18-BIT BUS-INTERFACE FLIP-FLOPS WITH 3-STATE OUTPUTS

These 18-bit Flip-Flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing wider Buffer Registers I/O ports, bidirectional bus drivers with parity, and working Registers The ABTH16823 CAN be used as two 9-bit Flip-Flops or one 18-bit Flip-Flop With the clock-enable (CLKEN) input low, the D-type Flip-Flops enter data on the low-to-high transitions of the Clock Taking CLKEN high disables the Clock Buffer latching the outputs. Taking the clear (CLR) input low causes the Q outputs to go low independently of the Clock A buffered output-enable (OE) input CAN be used to place the nine outputs in either a normal Logic state (high or low Logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for Interface or pullup components. OE does not affect the internal operation of the Flip-Flops Old data CAN be retained or new data CAN be entered while the outputs are in the high-impedance state. By Texas Instruments
SN54ABTH16823 's PackagesSN54ABTH16823 's pdf datasheet



SN54ABTH16823 Pinout, Pinouts
SN54ABTH16823 pinout,Pin out
This is one package pinout of SN54ABTH16823,If you need more pinouts please download SN54ABTH16823's pdf datasheet.

SN54ABTH16823 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN54ABTH16823 Pb-Free SN54ABTH16823 Cross Reference SN54ABTH16823 Schematic SN54ABTH16823 Distributor
SN54ABTH16823 Application Notes SN54ABTH16823 RoHS SN54ABTH16823 Circuits SN54ABTH16823 footprint
Hot categories