Scan Test Devices With 18-Bit Inverting Bus Transceivers
The ABT18640 scan test devices with 18-bit inverting Bus Transceivers are members of the Texas Instruments SCOPETM testability integrated-circuit family. This family of devices supports IEEE Standard 1149.1-1990 boundary scan to facilitate testing of complex circuit-board assemblies. Scan access to the test circuitry is accomplished via the 4-wire test access port (TAP) Interface
In the normal mode, these devices are 18-bit inverting Bus Transceivers They CAN be used either as two 9-bit transceivers or one 18-bit transceiver. The test circuitry CAN be activated by the TAP to take snapshot samples of the data appearing at the device pins or to perform a self test on the boundary-test cells. Activating the TAP in the normal mode does not affect the functional operation of the SCOPETM Bus Transceivers
Data flow is controlled by the direction-control (DIR) and output-enable () inputs. Data transmission is allowed from the A bus to the B bus or from the B bus to the A bus, depending on the Logic level at DIR. CAN be used to disable the device so that the buses are effectively isolated.
In the test mode, the normal operation of the SCOPETM Bus Transceivers is inhibited and the test circuitry is enabled to observe and control the I/O boundary of the device. When enabled, the test circuitry CAN perform boundary-scan test operations according to the protocol described in IEEE Standard 1149.1-1990.
Four dedicated test pins observe and control the operation of the test circuitry: test data input (TDI), test data output (TDO), test mode select (TMS), and test Clock (TCK). Additionally, the test circuitry performs other testing functions such as parallel-signature analysis (PSA) on data inputs and pseudo-random pattern generation (PRPG) from data outputs. All testing and scan operations are synchronized to the TAP Interface
The SN74ABT18640 is available in TI's shrink small-outline (DL) and thin shrink small-outline (DGG) packages, which provide twice the I/O pin count and functionality of standard small-outline packages in the same printed-circuit-board area.
The SN54ABT18640 is characterized for operation over the full military temperature range of -55?C to 125?C. The SN74ABT18640 is characterized for operation from -40?C to 85?C.
By Texas Instruments
|SN74ABT18640DL||Texas Instruments||Scan Test Devices With 18-Bit Inverting Bus Transceivers 56-SSOP -40 to 85|
|SN74ABT18640DGGR||Texas Instruments||IC ABT SERIES, DUAL 9-BIT BOUNDARY SCAN TRANSCEIVER, INVERTED OUTPUT, PDSO56, GREEN, PLASTIC, TSSOP-56, Bus Driver/Transceiver|
|SN74ABT18640DLG4||Texas Instruments||Scan Test Devices With 18-Bit Inverting Bus Transceivers 56-SSOP -40 to 85|
|SN74ABT18640DLRG4||Texas Instruments||IC ABT SERIES, DUAL 9-BIT BOUNDARY SCAN TRANSCEIVER, INVERTED OUTPUT, PDSO56, GREEN, PLASTIC, SSOP-56, Bus Driver/Transceiver|
|SN74ABT18640DLR||Texas Instruments||IC ABT SERIES, DUAL 9-BIT BOUNDARY SCAN TRANSCEIVER, INVERTED OUTPUT, PDSO56, GREEN, PLASTIC, SSOP-56, Bus Driver/Transceiver|
|SN74ABT18640 Pb-Free||SN74ABT18640 Cross Reference||SN74ABT18640 Schematic||SN74ABT18640 Distributor|
|SN74ABT18640 Application Notes||SN74ABT18640 RoHS||SN74ABT18640 Circuits||SN74ABT18640 footprint|