Extended Common-mode RS-485 Transceiver
The transceivers in the HVD2x family offer performance far exceeding typical RS-485 devices. In addition to meeting all requirements of the TIA/EIA-485-A standard, the HVD2x family operates over an extended range of common-mode voltage, and has features such as high ESD protection, wide receiver hysteresis, and failsafe operation. This family of devices is ideally suited for long-cable networks, and other applications where the environment is too harsh for ordinary transceivers.
These devices are designed for bidirectional data transmission on multipoint twisted-pair cables. Example applications are digital Motor Controllers remote Sensors and terminals, industrial process control, security stations, and environmental control systems.
These devices combine a 3-state differential driver and a differential receiver, which operate from a single 5-V power supply. The driver differential outputs and the receiver differential inputs are connected internally to form a differential bus port that offers minimum loading to the bus. This port features an extended common-mode voltage range making the device suitable for multipoint applications over long cable runs.
The ?HVD20 provides high signaling rate (up to 25 Mbps) for interconnecting networks of up to 64 nodes.
The ?HVD21 allows up to 256 connected nodes at moderate data rates (up to 5 Mbps). The driver output slew rate is controlled to provide reliable switching with shaped transitions which reduce high-frequency noise emissions.
The ?HVD22 has controlled driver output slew rate for low radiated noise in emission-sensitive applications and for improved signal quality with long stubs. Up to 256 ?HVD22 nodes CAN be connected at signaling rates up to 500 kbps.
The ?HVD23 implements receiver equalization technology for improved jitter performance on differential bus applications with data rates up to 25 Mbps at cable lengths up to 160 meters.
The ?HVD24 implements receiver equalization technology for improved jitter performance on differential bus applications with data rates in the range of 1 Mbps to 10 Mbps at cable lengths up to 1000 meters.
The receivers also include a failsafe circuit that will provide a high-level output within 250 microseconds after loss of the input signal. The most common causes of signal loss are disconnected cables, shorted lines, or the absence of any active transmitters on the bus. This feature prevents noise from being received as valid data under these fault conditions. This feature may also be used for Wired-Or bus signaling.
The SN65HVD2X devices are characterized for operation over the temperature range of ?40C to 85C.
By Texas Instruments
|SN65HVD21DG4||Texas Instruments||Extended Common-mode RS-485 Transceiver 8-SOIC -40 to 85|
|SN65HVD21MDREP||Texas Instruments||Enhanced Product Extended Common-Mode Rs-485 Transceivers 8-SOIC -55 to 125|
|SN65HVD21D||Texas Instruments||Extended Common-mode RS-485 Transceiver 8-SOIC -40 to 85|
|SN65HVD21DRG4||Texas Instruments||Extended Common-mode RS-485 Transceiver 8-SOIC -40 to 85|
|SN65HVD21MDREPG4||Texas Instruments||Enhanced Product Extended Common-Mode Rs-485 Transceivers 8-SOIC -55 to 125|
|SN65HVD21P||Texas Instruments||Extended Common-mode RS-485 Transceiver 8-PDIP -40 to 85|
|SN65HVD21ADR||Texas Instruments||Extended Common-Mode RS-485 Transceiver 8-SOIC -40 to 85|
|SN65HVD21DR||Texas Instruments||Extended Common-mode RS-485 Transceiver 8-SOIC -40 to 85|
|SN65HVD21AD||Texas Instruments||Extended Common-Mode RS-485 Transceiver 8-SOIC -40 to 85|
|SN65HVD21PE4||Texas Instruments||Extended Common-mode RS-485 Transceiver 8-PDIP -40 to 85|
|SN65HVD21 Pb-Free||SN65HVD21 Cross Reference||SN65HVD21 Schematic||SN65HVD21 Distributor|
|SN65HVD21 Application Notes||SN65HVD21 RoHS||SN65HVD21 Circuits||SN65HVD21 footprint|