OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

The AHCT374 devices are octal edge-triggered D-type Flip-Flops that feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. This device is particularly suitable for implementing Buffer Registers I/O ports, bidirectional bus drivers, and working Registers On the positive transition of the Clock (CLK) input, the Q outputs are set to the Logic levels of the data (D) inputs. A buffered output-enable (OE) input CAN be used to place the eight outputs in either a normal Logic state (high or low Logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and the increased drive provide the capability to drive bus lines without Interface or pullup components. By Texas Instruments
SN54AHCT374 's PackagesSN54AHCT374 's pdf datasheet
SNJ54AHCT374FK LCCC
SNJ54AHCT374J DIP
SNJ54AHCT374W CFP
AHCT374




SN54AHCT374 Pinout, Pinouts
SN54AHCT374 pinout,Pin out
This is one package pinout of SN54AHCT374,If you need more pinouts please download SN54AHCT374's pdf datasheet.

SN54AHCT374 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN54AHCT374 Pb-Free SN54AHCT374 Cross Reference SN54AHCT374 Schematic SN54AHCT374 Distributor
SN54AHCT374 Application Notes SN54AHCT374 RoHS SN54AHCT374 Circuits SN54AHCT374 footprint
Hot categories