16-Bit Bus Transceiver And Transparent D-Type Latch With 8 Independent Buffers

This device contains eight independent noninverting Buffers and a 16-bit noninverting Bus Transceiver and D-type latch, designed for 1.65-V to 3.6-V VCC operation.
The SN74ALVCH32973 is particularly suitable for demultiplexing an address/data bus into a dedicated address bus and dedicated data bus. The device is used where there is asynchronous bidirectional Communication between the A and B data bus, and the address signals are latched and buffered on the Q bus. The control-function implementation minimizes external Timing requirements.
This device CAN be used as one 8-bit Buffer two 8-bit transceivers, and two 8-bit Latches or one 8-bit Buffer one 16-bit transceiver, and one 16-bit latch. It allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the Logic level at the direction-control (DIR) input. The transceiver output-enable (TOE) input CAN be used to disable the transceivers so that the A and B buses effectively are isolated.
When the latch-enable (LE) input is high, the Q outputs follow the data (A) inputs. When LE is taken low, the Q outputs are latched at the levels set up at the A inputs. The latch output-enable (LOE) input CAN be used to place the nine Q outputs in either a normal Logic state (high or low Logic level) or the high-impedance state. In the high-impedance state, the Q outputs neither drive nor load the bus lines significantly. LOE does not affect internal operations of the latch. Old data CAN be retained or new data CAN be entered while the Q outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, LOE and TOE should be tied to VCC through pullup resistors; the minimum values of the resistors are determined by the current-sinking capability of the drivers.
The eight independent noninverting Buffers perform the Boolean function Y = D, and are independent of the state of DIR, TOE, LE, and LOE.
The A and B I/Os, and D inputs have bus-hold circuitry. Active bus-hold circuitry holds unused or undriven data inputs at a valid Logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
SN74ALVCH32973KR Texas Instruments 16-Bit Bus Transceiver and Transparent D-Type Latch with 8 Independent Buffers 96-LFBGA -40 to 85
SN74ALVCH32973 's PackagesSN74ALVCH32973 's pdf datasheet

SN74ALVCH32973 Pinout will be updated soon..., now you can download the pdf datasheet to check the pinouts !
SN74ALVCH32973 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN74ALVCH32973 Pb-Free SN74ALVCH32973 Cross Reference SN74ALVCH32973 Schematic SN74ALVCH32973 Distributor
SN74ALVCH32973 Application Notes SN74ALVCH32973 RoHS SN74ALVCH32973 Circuits SN74ALVCH32973 footprint