSET pin (refer to section 1.5, RF and IF Charge Pumps). The phase/frequency detector charge pump outputs allow for implementing a passive loop Filter
By NXP Semiconductors
SA8028 's PackagesSA8028 's pdf datasheet
SA8028W HBCC

SA8028 pdf datasheet download


SA8028 Pinout, Pinouts
SA8028 pinout,Pin out
This is one package pinout of SA8028,If you need more pinouts please download SA8028's pdf datasheet.

SA8028 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SA8028 Pb-Free SA8028 Cross Reference SA8028 Schematic SA8028 Distributor
SA8028 Application Notes SA8028 RoHS SA8028 Circuits SA8028 footprint