3.3-V ABT 16-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTSThe LVT16646 are 16-bit Bus Transceivers SN54LVT16646 SN74LVT16646 designed for low-voltage (3.3-V) VCC operation, but with the
capability to provide a TTL Interface to a 5-V system environment.
These devices CAN be used as two 8-bit transceivers or one 16-bit transceiver. Data on the A or B bus is clocked
into the Registers on the low-to-high transition of the appropriate Clock (CLKAB or CLKBA) input. Figure 1
illustrates the four fundamental bus-management functions that CAN be performed with the LVT16646.
Output-enable (OE) and direction-control (DIR) inputs are provided to control the transceiver functions. In the
transceiver mode, data present at the high-impedance port may be stored in either Register or in both. The
select-control (SAB and SBA) inputs CAN multiplex stored and real-time (transparent mode) data. The circuitry
used for select control eliminates the typical decoding glitch that occurs in a multiplexer during the transition
between stored and real-time data. The direction control (DIR) determines which bus receives data when OE
is low. In the isolation mode (OE high), A data may be stored in one Register and/or B data may be stored in the
other Register By Texas Instruments
|
|
SN54LVT16646 Pb-Free | SN54LVT16646 Cross Reference | SN54LVT16646 Schematic | SN54LVT16646 Distributor |
SN54LVT16646 Application Notes | SN54LVT16646 RoHS | SN54LVT16646 Circuits | SN54LVT16646 footprint |