OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS

The AHC573 devices are octal transparent D-type Latches designed for 2-V to 5.5-V VCC operation. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is low, the Q outputs are latched at the Logic levels of the D inputs. A buffered output-enable (OE) input CAN be used to place the eight outputs in either a normal Logic state (high or low) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without Interface or pullup components. OE does not affect the internal operations of the Latches Old data CAN be retained or new data CAN be entered while the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. By Texas Instruments
SN54AHC573 's PackagesSN54AHC573 's pdf datasheet
SNJ54AHC573FK CFP
SNJ54AHC573J
SNJ54AHC573W




SN54AHC573 Pinout, Pinouts
SN54AHC573 pinout,Pin out
This is one package pinout of SN54AHC573,If you need more pinouts please download SN54AHC573's pdf datasheet.

SN54AHC573 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN54AHC573 Pb-Free SN54AHC573 Cross Reference SN54AHC573 Schematic SN54AHC573 Distributor
SN54AHC573 Application Notes SN54AHC573 RoHS SN54AHC573 Circuits SN54AHC573 footprint
Hot categories