Dual LVDS Receiver With -4 To 5V Common-mode Range

This family of four LVDs data line receivers offers the widest common-mode input voltage range in the industry. These receivers provide an input voltage range specification compatible with a 5-V PECL signal as well as an overall increased ground-noise tolerance. They are in industry standard footprints with integrated termination as an option.
Precise control of the differential input voltage thresholds allows for inclusion of 50 mV of input voltage hysteresis to improve noise rejection on slowly changing input signals. The input thresholds are still no more than 50 mV over the full input common-mode voltage range.
The high-speed switching of LVDs signals usually necessitates the use of a line impedance matching resistor at the receiving-end of the cable or transmission media. The SN65LVDT series of receivers eliminates this external resistor by integrating it with the receiver. The nonterminated SN65LVDS series is also available for multidrop or other termination circuits.
The receivers CAN withstand 15 kV human-body model (HBM) and 600 V machine model (MM) electrostatic discharges to the receiver input pins with respect to ground without damage. This provides reliability in cabled and other connections where potentially damaging noise is always a threat.
The receivers also include a (patent pending) failsafe circuit that will provide a high-level output within 600 ns after loss of the input signal. The most common causes of signal loss are disconnected cables, shorted lines, or powered-down transmitters. The failsafe circuit prevents noise from being received as valid data under these fault conditions. This feature may also be used for Wired-Or bus signaling. See The Active Failsafe Feature of the SN65LVDS32B application note.
The intended application and signaling technique of these devices is point-to-point baseband data transmission over controlled impedance media of approximately 100 . The transmission media may be printed-circuit board traces, Backplanes or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.
The SN65LVDS33 SN65LVDT33 SN65LVDS34 and SN65LVDT34 are characterized for operation from ?40C to 85C.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
SN65LVDS34D Texas Instruments Quad LVDS receiver with -4- to 5-V common-mode range 8-SOIC -40 to 85
SN65LVDS348PWR Texas Instruments Quad LVDS Receiver with -4 to 5V Common-mode Range 16-TSSOP -40 to 85
SN65LVDS3486BDR Texas Instruments Quad LVDS Receiver with -2 to 4.4V Common-mode Range 16-SOIC -40 to 85
SN65LVDS34DRG4 Texas Instruments Quad LVDS receiver with -4- to 5-V common-mode range 8-SOIC -40 to 85
SN65LVDS3486DG4 Texas Instruments Quad LVDS Receiver 16-SOIC -40 to 85
SN65LVDS3487DG4 Texas Instruments Quad LVDS Driver 16-SOIC -40 to 85
SN65LVDS348D Texas Instruments Quad LVDS Receiver with -4 to 5V Common-mode Range 16-SOIC -40 to 85
SN65LVDS3486DR Texas Instruments Quad LVDS Receiver 16-SOIC -40 to 85
SN65LVDS3487DR Texas Instruments Quad LVDS Driver 16-SOIC -40 to 85
SN65LVDS348PW Texas Instruments Quad LVDS Receiver with -4 to 5V Common-mode Range 16-TSSOP -40 to 85
SN65LVDS34 's PackagesSN65LVDS34 's pdf datasheet
SN65LVDS34D SOIC
SN65LVDS34DG4 SOIC
SN65LVDS34DR SOIC
SN65LVDS34DRG4 SOIC




SN65LVDS34 Pinout, Pinouts
SN65LVDS34 pinout,Pin out
This is one package pinout of SN65LVDS34,If you need more pinouts please download SN65LVDS34's pdf datasheet.

SN65LVDS34 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN65LVDS34 Pb-Free SN65LVDS34 Cross Reference SN65LVDS34 Schematic SN65LVDS34 Distributor
SN65LVDS34 Application Notes SN65LVDS34 RoHS SN65LVDS34 Circuits SN65LVDS34 footprint
Hot categories