3.3-V ABT 16-BIT REGISTERED TRANSCEIVERS WITH 3-STATE OUTPUTS

The LVTH16952 devices SN54LVTH16952 SN74LVTH16952 are 16-bit registered transceivers designed for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL Interface to a 5-V system environment. These devices CAN be used as two 8-bit transceivers or one 16-bit transceiver. Data on the A or B bus is stored in the Registers on the low-to-high transition of the Clock (CLKAB or CLKBA) input, provided that the clock-enable (CLKENAB or CLKENBA) input is low. Taking the output-enable (OEAB or OEBA) input low accesses the data on either port. Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid Logic level. When VCC is between 0 and 1.5 V, the devices are in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. By Texas Instruments
SN54LVTH16952 's PackagesSN54LVTH16952 's pdf datasheet



SN54LVTH16952 Pinout, Pinouts
SN54LVTH16952 pinout,Pin out
This is one package pinout of SN54LVTH16952,If you need more pinouts please download SN54LVTH16952's pdf datasheet.

SN54LVTH16952 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN54LVTH16952 Pb-Free SN54LVTH16952 Cross Reference SN54LVTH16952 Schematic SN54LVTH16952 Distributor
SN54LVTH16952 Application Notes SN54LVTH16952 RoHS SN54LVTH16952 Circuits SN54LVTH16952 footprint