3.3-V ABT 18-BIT UNIVERSAL BUS DRIVERS WITH 3-STATE OUTPUTS

The LVTH16835 devices SN54LVTH16835 SN74LVTH16835 are 18-bit universal bus drivers designed for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL Interface to a 5-V system environment. Data flow from A to Y is controlled by the output-enable (OE) input. These devices operate in the transparent mode when the latch-enable (LE) input is high. The A data is latched if the Clock (CLK) input is held at a high or low Logic level. If LE is low, the A data is stored in the latch Flip-Flop on the low-to-high transition of the Clock When OE is high, the outputs are in the high-impedance state. Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid Logic level. When VCC is between 0 and 1.5 V, the devices are in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver By Texas Instruments
SN54LVTH16835 's PackagesSN54LVTH16835 's pdf datasheet



SN54LVTH16835 Pinout, Pinouts
SN54LVTH16835 pinout,Pin out
This is one package pinout of SN54LVTH16835,If you need more pinouts please download SN54LVTH16835's pdf datasheet.

SN54LVTH16835 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN54LVTH16835 Pb-Free SN54LVTH16835 Cross Reference SN54LVTH16835 Schematic SN54LVTH16835 Distributor
SN54LVTH16835 Application Notes SN54LVTH16835 RoHS SN54LVTH16835 Circuits SN54LVTH16835 footprint