Annular PNPN devices 2N5060 designed for high volume consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection circuits. Supplied in an inexpensive plastic TO-226AA (TO-92) ...
Reverse Blocking Thyristors 2N6504 Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits. ...
PNPN devices MCR100-4 designed for high volume, line-powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection circuits. Supplied in an inexpensive plastic TO-226AA ...
Reverse Blocking Thyristors PNPN devices MCR106-6 designed for high volume consumer applications suc temperature, light and speed control; process and remote control, and warning systems where reliability of operation is important. ...
Reverse Blocking Thyristors MCR72-3 Designed for industrial and consumer applications such as temperature, light and speed control; process and remote controls; warning systems; capacitive discharge circuits and MPU interface. ...
Packaged in ISOTOP modules, the MSS40 /
MSS50 Series MSS40, MSS50 is based on two back-to-back SCR
configurations, providing high noise immunity.
They are suitable for high power applications such
as solid state relays, heating control systems, ...
The P0130AA is a gate sensitive SCR, packaged
in TO-92, used in conjunction of a TN22 A.S.D,
and of a resistor in electronic starter for fluores-
cent tubelamps. ...
The TN22 has been specifically developed for use
in electronic starter circuits. Use in conjunction
with a sensitive SCR and a resistor, it provides
high energy striking characteristics with low trig-
gering power. Thanks to its electronic concept, ...
Available in high power packages BTW67, BTW69 , the BTW67 /
BTW69 Series is suitable in applications where
power handling and power dissipation are critical,
such as solid state relays, welding equipment,
high power motor control. ...
Available either in sensitive (TS12) or standard
(TN12 / TYN) gate triggering levels, the 12 A SCR
series TN1215, TS1220, TYN1012, TYN61 is suitable to fit all modes of control, found
in applications such as overvoltage crowbar
protection, motor ...
Specifically designed to control motor in hand
tools application, the TN15 SCR is available in
DPAK package, providing a high robustness
against stalled rotor operating conditions in a
small SMD package ...
The standard TN1625, TYN616, TYN816 16 A SCRs series
is suitable for general purpose applications.
Using clip assembly technology, they provide a
superior performance in surge current
capabilities. ...
Available either in sensitive (TS8) or standard
TN805, TN815, TS820, TYN1008, gate triggering levels, the 8A SCR
series is suitable to fit all modes of control, found
in applications such as overvoltage crowbar
protection, motor control circuits in power ...
The TYN612M SCR is suitable to fit modes of
control found in applications such as voltage
regulation circuits for motorbikes, overvoltage
crowbar protection, motor control circuits in power
tools and kitchen aids, inrush current limiting
circuits, ...
The TYN640, TYN840 series is suitable for applications
where in-rush current conditions are critical, such
as overvoltage crowbar protection circuits in
power supplies, in-rush current limiting circuits,
solid state relays (in back to back ...
Thanks to highly sensitive triggering levels, the
P01 SCR series is suitable for all applications
where available gate current is limited, such as
ground fault circuit interruptors, pilot circuits in
solid state relays, stand-by mode power supplies,
smoke ...
Thanks to highly sensitive triggering levels, the
PO102BL SCR is suitable for all applications
where the available gate current is limited such as
stand-by mode power supplies, smoke and alarm
detectors... ...
Thanks to highly sensitive triggering levels, the
TS420 series is suitable for all applications where
the available gate current is limited, such as motor
control for hand tools, kitchen aids, overvoltage
crowbar protection for low power supplies, ... ...
Thanks to highly sensitive triggering levels, the
X006 SCR series is suitable for all applications
where the available gate current is limited, such
as ground fault circuit interrupters, overvoltage
crowbar protection in low power supplies, ...
Thanks to highly sensitive triggering levels, the
X02 SCR series is suitable for all applications
where the available gate current is limited, such as
ground fault circuit interruptors, overvoltage
crowbar protection in low power supplies,
capacitive ...
Thanks to highly sensitive triggering levels, the
X04 SCR series is suitable for all applications
where the available gate current is limited, such as
capacitive discharge ignitions, motor control in
kitchen aids, overvoltage crowbar protection in ...
Thanks to its highly sensitive triggering levels, the
XL0840 device is suitable for all high volumes appli-
cations where the available gate current is limited,
such as Christmas lights control. ...
