The SN65LBC170 and SN75LBC170 are monolithic integrated circuits designed for bidirectional data communication on multipoint bus-transmission lines. Potential applications include serial or parallel data transmission, cabled peripheral buses with twin axial, ...
The SN65LBC171 and SN75LBC171 are monolithic integrated circuits designed for bidirectional data communication on multipoint bus-transmission lines. Potential applications include serial or parallel data transmission, cabled peripheral buses with twin axial, ...
The SN75970B SCSI differential converter-control, when used in conjunction with one or more of its companion data transceiver(s), provides the superior electrical performance of differential SCSI from a single-ended SCSI bus controller. A 16-bit, Fast-SCSI bus ...
The SN75971B SCSI differential converter-data is a 9-channel RS-485 transceiver. When used in conjunction with its companion control transceiver, the SN75970B, the resulting chip set provides the superior electrical performance of differential SCSI from a ...
The SN65LBC170 and SN75LBC170 are monolithic integrated circuits designed for bidirectional data communication on multipoint bus-transmission lines. Potential applications include serial or parallel data transmission, cabled peripheral buses with twin axial, ...
The SN65LBC171 and SN75LBC171 are monolithic integrated circuits designed for bidirectional data communication on multipoint bus-transmission lines. Potential applications include serial or parallel data transmission, cabled peripheral buses with twin axial, ...
The TL2218-285 is a current-mode 9-channel monolithic terminator specially designed for single-ended small-computer-systems-interface (SCSI) bus termination. A user-controlled disable function is provided to reduce standby power. No impedance-matching ...
The UCC5606 provides 9 lines of active termination for a small computer systems interface (SCSI) parallel bus. The SCSI standard recommends active termination at both ends of the cable segment. The UCC5606 is ideal for high performance 3.3-V SCSI systems. ...
The UCC5614 provides 9 lines of active termination for a small computer system?s interface (SCSI) parallel bus. The SCSI standard recommends active termination at both ends of the cable segment. The UCC5614 is ideal for high performance 3.3-V SCSI ...
The UCC5617 provides 18 lines of active termination for a SCSI (Small Computers Systems Interface) parallel bus. The SCSI standard recommends and Fast-20 (Ultra) requires active termination at both ends of the cable. Pin for pin compatible with the ...
The UCC5618 provides 18 lines of active termination for a SCSI (Small Computers Systems Interface) parallel bus. The SCSI standard recommends and Fast?20 (Ultra) requires active termination at both ends of the cable. Pin for pin compatible with the UC5601 ...
UCC5619 provides 27 lines of active termination for a SCSI (Small Computer Systems Interface) parallel bus. The SCSI standard recommends active termination at both ends of the cable. The UCC5619 is ideal for high performance 5V SCSI systems. During ...
UCC5620 provides 27 lines of active termination for a SCSI (Small Computer Systems Interface) parallel bus. The SCSI standard recommends active termination at both ends of the cable. The UCC5620 is ideal for high performance 5V SCSI systems. During ...
The UCC5628 Multimode SCSI terminator provides a smooth transition into the low-voltage differential SCSI parallel interface (SPI-2, SPI-3 and SPI-4). It automatically senses the bus, via DIFFB, and switches the termination to either single ended (SE) or ...
The UCC5630A Multimode SCSI Terminator provides a smooth transition into the LVD SCSI Parallel Interface (SPI-2, SPI-3, SPI-4). It automatically senses the bus, via DIFFB, and switches the termination to either single ended (SE) or low voltage differential ...
The UCC5638 Multimode SCSI Terminator provides a smooth transition into the LVD SCSI Parallel Interface (SPI-2, SPI-3, SPI-4). It automatically senses the bus, via DIFFB, and switches the termination to either single ended (SE) or low voltage differential ...
The UCC5640 is an active terminator for low voltage differential (LVD) SCSI networks. This LVD only design allows the user to reach peak bus performance while reducing system cost. The device is designed as an active Y-terminator to improve the frequency ...
The UCC5672 Multi-Mode Low Voltage Differential and Single Ended Terminator is both a single ended terminator and a low voltage differential terminator for the transition to the next generation SCSI Parallel Interface (SPI-3). The low voltage differential is a ...
The UCC5680 is an LVD-only Small Computer System Interface (SCSI) terminator that integrates the mode change delay function required by the SPI-3 specification. The device senses what types of SCSI drivers are present on the bus via the voltage on the DIFFSENS ...
The UCC5686 is a twenty-seven line active terminator for low-voltage-differential (LVD) SCSI networks. This LVD SCSI-only design allows the user to reach peak bus performance, while reducing system cost. The device is designed as an active Y-terminator to ...
