3.3-V ABT SCAN TEST DEVICES WITH 18-BIT UNIVERSAL BUS TRANSCEIVERS

The LVTH18502A and LVTH182502A scan test devices with 18-bit universal Bus Transceivers SN54LVTH18502A SN54LVTH182502A SN74LVTH18502A SN74LVTH182502A are members of the Texas Instruments SCOPE testability integrated-circuit family. This family of devices supports IEEE Standard 1149.1-1990 boundary scan to facilitate testing of complex circuit-board assemblies. Scan access to the test circuitry is accomplished via the 4-wire test access port (TAP) Interface Additionally, these devices are designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL Interface to a 5-V system environment. In the normal mode, these devices are 18-bit universal Bus Transceivers that combine D-type Latches and D-type Flip-Flops to allow data flow in transparent, latched, or clocked modes. They CAN be used either as two 9-bit transceivers or one 18-bit transceiver. The test circuitry CAN be activated by the TAP to take snapshot samples of the data appearing at the device pins or to perform a self test on the boundary-test cells. Activating the TAP in the normal mode does not affect the functional operation of the SCOPE universal Bus Transceivers Data flow in each direction is controlled by output-enable (OEAB and OEBA), latch-enable (LEAB and LEBA), and Clock (CLKAB and CLKBA) inputs. For A-to-B data flow, the device operates in the transparent mode when LEAB is high. When LEAB is low, the A-bus data is latched while CLKAB is held at a static low or high Logic level. Otherwise, if LEAB is low, A-bus data is stored on a low-to-high transition of CLKAB. When OEAB is low, the B outputs are active. When OEAB is high, the B outputs are in the high-impedance state. B-to-A data flow is similar to A-to-B data flow, but uses the OEBA, LEBA, and CLKBA inputs. In the test mode, the normal operation of the SCOPE universal Bus Transceivers is inhibited, and the test circuitry is enabled to observe and control the I/O boundary of the device. When enabled, the test circuitry performs boundary-scan test operations according to the protocol described in IEEE Standard 1149.1-1990. By Texas Instruments
SN54LVTH182502A 's PackagesSN54LVTH182502A 's pdf datasheet
SN54LVTH18502A




SN54LVTH182502A Pinout, Pinouts
SN54LVTH182502A pinout,Pin out
This is one package pinout of SN54LVTH182502A,If you need more pinouts please download SN54LVTH182502A's pdf datasheet.

SN54LVTH182502A circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN54LVTH182502A Pb-Free SN54LVTH182502A Cross Reference SN54LVTH182502A Schematic SN54LVTH182502A Distributor
SN54LVTH182502A Application Notes SN54LVTH182502A RoHS SN54LVTH182502A Circuits SN54LVTH182502A footprint
Hot categories