2.7V Dual LVDS Transmitter/Receiver
The SN65LVDS1050 is similar to the SN65LVDS050 except that it is characterized for operation with a lower supply voltage range and packaged in the thin shrink outline package for portable battery-powered applications.
The differential Line Drivers and receivers use low-voltage differential signaling (LVDS) to achieve signaling rates as high as 400 Mbps. The drivers provide a minimum differential output voltage magnitude of 247 mV into a 100- load and receipt of 100-mV signals with up to 1 V of ground potential difference between a transmitter and receiver.
The intended application of this device and signaling technique is for point-to-point baseband data transmission over controlled impedance media of approximately 100- characteristic impedance. The transmission media may be printed-circuit 805 board traces, Backplanes or cables. Note: The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media, the noise coupling to the environment and other application-specific characteristics.
The SN65LVDS1050 is characterized for operation from ?40C to 85C.
By Texas Instruments
|SN65LVDS1050PWG4||Texas Instruments||2.7V Dual LVDS Transmitter/Receiver 16-TSSOP -40 to 85|
|SN65LVDS1050PWR||Texas Instruments||2.7V Dual LVDS Transmitter/Receiver 16-TSSOP -40 to 85|
|SN65LVDS1050PW||Texas Instruments||2.7V Dual LVDS Transmitter/Receiver 16-TSSOP -40 to 85|
|SN65LVDS1050PWRG4||Texas Instruments||DUAL LINE TRANSCEIVER, PDSO16, GREEN, PLASTIC, TSSOP-16|
|SN65LVDS1050 Pb-Free||SN65LVDS1050 Cross Reference||SN65LVDS1050 Schematic||SN65LVDS1050 Distributor|
|SN65LVDS1050 Application Notes||SN65LVDS1050 RoHS||SN65LVDS1050 Circuits||SN65LVDS1050 footprint|