16-BIT INCIDENT-WAVE SWITCHING BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

The ABTE16245 devices are 16-bit (dual-octal) noninverting 3-state transceivers designed for synchronous two-way Communication between data buses. The control-function implementation minimizes external Timing requirements. These devices CAN be used as two 8-bit transceivers or one 16-bit transceiver. They allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the Logic level at the direction-control (DIR) input. The output-enable (OE) input CAN be used to disable the device so that the buses are effectively isolated. When OE is low, the device is active. The B port has an equivalent 25- series output resistor to reduce ringing. Active bus-hold inputs also are on the B port to hold unused or floating inputs at a valid Logic level. The A port provides for the precharging of the outputs via VCCBIAS, which establishes a voltage between 1.3 V and 1.7 V when VCC is not connected. Active bus-hold circuitry holds unused or undriven inputs at a valid Logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended. By Texas Instruments
SN54ABTE16245 's PackagesSN54ABTE16245 's pdf datasheet
ABTE16245




SN54ABTE16245 Pinout, Pinouts
SN54ABTE16245 pinout,Pin out
This is one package pinout of SN54ABTE16245,If you need more pinouts please download SN54ABTE16245's pdf datasheet.

SN54ABTE16245 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN54ABTE16245 Pb-Free SN54ABTE16245 Cross Reference SN54ABTE16245 Schematic SN54ABTE16245 Distributor
SN54ABTE16245 Application Notes SN54ABTE16245 RoHS SN54ABTE16245 Circuits SN54ABTE16245 footprint
Hot categories