OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS

These 8-bit Flip-Flops SN54HC374 SN74HC374 feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing Buffer Registers I/O ports, bidirectional bus drivers, and working Registers The eight Flip-Flops of the HC374 devices are edge-triggered D-type Flip-Flops On the positive transition of the Clock (CLK) input, the Q outputs are set to the Logic levels that were set up at the data (D) inputs. An output-enable (OE) input places the eight outputs in either a normal Logic state (high or low Logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without Interface or pullup components. OE does not affect the internal operations of the Flip-Flops Old data CAN be retained or new data CAN be entered while the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN54HC374 is characterized for operation over the full military temperature range of 55C to 125C. The SN74HC374 is characterized for operation from 40C to 85C. By Texas Instruments
Part Manufacturer Description Datasheet Samples
SN54HC374FK Texas Instruments HC/UH SERIES, 8-BIT DRIVER, TRUE OUTPUT, CQCC20, CERAMIC, CC-20
SN54HC374J Texas Instruments Octal D-type Edge-Triggered Flip-Flops With 3-State Outputs 20-CDIP -55 to 125
SN54HC374W Texas Instruments HC/UH SERIES, 8-BIT DRIVER, TRUE OUTPUT, CDFP20, CERAMIC, FP-20
SN54HC374FK-00 Texas Instruments HC/UH SERIES, 8-BIT DRIVER, TRUE OUTPUT, CQCC20
SN54HC374FKR Texas Instruments HC/UH SERIES, 8-BIT DRIVER, TRUE OUTPUT, CQCC20, CERAMIC, LCC-20
SN54HC374J-00 Texas Instruments HC/UH SERIES, 8-BIT DRIVER, TRUE OUTPUT, CDIP20
SN54HC374WR Texas Instruments HC/UH SERIES, 8-BIT DRIVER, TRUE OUTPUT, CDFP20, CERAMIC, FP-20
JM38510/65602BRA Texas Instruments Octal D-type Edge-Triggered Flip-Flops With 3-State Outputs 20-CDIP -55 to 125
SNJ54HC374W Texas Instruments Octal D-type Edge-Triggered Flip-Flops With 3-State Outputs 20-CFP -55 to 125
8407101SA Texas Instruments Octal D-type Edge-Triggered Flip-Flops With 3-State Outputs 20-CFP -55 to 125
SN54HC374 's PackagesSN54HC374 's pdf datasheet



SN54HC374 Pinout, Pinouts
SN54HC374 pinout,Pin out
This is one package pinout of SN54HC374,If you need more pinouts please download SN54HC374's pdf datasheet.

SN54HC374 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN54HC374 Pb-Free SN54HC374 Cross Reference SN54HC374 Schematic SN54HC374 Distributor
SN54HC374 Application Notes SN54HC374 RoHS SN54HC374 Circuits SN54HC374 footprint
Hot categories