These devices are designed for asynchronous Communication between data buses. They transmit data from the A bus to the B bus or from the B bus to the A bus, depending on the Logic level at the direction-control (DIR) input. The output-enable (OE) input CAN be used to disable the devices so the buses are effectively isolated. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid Logic level. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended. These devices are fully specified for hot-insertion applications using Ioff and power-up 3-state. The Ioff circuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict. By Texas Instruments
SN54LVTH245A 's PackagesSN54LVTH245A 's pdf datasheet

SN54LVTH245A Pinout, Pinouts
SN54LVTH245A pinout,Pin out
This is one package pinout of SN54LVTH245A,If you need more pinouts please download SN54LVTH245A's pdf datasheet.

SN54LVTH245A circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN54LVTH245A Pb-Free SN54LVTH245A Cross Reference SN54LVTH245A Schematic SN54LVTH245A Distributor
SN54LVTH245A Application Notes SN54LVTH245A RoHS SN54LVTH245A Circuits SN54LVTH245A footprint
Hot categories