SAA8113HL Digital PC-camera Signal Processor

The SAA8113HL is a 2nd generation camera Digital Signal Processor (DSP) designed for low-cost DTV applications. It integrates the DSP core, the Pulse Pattern Generator (PPG), the 80C51 Microcontroller and the VDAC in one IC. It is the successor of the SAA8110G dedicated to Analog output cameras. The SAA8113HL must be applied together with an Analog front-end that includes a Correlated Double Sampling (CDS), an Automatic Gain Control (AGC) and an Analog-to-digital Converter (ADC). This may be the TDA8786 or the TDA8784. The PPG generates the Timing pulses to drive medium resolution PAL NTSC complementary mosaic CCD Sensors (512 x 492 NTSC and 512 x 582 PAL). The input of the DSP is 10 bits with a maximum pixel frequency equal to 9.66 MHz. The DSP core processes this Sensor signal to a standard Video output signal. The SAA8113HL output is an Analog CVBS Video signal. The Microcontroller provides the settings for the IC Registers from EEPROM at power-up or reset and controls the AWB, AE and AOB loops. It also provides a hardware IC-bus Interface so the Microcontroller CAN be used as an IC-bus slave. The software code is embedded in an internal ROM but it is also possible to use a combined data and address bus, connected to an external program EPROM A built-in Power Management function allows the power dissipation to be optimized.
By NXP Semiconductors
SAA8113HL 's PackagesSAA8113HL 's pdf datasheet



SAA8113HL Pinout, Pinouts
SAA8113HL pinout,Pin out
This is one package pinout of SAA8113HL,If you need more pinouts please download SAA8113HL's pdf datasheet.

SAA8113HL circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SAA8113HL Pb-Free SAA8113HL Cross Reference SAA8113HL Schematic SAA8113HL Distributor
SAA8113HL Application Notes SAA8113HL RoHS SAA8113HL Circuits SAA8113HL footprint
Hot categories