Dual LVDS Receiver,SNx5LVDS32, SN65LVDS3486, SN65LVDS9637 High-Speed Differential Line Receivers
The SN55LVDS32 SN65LVDS32 SN65LVDS3486 and SN65LVDS9637 are differential line receivers that implement the electrical characteristics of low-voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5-V differential standard levels (such as EIA/TIA-422B) to reduce the power, increase the switching speeds, and allow operation with a 3.3-V supply rail. Any of the four differential receivers provides a valid logical output state with a 100-mV differential input voltage within the input common-mode voltage range. The input common-mode voltage range allows 1 V of ground potential difference between two LVDs nodes.
The intended application of these devices and signaling technique is both point-to-point and multidrop (one driver and multiple receivers) data transmission over controlled impedance media of approximately 100 . The transmission media may be printed-circuit board traces, Backplanes or cables. The ultimate rate and distance ofdata transfer depends on the attenuation characteristics of the media and the noise coupling to the environment.
The SN65LVDS32 SN65LVDS3486 and SN65LVDS9637 are characterized for operation from -40C to 85C. The SN55LVDS32 is characterized for operation from -55C to 125C.
By Texas Instruments
|SN65LVDS9637 Pb-Free||SN65LVDS9637 Cross Reference||SN65LVDS9637 Schematic||SN65LVDS9637 Distributor|
|SN65LVDS9637 Application Notes||SN65LVDS9637 RoHS||SN65LVDS9637 Circuits||SN65LVDS9637 footprint|