These octal transceivers SN54LVT543 SN74LVT543 are designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL Interface to a 5-V system environment. The LVT543 contain two sets of D-type Latches for temporary storage of data flowing in either direction. Separate latch-enable (LEAB or LEBA) and output-enable (OEAB or OEBA) inputs are provided for each Register to permit independent control in either direction of data flow. The A-to-B enable (CEAB) input must be low in order to enter data from A or to output data from B. If CEAB is low and LEAB is low, the A-to-B Latches are transparent; a subsequent low-to-high transition of LEAB puts the A Latches in the storage mode. With CEAB and OEAB both low, the 3-state B outputs are active and reflect the data present at the output of the A Latches Data flow from B to A is similar but requires using the CEBA, LEBA, and OEBA inputs. Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid Logic level By Texas Instruments
SN54LVT543 's PackagesSN54LVT543 's pdf datasheet

SN54LVT543 Pinout, Pinouts
SN54LVT543 pinout,Pin out
This is one package pinout of SN54LVT543,If you need more pinouts please download SN54LVT543's pdf datasheet.

SN54LVT543 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN54LVT543 Pb-Free SN54LVT543 Cross Reference SN54LVT543 Schematic SN54LVT543 Distributor
SN54LVT543 Application Notes SN54LVT543 RoHS SN54LVT543 Circuits SN54LVT543 footprint
Hot categories