Differential Bus Transceiver
The SN65176B and SN75176B differential Bus Transceivers are integrated circuits designed for bidirectional data Communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.
The SN65176B and SN75176B combine a 3-state differential Line Driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that CAN be connected together externally to function as a direction control. The driver differential outputs and the receiver differential inputs are connected internally to form differential input/output (I/O) bus ports that are designed to offer minimum loading to the bus when the driver is disabled or VCC = 0. These ports feature wide positive and negative common-mode voltage ranges, making the device suitable for party-line applications.
The driver is designed for up to 60 mA of sink or source current. The driver features positive and negative current limiting and thermal shutdown for protection from line-fault conditions. Thermal shutdown is designed to occur at a junction temperature of approximately 150C. The receiver features a minimum input impedance of 12 k, an input sensitivity of 200 mV, and a typical input hysteresis of 50 mV.
The SN65176B and SN75176B CAN be used in transmission-line applications employing the SN75172 and SN75174 quadruple differential Line Drivers and SN75173 and SN75175 quadruple differential line receivers.
By Texas Instruments
|SN65176B Pb-Free||SN65176B Cross Reference||SN65176B Schematic||SN65176B Distributor|
|SN65176B Application Notes||SN65176B RoHS||SN65176B Circuits||SN65176B footprint|