The SN65HVDA195 is the Local Interconnect Network (LIN) physical Interface and MOST ECL Interface which integrates the serial transceiver with wake-up and protection features. The bus is a single-wire bidirectional bus typically used for low-speed in-vehicle networks using data rates to 20 kbps. The device CAN transmit with an effective data rate of 0 kbps since it does not have dominant state time out. The protocol output data stream on TXD is converted by the SN65HVDA195 into the bus signal through a current-limited wave-shaping driver as outlined by the LIN Physical Layer Specification Revision 2.0. The receiver converts the data stream from the bus and outputs the data stream via RXD. The bus has two states: dominant state (voltage near ground) and the recessive state (voltage near battery). In the recessive state, the bus is pulled high by the SN65HVDA195’s internal pullup resistor and series Diode so no external pullup components are required for slave applications. Master applications require an external pullup resistor (1 kΩ) plus a series Diode per the LIN specification. By Texas Instruments
Part Manufacturer Description Datasheet Samples
SN65HVDA195QDRQ1 Texas Instruments Automotive Catalog LIN, MOST ECL, and K-Line Physical Interface 8-SOIC -40 to 125
SN65HVDA195-Q1 's PackagesSN65HVDA195-Q1 's pdf datasheet

SN65HVDA195-Q1 Pinout, Pinouts
SN65HVDA195-Q1 pinout,Pin out
This is one package pinout of SN65HVDA195-Q1,If you need more pinouts please download SN65HVDA195-Q1's pdf datasheet.

SN65HVDA195-Q1 Application circuits
SN65HVDA195-Q1 circuits
This is one application circuit of SN65HVDA195-Q1,If you need more circuits,please download SN65HVDA195-Q1's pdf datasheet.

Related Electronics Part Number

Related Keywords:

SN65HVDA195-Q1 Pb-Free SN65HVDA195-Q1 Cross Reference SN65HVDA195-Q1 Schematic SN65HVDA195-Q1 Distributor
SN65HVDA195-Q1 Application Notes SN65HVDA195-Q1 RoHS SN65HVDA195-Q1 Circuits SN65HVDA195-Q1 footprint
Hot categories