The UCC5696 is a 27-line LVD only SCSI programmable terminator. The nominal settings on power up are compliant to SPI?2 through SPI?4. The programmable settings are used for SPI?5. The UCC5696 uses the I2C to program the differential impedance and the ...
The SN75LBC968 is a nine-channel transceiver with active termination that drives and receives the signals from the single-ended, parallel data buses such as the Small Computer-Systems Interface (SCSI) bus. The features of the line drivers, receivers, and ...
The SN75LBC978 is a nine-channel differential transceiver based on the 75LBC176 LinASIC? cell. Use of TI?\'s LinBiCMOS? process technology allows the power reduction necessary to integrate nine differential balanced transceivers. On-chip enabling logic makes ...
Fast SCSI and Ultra SCSI require the use of active terminations at both ends of every cable segment in a SCSI system with single-ended drivers and receivers. The DS2105 SCSI terminator, which is fully compliant with these standards, enables the designer to ...
The DS2108 integrates 18 330-ohm and nine 150-ohm precisely switched resistors for terminating nine high-voltage differential (HVC) SCSI pairs of lines and includes a power-down feature. The power-down can be switched via software, which is simpler than ...
The DS2109 is intended for one-chip Plug and Play (PnP) SCSI termination. Plug and Play SCSI requires the exit-point terminator on computer motherboards or host bus adapters to automatically switch off if an external device is connected to the system. The ...
The DS2114 is designed to terminate cable assemblies and devices that do not require isolation from the SCSI bus. The small package integrates a voltage regulator and nine precisely trimmed 1100 resistors that actively terminate nine signal lines in compliance ...
The DS2118M Ultra3 LVD/SE SCSI terminator is both a low-voltage differential (LVD) and single-ended
(SE) terminator. The multimode operation enables the designer to implement LVD in current
products while allowing the end-user SE-backward compatibility with ...
The DS2119M Ultra3 LVD/SE SCSI terminator is both a low-voltage differential (LVD) and single-ended (SE) terminator. The multimode operation enables the designer to implement LVD in current products while allowing the end-user SE-backward compatibility with ...
The DS21T05 is functionally compatible with the DS21T07 providing resistance values for SCSI-1, Fast, and Ultra SCSI but with relaxed output current and termination tolerances. Each chip actively terminates cable segments in SCSI systems carrying nine ...
The DS21T07 is backward-compatible with the DS2107, DS2107A, and DS21S07 providing precision resistance values for SCSI-1, Fast, and Ultra SCSI with 2% tolerance on the resistors and voltage regulator. The DS21T07 actively terminates cable segments in ...
The DS21T09 is intended for one-chip Plug and Play (PnP) SCSI termination. PnP SCSI requires the exit-point terminator on computer motherboards or host bus adapters to automatically switch off if an external device is connected to the system. The DS21T09 ...
The DS2120 Ultra3 LVD SCSI terminator is a low-voltage differential (LVD) terminator. If the device is connected in an LVD-only bus, the DS2120 uses LVD termination. If any single-ended (SE) or highvoltage differential (HVD) devices are connected to the bus, ...
The DS2125 Ultra3 LVD/SE SCSI terminator is both a low-voltage differential (LVD) and single-ended
(SE) terminator. The multimode operation enables the designer to implement LVD in current products
while allowing the end user SE backward compatibility with ...
The LX5250/52 is a multimode SCSI
terminator that is compatible with the
SCSI SPI-2 (Ultra2 SCSI), SCSI SPI-3
(Ultra3 SCSI or Ultra160 SCSI), and
SCSI SPI-4 (Ultra320) specifications
developed by the T10 standards
committee for low voltage ...
The LX5251 is a multimode SCSI
terminator that is compatible with the
SCSI SPI-2 (Ultra2), SCSI SPI-3 (Ultra3
or Ultra160), and SCSI SPI-4 (Ultra320)
specifications developed by the T10
standards committee for low voltage
differential (LVD) ...
ZiLOG\'s Z53C80 SCSI (Small Computer System Interface) controller is designed to implement the SCSI protocol as defined by the ANSI X3.131-1986 standard. This device is fully compatible with the industry standard 5380, and is capable of operating in either ...
The Z86017 and Z16017 MCUs are general-purpose adapter chips used on the card side of the PCMCIA interface. These chips are easily configured to allow access to all types of memory or I/O-mapping peripherals, such as Ethernet controllers, Universal ...
The SCSI-2 standard recommends the use of active ter-
minations at both ends of every cable segment in a
SCSI system with single-ended drivers and receivers.
The DS2107A SCSI Terminator, which is fully compliant
with the standard, enables the designer to ...
