4-Bit Synchronous Up/Down Binary Counters

The SN74ALS191A are synchronous 4-bit reversible up/down binary Counters Synchronous counting operation is provided by having all Flip-Flops clocked simultaneously so that the outputs change coincidentally with each other when instructed by the steering Logic This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple-clock) Counters
The outputs of the four Flip-Flops are triggered on a low-to-high-level transition of the Clock (CLK) input if the count enable () input is low. A high at inhibits counting. The direction of the count is determined by the level of the down/up (D/U) input. When D/U is low, the Counter counts up, and when D/U is high, the Counter counts down.
These Counters feature a fully independent Clock circuit. Changes at the control inputs ( and D/U) that modify the operating mode have no effect on the contents of the Counter until clocking occurs. The function of the Counter is dictated solely by the conditions meeting the stable setup and hold times.
These Counters are fully programmable. Each output CAN be preset to either level by placing a low on the input and entering the desired data at the data inputs. The output changes to agree with the data inputs independently of the level of the Clock input. This feature allows the Counters to be used as modulo-N dividers by simply modifying the count length with the preset inputs.
CLK, D/U, and are buffered to lower the drive requirement, which significantly reduces the loading on (current required by) Clock Drivers for long parallel words.
Two outputs are available to perform the cascading function: ripple Clock and maximum/minimum count. The latter output produces a high-level output pulse with a duration approximately equal to one complete cycle of the Clock while the count is minimum (0) counting down or maximum (15) counting up. The ripple-clock output () produces a low-level output pulse under those same conditions, but only while the Clock input is low. The Counter easily CAN be cascaded by feeding the ripple-clock output to the enable input of the succeeding Counter if parallel clocking is used, or to the Clock input if parallel enabling is used. The maximum/minimum count (MAX/MIN) output CAN be used to accomplish look ahead for high-speed operation.
The SN54ALS191A is characterized for operation over the full military temperature range of -55?C to 125?C. The SN74ALS191A is characterized for operation from 0?C to 70?C.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
SN74ALS191AD Texas Instruments 4-Bit Synchronous Up/Down Binary Counters 16-SOIC 0 to 70
SN74ALS191ADG4 Texas Instruments 4-Bit Synchronous Up/Down Binary Counters 16-SOIC 0 to 70
SN74ALS191ADR Texas Instruments 4-Bit Synchronous Up/Down Binary Counters 16-SOIC 0 to 70
SN74ALS191AN Texas Instruments 4-Bit Synchronous Up/Down Binary Counters 16-PDIP 0 to 70
SN74ALS191ANE4 Texas Instruments 4-Bit Synchronous Up/Down Binary Counters 16-PDIP 0 to 70
SN74ALS191ANSRE4 Texas Instruments ALS SERIES, SYN POSITIVE EDGE TRIGGERED 4-BIT BIDIRECTIONAL BINARY COUNTER, PDSO16, GREEN, PLASTIC, SOP-16
SN74ALS191ANSR Texas Instruments ALS SERIES, SYN POSITIVE EDGE TRIGGERED 4-BIT BIDIRECTIONAL BINARY COUNTER, PDSO16, GREEN, PLASTIC, SOP-16
SN74ALS191ADE4 Texas Instruments 4-Bit Synchronous Up/Down Binary Counters 16-SOIC 0 to 70
SN74ALS191ANSRG4 Texas Instruments IC ALS SERIES, SYN POSITIVE EDGE TRIGGERED 4-BIT BIDIRECTIONAL BINARY COUNTER, PDSO16, GREEN, PLASTIC, SOP-16, Counter
SN74ALS191ADRG4 Texas Instruments ALS SERIES, SYN POSITIVE EDGE TRIGGERED 4-BIT BIDIRECTIONAL BINARY COUNTER, PDSO16, GREEN, PLASTIC, MS-012AC, SOIC-16
SN74ALS191A 's PackagesSN74ALS191A 's pdf datasheet
SN74ALS191AD SOIC
SN74ALS191ADE4 SOIC
SN74ALS191ADG4 SOIC
SN74ALS191ADR SOIC
SN74ALS191ADRE4 SOIC
SN74ALS191ADRG4 SOIC
SN74ALS191AN PDIP
SN74ALS191ANE4 PDIP
SN74ALS191ANSR SO
SN74ALS191ANSRE4 SO
SN74ALS191ANSRG4 SO




SN74ALS191A Pinout, Pinouts
SN74ALS191A pinout,Pin out
This is one package pinout of SN74ALS191A,If you need more pinouts please download SN74ALS191A's pdf datasheet.

SN74ALS191A circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN74ALS191A Pb-Free SN74ALS191A Cross Reference SN74ALS191A Schematic SN74ALS191A Distributor
SN74ALS191A Application Notes SN74ALS191A RoHS SN74ALS191A Circuits SN74ALS191A footprint
Hot categories