Fixed 3.3V High Output Charge Pump Buck/Boost Regulato

The SC630 is a high-current voltage Regulator using Semtechs proprietary low-noise Charge Pump technol- ogy. Performance is optimized for use in single Li-Ion battery cell applications. The Regulator provides the per- formance of a linear, low drop-out (LDO) voltage Regulator when the battery is greater than 3.3V. Unlike an LDO drop-out is avoided when the battery is less than 3.3V. Instead, a Charge Pump is activated to provide voltage boost the head-room needed for voltage regulation. Only two 2.2F bucket capacitors are required to deliver the full output current. The Charge Pump provides a low EMI solution compared to inductive buck/boost Regulators The SC630s Charge Pump has three modes of operation: 2x, 1.5x, and 1x modes. The 2x and 1.5x modes deliver current to the load in each of two phases. The 1x mode turns of the Charge Pump delivering current through an LDO When active, the Charge Pump provides low-ripple operation at 200kHz, which is typically less than 20mVpp at the output. The SC630 is capable of delivering 400mA continuous current, with peak current to 500mA. A 22F output capacitor of is used for decoupling the load and for smoothing mode transitions. Hysteresis is provided to prevent chatter between Charge Pump modes. By Semtech Corporation
SC630 's PackagesSC630 's pdf datasheet
SC630ULTRT




SC630 Pinout, Pinouts
SC630 pinout,Pin out
This is one package pinout of SC630,If you need more pinouts please download SC630's pdf datasheet.

SC630 Application circuits
SC630 circuits
This is one application circuit of SC630,If you need more circuits,please download SC630's pdf datasheet.


Related Electronics Part Number

Related Keywords:

SC630 Pb-Free SC630 Cross Reference SC630 Schematic SC630 Distributor
SC630 Application Notes SC630 RoHS SC630 Circuits SC630 footprint