64 X 18 Asynchronous FIFO Memory

A FIFO memory is a storage device that allows data to be written into and read from its array at independent data rates. The SN74ACT7814 is a 64-word by 18-bit FIFO for high speed and fast access times. It processes data at rates up to 50 MHz and access times of 15 ns in a bit-parallel format.
Data is written into memory on a low-to-high transition at the load Clock (LDCK) input and is read out on a low-to-high transition at the unload Clock (UNCK) input. The memory is full when the number of words clocked in exceeds the number of words clocked out by 64. When the memory is full, LDCK signals have no effect on the data residing in memory. When the memory is empty, UNCK signals have no effect.
Status of the FIFO memory is monitored by the full (FULL), empty (EMPTY), half-full (HF), and almost-full/almost-empty (AF/AE) flags. The FULL output is low when the memory is full and high when the memory is not full. The EMPTY output is low when the memory is empty and high when it is not empty. The HF output is high when the FIFO contains 32 or more words and is low when it contains 31 or fewer words. The AF/AE status flag is a programmable flag. The first one or two low-to-high transitions of LDCK after reset are used to program the almost-empty offset value (X) and the almost-full offset value (Y) if program enable (PEN) is low. The AF/AE flag is high when the FIFO contains X or fewer words or (64 - Y) or more words. The AF/AE flag is low when the FIFO contains between (X + 1) and (63 - Y) words.
A low level on the reset (RESET) input resets the internal stack pointers and sets FULL high, HF low, and EMPTY low. The Q outputs are not reset to any specific Logic level. The FIFO must be reset upon power up. The first word loaded into empty memory causes EMPTY to go high and the data to appear on the Q outputs. It is important to note that the first word does not have to be unloaded. The data outputs are noninverting with respect to the data inputs and are in the high-impedance state when the output-enable (OE) input is high.
The SN74ACT7814 is characterized for operation from 0C to 70C.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
SN74ACT7814-20DL Texas Instruments 64 x 18 asynchronous FIFO memory 56-SSOP 0 to 70
SN74ACT7814-20DLR Texas Instruments 64 x 18 asynchronous FIFO memory 56-SSOP 0 to 70
SN74ACT7814-25DL Texas Instruments 64 x 18 asynchronous FIFO memory 56-SSOP 0 to 70
SN74ACT7814-40DL Texas Instruments 64 x 18 asynchronous FIFO memory 56-SSOP 0 to 70
SN74ACT7814-40DLR Texas Instruments 64 x 18 asynchronous FIFO memory 56-SSOP 0 to 70
SN74ACT7814 's PackagesSN74ACT7814 's pdf datasheet
1M7814-40DLG4 SSOP
SN74ACT7814-20DL SSOP
SN74ACT7814-20DLR SSOP
SN74ACT7814-25DL SSOP
SN74ACT7814-25DLR SSOP
SN74ACT7814-40DL SSOP
SN74ACT7814-40DLR SSOP




SN74ACT7814 Pinout, Pinouts
SN74ACT7814 pinout,Pin out
This is one package pinout of SN74ACT7814,If you need more pinouts please download SN74ACT7814's pdf datasheet.

SN74ACT7814 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN74ACT7814 Pb-Free SN74ACT7814 Cross Reference SN74ACT7814 Schematic SN74ACT7814 Distributor
SN74ACT7814 Application Notes SN74ACT7814 RoHS SN74ACT7814 Circuits SN74ACT7814 footprint
Hot categories