10-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTSThese 10-bit Buffers or bus drivers provide a
high-performance bus Interface for wide data
paths or buses carrying parity.
The 3-state control Gate is a 2-input AND Gate with
active-low inputs so that, if either output-enable
(OE1 or OE2) input is high, all ten outputs are in
the high-impedance state. The ABT827 provides
true data at the outputs.
When VCC is between 0 and 2.1 V, the device
is in the high-impedance state during power up
or power down. However, to ensure
the high-impedance state above 2.1 V, OE should
be tied to VCC through a pullup resistor; the
minimum value of the resistor is determined by
the current-sinking capability of the driver.
The SN54ABT827 is characterized for operation over the full military temperature range of 55C to 125C. The
SN74ABT827 is characterized for operation from 40C to 85C. By Texas Instruments
|
|
SN54ABT827 Pb-Free | SN54ABT827 Cross Reference | SN54ABT827 Schematic | SN54ABT827 Distributor |
SN54ABT827 Application Notes | SN54ABT827 RoHS | SN54ABT827 Circuits | SN54ABT827 footprint |