1-Bit To 2-Bit Address Driver With 3-State Outputs

This 1-bit to 2-bit address driver is designed for 1.65-V to 3.6-V VCC operation.
Active bus-hold circuitry holds unused or undriven inputs at a valid Logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.
The outputs, which are designed to sink up to 12 mA, include equivalent 26- resistors to reduce overshoot and undershoot.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
SN74ALVCH162830DBBR Texas Instruments 1-Bit To 2-Bit Address Driver With 3-State Outputs 80-TSSOP -40 to 85
SN74ALVCH162830GR Texas Instruments 1-Bit To 2-Bit Address Driver With 3-State Outputs 80-TSSOP -40 to 85
SN74ALVCH162830 's PackagesSN74ALVCH162830 's pdf datasheet
74ALVCH162830GRE4 TSSOP
74ALVCH162830GRG4 TSSOP
SN74ALVCH162830DBBR TSSOP
SN74ALVCH162830GR TSSOP




SN74ALVCH162830 Pinout, Pinouts
SN74ALVCH162830 pinout,Pin out
This is one package pinout of SN74ALVCH162830,If you need more pinouts please download SN74ALVCH162830's pdf datasheet.

SN74ALVCH162830 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN74ALVCH162830 Pb-Free SN74ALVCH162830 Cross Reference SN74ALVCH162830 Schematic SN74ALVCH162830 Distributor
SN74ALVCH162830 Application Notes SN74ALVCH162830 RoHS SN74ALVCH162830 Circuits SN74ALVCH162830 footprint