18-BIT BUS-INTERFACE FLIP-FLOPS WITH 3-STATE OUTPUTS

These 18-bit bus-interface Flip-Flops SN54ABT162823 SN74ABT162823 feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing wider Buffer Registers I/O ports, bidirectional bus drivers with parity, and working Registers The ABT162823 CAN be used as two 9-bit Flip-Flops or one 18-bit Flip-Flop With the clock-enable (CLKEN) input low, the D-type Flip-Flops enter data on the low-to-high transitions of the Clock Taking CLKEN high disables the Clock Buffer thus latching the outputs. Taking the clear (CLR) input low causes the Q outputs to go low independently of the Clock A buffered output-enable (OE) input places the nine outputs in either a normal Logic state (high or low Logic level) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without Interface or pullup components. OE does not affect the internal operation of the Flip-Flops Old data CAN be retained or new data CAN be entered while the outputs are in the high-impedance state. The outputs, which are designed to source or sink up to 12 mA, include equivalent 25- series resistors to reduce overshoot and undershoot. By Texas Instruments
SN54ABT162823 's PackagesSN54ABT162823 's pdf datasheet
SN74ABT162823




SN54ABT162823 Pinout, Pinouts
SN54ABT162823 pinout,Pin out
This is one package pinout of SN54ABT162823,If you need more pinouts please download SN54ABT162823's pdf datasheet.

SN54ABT162823 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN54ABT162823 Pb-Free SN54ABT162823 Cross Reference SN54ABT162823 Schematic SN54ABT162823 Distributor
SN54ABT162823 Application Notes SN54ABT162823 RoHS SN54ABT162823 Circuits SN54ABT162823 footprint
Hot categories