3.3-V ABT 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTSThe LVTH16244A are 16-bit Buffers and Line Drivers SN54LVTH16244A SN74LVTH16244A designed for low-voltage (3.3-V) VCC operation, but with
the capability to provide a TTL Interface to a 5-V system environment. These devices CAN be used as four 4-bit
Buffers two 8-bit Buffers or one 16-bit Buffer These devices provide true outputs and symmetrical active-low
output-enable (OE) inputs.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid Logic level.
When VCC is between 0 and 1.5-V, the devices are in the high-impedance state during power up or power down.
However, to ensure the high-impedance state above 1.5-V, OE should be tied to VCC through a pullup resistor;
the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN74LVTH16244A is available in TIs shrink small-outline (DL) and thin shrink small-outline (DGG)
packages, which provide twice the I/O pin count and functionality of standard small-outline packages in the
same printed circuit board area. By Texas Instruments
|
|
SN54LVTH16244A Pb-Free | SN54LVTH16244A Cross Reference | SN54LVTH16244A Schematic | SN54LVTH16244A Distributor |
SN54LVTH16244A Application Notes | SN54LVTH16244A RoHS | SN54LVTH16244A Circuits | SN54LVTH16244A footprint |